Design of aquifer remediation systems: (1) describing hydraulic structure and NAPL architecture using tracers

Aquifer heterogeneity (structure) and NAPL distribution (architecture) are described based on tracer data. An inverse modelling approach that estimates the hydraulic structure and NAPL architecture based on a Lagrangian stochastic model where the hydraulic structure is described by one or more populations of lognormally distributed travel times and the NAPL architecture is selected from eight possible assumed distributions. Optimization of the model parameters for each tested realization is based on the minimization of the sum of the square residuals between the log of measured tracer data and model predictions for the same temporal observation. For a given NAPL architecture the error is reduced with each added population. Model selection was based on a fitness which penalized models for increasing complexity. The technique is demonstrated under a range of hydrologic and contaminant settings using data from three small field-scale tracer tests: the first implementation at an LNAPL site using a line-drive flow pattern, the second at a DNAPL site with an inverted five-spot flow pattern, and the third at the same DNAPL site using a vertical circulation flow pattern. The Lagrangian model was capable of accurately duplicating experimentally derived tracer breakthrough curves, with a correlation coefficient of 0.97 or better. Furthermore, the model estimate of the NAPL volume is similar to the estimates based on moment analysis of field data.     

Effects of moderate pollution on toxic and trace metal levels in calves from a polluted area of northern Spain

This study evaluated the contribution of anthropogenic pollution to toxic metal residues (Cd, Pb and As) in cattle in an industrialized area of Asturias (northern Spain), and investigated possible implications of toxic metal exposure for metabolism of essential metal elements (Cu, Zn, Fe, Mn). Samples of liver, kidney, muscle and blood from animals aged 9-12 months were obtained from an industrialized area (78 calves) and from a rural area (92 calves). Samples were acid-digested, and levels of metals determined by atomic absorption spectrophotometry. Cadmium and lead contents in the liver and kidney were moderately and significantly higher in calves from the industrialized area (Cd: liver 29.6, kidney 161; Pb: liver 38.1, kidney 38.3 microg/kg wet weight) than in calves from the rural area (Cd: liver 22.9, kidney 96.4; Pb: liver 20.7, kidney 15.9 microg/kg kg wet weight). Although these toxic metals were only moderately raised, our results suggest that they may nevertheless have interfered with trace element metabolism, as reported previously for severely polluted regions. Notably, copper levels in calves from the industrialized area were generally low, and nearly half of these animals showed tissue copper levels indicating risk of copper deficiency.     

Treatment of wastewater effluents with Phillipsite-rich tuffs

The presence of abundant zeolites in association with volcanic pumiceous materials in Tererife (Canary Islands) prompted us to study their properties as a water purifying bed for inorganic contaminants, pathogenic bacteria, and soluble organic matter. The experimental model used was a chemical percolation reactor with a constant flux of solution, where the fixation kinetics were studied by comparing the input and the output solutions. The ammonium and phosphate retention values found after 10 days of constant percolation were 70% and 14%, respectively. In addition, a high reduction of soluble organic matter was observed, as well as the total removal of the bacteria species studied. The N-P-K values of the soluble and exchangeable nutrients indicate the potential capacity of the bed as a slow-release fertilizer.     

Determination of PAHs in diesel particulate matter using thermal extraction and solid phase micro-extraction

Determination of polycyclic aromatic hydrocarbons (PAHs) from chemical analysis of the diesel particulate matter (DPM) requires considerable sampling expertise and is often time-consuming because sample preparation demands strict extraction procedures due to the complex nature of the DPM matrix. In this study, a method to measure the emissions of the 16-U.S. Environmental Protection Agency (EPA) priority PAHs adsorbed in diesel particles has been developed. This method involves the capture of the DPM in glass microfibre filters, thermal extraction of the compounds from the particulate matrix in a thermogravimetric analyzer (TGA), determination of the concentration by means of a solid phase micro-extraction (SPME) fibre and subsequent analysis using a gas chromatograph coupled to a mass spectrometer (GC/MS). Analyses of a fully characterised DPM prepared by the National Institute of Standards and Technology, NIST (SRM 1650b), were performed and calculated errors showed that the method is capable of giving reliable quantitative data. Additionally, DPM collected from a diesel engine was analyzed and the results showed the high method sensitivity to the engine operating conditions.     

Residues of organochlorine pesticides,polychlorinated biphenyls and heavy metals in the eggs of predatory birds from Doñana National Park (Spain), 1980–1983

Abstract

Organochlorine pesticides and heavy metal residues were determined in 54 eggs of five species of predatory birds collected at Doñana National Park (Spain) during the nesting season between 1980 and 1983. The species analyzed were the imperial eagle (Aquila heliaca), the red kite (Milvus milvus), the black kite (Milvus migrans), the hobby (Falco subbuteo) and the booted eagle (Hieraetus pennatus). DDE, DDT and PCBs were detected in all samples. α‐HCH, α‐HCH, aldrin, dieldrin, heptachlor, heptachlor epoxide, TDE and dichlorobenzophenone were also detected but less frequently. The DDE content of eggs decreased in the period between 1972/1976 and 1980/1983, but the PCBs contents were stable. The declines are attributed to the restrictions on the use of DDT in most countries. Mercury, lead, cadmium, copper and zinc were detected in all samples. The levels of organochlorine pesticides, PCBs and heavy metals in these Falconiforme eggs are generally below the levels known to cause direct effects on survival or reproduction of birds.     

