Environmental Surveillance of SARS-CoV-2 RNA in Wastewater and Groundwater in Quintana Roo,Mexico

The presence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA in wastewater has been reported as a result of fecal shedding of infected individuals. In this study, the occurrence of SARS-CoV-2 RNA was explored in primary-treated wastewater from two municipal wastewater treatment plants in Quintana Roo, Mexico, along with groundwater from sinkholes, a household well, and submarine groundwater discharges. Physicochemical variables were obtained in situ, and coliphage densities were determined. Three virus concentration methods based on adsorption-elution and sequential filtration were used followed by RNA isolation. Quantification of SARS-CoV-2 was done by RT-qPCR using the CDC 2020 assay, 2019-nCoV_N1 and 2019-nCoV_N2. The Pepper mild mottle virus, one of the most abundant RNA viruses in wastewater was quantified by RT-qPCR and compared to SARS-CoV-2 concentrations. The use of three combined virus concentration methods together with two qPCR assays allowed the detection of SARS-CoV-2 RNA in 58% of the wastewater samples analyzed, whereas none of the groundwater samples were positive for SARS-CoV-2 RNA. Concentrations of SARS-CoV-2 in wastewater were from 1.8 × 10³ to 7.5 × 10³ genome copies per liter (GC l⁻¹), using the N1 RT-qPCR assay, and from 2.4 × 10² to 5.9 × 10³ GC l⁻¹ using the N2 RT-qPCR assay. Based on PMMoV prevalence detected in all wastewater and groundwater samples tested, the three viral concentration methods used could be successfully applied for SARS-CoV-2 RNA detection in further studies. This study represents the first detection of SARS-CoV-2 RNA in wastewater in southeast Mexico and provides a baseline for developing a wastewater-based epidemiology approach in the area.

     

Assessing disproportionate costs to achieve good ecological status of water bodies in a Mediterranean river basin

Water management is becoming increasingly important as the demand for water grows, diversifies, and includes more complex environmental concerns. The Water Framework Directive (WFD) seeks to achieve a good ecological status for all European Community water bodies by 2015. To achieve this objective, economic consideration of water management must be given to all decision-making processes. Exemption (time or level of stringency) from the objectives of the EU Directive can be justified by proving that the cost of implementing measures is disproportionate to the benefits. This paper addresses the issue of disproportionate costs through a cost-benefit analysis (CBA). To predict the costs, the function costs method is used. The quantification of environmental benefits is more complex, because they are not determined by the market. As an alternative to stated preference methods, we use the distance function approach to estimate the environmental benefits of improving water quality. We then apply this methodological approach to a Mediterranean River Basin in Spain. The results show that the achievement of good status could not be rejected based on the criterion of disproportionate costs in this river basin. This paper illustrates that CBA is a useful tool to inform policy and decision making. Furthermore, it is shown that economics, particularly the valuation of environmental benefits, plays a crucial role in fulfilling the environmental objectives of the WFD.     

The evolution of the pH in Europe (1986-1997) using panel data

The temporal evolution of pH values in precipitation over Europe during the period 1986-1997 is examined using panel data. The use of panel data techniques allows us to determine the temporal evolution of groups of stations rather than analyzing the temporal behavior of each of them. The analysis reveals three different temporal patterns: Peripheral, Central and French. We find a significant increasing trend (P < 0.00001) in both Peripheral and Central patterns. The annual increases are +0.057 pH-units yr(-1) and +0.022 pH-units yr(-1) respectively. However the French pattern is characterized by a significant decreasing trend (P < 0.004) and the annual decrease is -0.022 pH-units yr(-1). The standard errors of panel data estimates are around 47% smaller than those of classical pooling and 32% smaller than aggregate time-series regression. The use of panel data produces higher R2 values than classical pooling and aggregate data. This technique takes into account the individual heterogeneity, allows a larger number of data points and improves the efficiency of the estimates. In general, the policies of governments to reduce pollutant emissions seem to be effective.     

The importance of crossroads in faecal marking behaviour of the wolves (<Emphasis Type="Italic">Canis lupus</Emphasis>)

For wolves (Canis lupus) scats play an important function in territorial marking behaviour. Depositing scats at strategic sites such as crossroads and on conspicuous substrates probably increases their effectiveness as visual and olfactory marks. It is therefore likely that scats will be deposited, and will accumulate, at particular crossroads where the probability of being detected by other wolves is greatest. To check this hypothesis, a wolf population in NW Spain was studied for two consecutive years, from May 1998 to March 2000, and the spatial distribution of 311 scats detected along roads (both at and away from crossroads) was analysed. This study was conducted over an area of 12,000 ha in Montes do Invernadeiro Natural Park. The results confirm that wolves preferably deposit their scats at crossroads (60.1%) and on conspicuous substrates (72.1%). Significantly more scats were found at intersections with numerous, easily passable roads connecting distant territories. Thus, wolves preferably deposit their faeces at crossroads with high accessibility and driveability. The larger the surface area of the crossroads, the more scats were found. Crossroads are therefore highly strategic points that facilitate the detection of scats.     