Detection of residual organochlorine and organophosphorus pesticides in agricultural soil in Rio Verde region of San Luis Potosi,Mexico

Organochlorine pesticides were intensively used in Mexico from 1950 until their ban and restriction in 1991. However, the presence of these compounds is commonly reported in many regions of the country. The aim of the present study was to identify and quantify residual organochlorine and organophosphorus pesticides in agricultural soil in Rio Verde region, San Luis Potosi state, which has been identified as possibly polluted by pesticides. Composed samples from 24 zones covering an area of approximately 5,440 ha were analyzed. The most frequently found pesticides were p,p´-DDT followed by ,p,p´-DDE, heptachlor, endosulfan and γ-HCH whose frequency rates were 100, 91, 83 and 54%, respectively. The concentration of p,p´-DDT in the crops grown in these soils was in the following order: chili > maize > tomato > alfalfa. The results obtained in this study show that p,p´-DDT values are lower or similar to those found in other agricultural regions of Mexico. Methyl and ethyl parathion were the most frequent organophosphate pesticide detected in 100% and 62.5% of the samples with average concentrations of 25.20 and 47.48 μg kg^–1, respectively. More research is needed to establish the background levels of pesticides in agricultural soils and their potential ecological and human health effects in this region.     

Reduction of the impact produced by sea lions on the fisheries in Mexico

Activities of fishermen in the Bay of La Paz, B. C. S. are focused to satisfy the local demand of fish and shellfish by using approximately 300 small outboard crafts equipped with gillnets.Sea lions in this Bay attack the fishes captured damaging both product and gear. We did experimental gillnet throws to determine the frequency and preferences of sea lions in fishing areas. 52 experimental gillnet throws with time averages of 2 hr were performed, rending an average of 30 kg of fish captured and less than 10% of damages to the net.. Traditional fishermen in this Bay usually left the net the whole night, (approximately 7.50 hr, obtaining an average of 50 kg of captured fish, but the damages to the nets is in average of 40%. The cost-benefit balance comparing our alternative fishing method, which includes the use of the gillnets during the afternoon, watching for sea lions and retiring the nets at their arrival, it is more sustainable and profitable than the traditional fishing method currently used by the local fishermen. This paper suggests how to minimize the harmful effects of the sea lions on the fishermen productivity and gear, maximizing the production and reducing the damage. Our alternative method is applicable to other regions where this harmful interaction is taking place. We conclude that the coexistence of sea lions-fisheries is feasible, by applying the simple measures that we propose.     

Cost-benefit analysis of water-reuse projects for environmental purposes: a case study for Spanish wastewater treatment plants

Water reuse is an emerging and promising non-conventional water resource. Feasibility studies are essential tools in the decision making process for the implementation of water-reuse projects. However, the methods used to assess economic feasibility tend to focus on internal costs, while external impacts are relegated to unsubstantiated statements about the advantages of water reuse. Using the concept of shadow prices for undesirable outputs of water reclamation, the current study developed a theoretical methodology to assess internal and external economic impacts. The proposed methodological approach is applied to 13 wastewater treatment plants in the Valencia region of Spain that reuse effluent for environmental purposes. Internal benefit analyses indicated that only a proportion of projects were economically viable, while when external benefits are incorporated all projects were economically viable. In conclusion, the economic feasibility assessments of water-reuse projects should quantitatively evaluate economic, environmental and resource availability.     

Coal cleaning residues and Fe-minerals implications

In the present investigation, a study was undertaken to understand the origin of Fe-minerals presents in Brazilian coal mining and to understand the environmental implication and the chemical heterogeneity in the study area. Coal cleaning residue samples rich in clays, quartz, sulphides, carbonates, sulphates, etc. were sampled from Lauro Muller, Urussanga, Treviso, Siderópolis, and Criciúma cities in the Santa Catarina State and a total of 19 samples were collected and Mössbauer, XRD, SEM/EDX, and TEM analyses were conducted on the samples. The major Fe-minerals identified are represented by the major minerals chlorite, hematite, illite, and pyrite, while the minor minerals include, ankerite, chalcopyrite, goethite, hematite, jarosite, maghemite, magnetie, marcasite, melanterite, natrojarosite, oligonite, pyrrhotite, rozenite, schwertmannite, siderite, and sideronatrile. Pyrite is relatively abundant in some cases, making up to around 10% of the mineral matter in several samples. The sulphates minerals such as jarosite and others, probably represent oxidation products of pyrite, developed during exposure or storage.     

Degradation of chlordecone and beta-hexachlorocyclohexane by photolysis, (photo-)fenton oxidation and ozonation

Intensive use of chlorinated pesticides from the 1960s to the 1990s has resulted in a diffuse contamination of soils and surface waters in the banana-producing areas of the French West Indies. The purpose of this research was, for the first time, to examine the degradation of two of these persistent pollutants – chlordecone (CLD) and beta-hexachlorocyclohexane (β-HCH) in 1 mg L^?1 synthetic aqueous solutions by means of photolysis, (photo-) Fenton oxidation and ozonation processes. Fenton oxidation is not efficient for CLD and yields less than 15% reduction of β-HCH concentration in 5 h. Conversely, both molecules can be quantitatively converted under UV-Vis irradiation reaching 100% of degradation in 5 h, while combination with hydrogen peroxide and ferrous iron does not show any significant improvement except in high wavelength range (>280 nm). Ozonation exhibits comparable but lower degradation rates than UV processes. Preliminary identification of degradation products indicated that hydrochlordecone was formed during photo-Fenton oxidation of CLD, while for β-HCH the major product peak exhibited C₃H₃Cl₂ as most abundant fragment.