New insights in analysing parasitoid attracting synomones: early volatile emission and use of stir bar sorptive extraction

Summary. It is well known that feeding by Pieris brassicae caterpillars on cabbage leaves triggers the release of volatiles that attract natural antagonists such as the parasitoid Cotesia glomerata. The temporal dynamics in the emissions of parasitoid attracting volatiles has never been elucidated in this system. In a time course experiment, caterpillar infested leaves attracted the parasitoid within one hour after infestation. At such an early stage of infestation, as much as fifty percent of the parasitoids flew towards the infested plant in a wind tunnel bioassay, while only five percent flew towards the non-infested control plant. Three hours after infestation and later, the response to the volatiles from the infested plant reached its maximum and then continued at a constantly high level for the remaining 14 hours of the experiment. Chemical analyses of volatiles collected from infested leaves at short time intervals during the first 24 hours identified a total of ten compounds, comprising green leaf volatiles, terpenoids, and a nitrile. Significant increase of emission within the first 5 hours following initial herbivory was detected for (Z)-3-hexen-1-ol, (Z)-3-hexen-1-yl acetate, cineole and benzylcyanide. Subsequently, a coupled bioassay-chemical analysis procedure was developed allowing for testing and analyzing the same sample for future identification of the bioactive compounds. This was achieved by using stir bar sorptive extraction for the analysis of solvent extracts of caterpillar-damaged leaves.     

Liquid chromatography-hydride generation-atomic absorption spectrometry for the speciation of tin in seafoods

Liquid chromatography with hydride generation atomic absorption spectrometry as the detection system was applied to the separation and determination of inorganic tin, tributyltin, dibutyltin, monobutyltin, diphenyltin and monophenyltin. A reversed phase C18 column and a methanol/water/acetic acid (70:27:3, v/v/v) mixture containing 0.05%(v/v) triethylamine and 0.1%(w/v) tropolone as the mobile phase (isocratic elution) were used. Extraction of organotins from the samples was carried out using methanol containing 0.05%(w/v) tropolone, a process that was repeated twice. The supernatants were shaken with water and dichloromethane in a separating funnel and the organic phase was collected and evaporated to dryness. When the method was applied to the speciation of tin in fresh and canned mussels, no organotins above the detection limits were identified in any of the samples, inorganic tin being the only species detected. The reliability of the procedure was checked by analyzing the total tin content of the samples by electrothermal atomic absorption spectrometry and by speciation of tin in a certified reference material, mussel tissue (CRM 477). The method can be used for environmental monitoring of organotins contaminated samples.     

Organic pollutant burden of the giant mussels Choromytilus chorus from the south-central Chilean coast

A comparative quantitative analysis was made on the contents of organochlorines (OCh) and polycyclic aromatic hydrocarbons (PAH) in tissues of the giant mussel Choromytilus chorus from three bays in south-central Chile exposed to various degrees of pollutant input. Mussels from the three bays contained levels of OCh near the detection limits of method, with a tendency to be slightly higher in the polluted bay (San Vicente) than in the other bays (Corral and Yaldad). PAH levels and types in Corral and Yaldad were well below of carcinogenicity permitted in mussels for human consumption.     

Biodegradation of phthalate esters during the mesophilic anaerobic digestion of sludge

Phthalic acid esters (PAE) are commonly found in the sludge generated in the wastewater treatment plants. Anaerobic digestion followed by land application is a common treatment and disposal practice of sludge. To date, many studies exist on the anaerobic biodegradation rates of PAE, especially of the easily biodegradable ones, whereas the higher molecular weight PAE have reported to be non-biodegradable under methanogenic conditions. Furthermore, there is no information on the effect of the PAE on the performance of the anaerobic digesters treating sludge. In this study, the anaerobic biodegradation of di-n-butyl phthalate (DBP), di-ethyl phthalate (DEP) and di-ethylhexyl phthalate (DEHP) was investigated and their relative rates of anaerobic degradation were calculated. Also, the biological removal of PAE during the anaerobic digestion of sludge in bench-scale digesters was investigated using DBP and DEHP as model compounds of one biodegradable and one recalcitrant PAE respectively. The degradation of all the PAE tested in this study (DEP, DBP and DEHP) is adequately described by first-order kinetics. Batch and continuous experiments showed that DEP and DBP present in sludge are rapidly degraded under mesophilic anaerobic conditions (a first-order kinetic constant of 8.04 x 10(-2) and 13.69 x 10(-2)-4.35 day(-1) respectively) while DEHP is degraded at a rate between one to two orders of magnitude lower (0.35 x 10(-2)-3.59 x 10(-2) day(-1)). It is of high significance that experiments with anaerobic sludge of different origin (US and Europe) showed that degradation of DEHP occurs under methanogenic conditions. Accumulation of high levels of DEHP (more than 60 mg/l) in the anaerobic digester has a negative effect on DBP and DEHP removal rates as well as on the biogas production.     

Design of aquifer remediation systems: (2) estimating site-specific performance and benefits of partial source removal

A Lagrangian stochastic model is proposed as a tool that can be utilized in forecasting remedial performance and estimating the benefits (in terms of flux and mass reduction) derived from a source zone remedial effort. The stochastic functional relationships that describe the hydraulic "structure" and non-aqueous phase liquid (NAPL) "architecture" have been described in a companion paper (Enfield, C.G., Wood, A.L., Espinoza, F.P., Brooks, M.C., Annable, M., Rao, P.S.C., this issue. Design of aquifer remediation systems: (1) describing hydraulic structure and NAPL architecture using tracers. J. Contam. Hydrol.). The previously defined functions were used along with the properties of the remedial fluids to describe remedial performance. There are two objectives for this paper. First, is to show that a simple analytic element model can be used to give a reasonable estimate of system performance. This is accomplished by comparing forecast performance to observed performance. The second objective is to display the model output in terms of change in mass flux and mass removal as a function of pore volumes of remedial fluid injected. The modelling results suggest that short term benefits are obtained and related to mass reduction at the sites where the model was tested.