Polychloroprene Degradation by Photo-Fenton. Conductivity Measures as New Approach for Detecting/Evaluation of Degradation Products

In the present work the photo-degradation of polychloroprene (PCP) in toluene solution catalyzed by FeCl₃·6H₂O and polychromatic light was investigated based on FTIR and ¹³C NMR spectroscopies, on conductivity measurements and DSC technique. The band in the 1700–1790 cm⁻¹ range in the FTIR spectrum characterized the presence of carbonyl products due to the degradation of the PCP on the solution exposed to polychromatic light. The formation of carbonyl on degraded PCP was confirmed by the presence of signal on ¹³C NMR at δ 203.5. Products of PCP degradation, such as acid chlorides, generated in the toluene solution migrate to the aqueous phase (in contact with toluene phase) and the conductivity of aqueous phase increased as the time is elapsed. The area related to the PCP melting-peak on the DSC (film casted after the PCP-FeCl₃·6H₂O toluene solution has been exposed to polychromatic light) significantly decreased in comparison to that in the DSC of the raw PCP cast film.     

Effects of repeated fumonisin B1 exposure on markers of oxidative stress in liver,kidneys, and lungs of C57BL/6 mice

Abstract

Fu monisin B₁ (FB₁) is a mycotoxin commonly found in maize and maize-based products. Ingestion of FB₁-contaminated causes a myriad of dose- and species-dependent toxic effects to human and animal health. In the present study we evaluated the effects of FB₁ (8?mg/kg, i.p. for 4?days) on body weight and oxidative stress parameters in the liver, kidney and lung of C57BL/6 male mice. No changes in the organ-to-body weight ratio, organ-to-adrenal gland weight ratio or organ-to-brain weight ratio were found. On the other hand, FB₁ exposure increased NPSH levels in liver and lungs whereas decreased FRAP content in liver and kidneys. Levels of TBARS, ascorbic acid and NOx content were not altered by FB₁. In summary, four days of FB₁ exposure are sufficient to disrupt antioxidant defenses in liver, kidneys and lungs of C57BL/6 male mice without concomitant changes in organs weight.     

Sources of phenolic compounds in two catchments of southern Portugal - effect of season, land use and soil type

Water quality monitoring in reservoirs used for human water consumption, carried out by the Alentejo Regional Authorities of the Environment (south Portugal), revealed seasonal peaks of phenolic compounds above the water-quality legislation. The main objectives of this work were to identify the main phenolic compounds present in water and soil leachates, and to determine the sources of the seasonal concentrations of phenolic compounds in two catchments with different land use patterns: Roxo and Santa Clara catchments. The main phenolic compound detected was 2,4-dinitrophenol (2,4-DNP), both in stream water and soil leachates, with concentrations higher in Roxo catchment. Roxo catchment represents a larger agricultural area than Santa Clara, and it is likely that the origin of the 2,4-DNP is associated with the use of pesticides. A peak of 2,4-DNP concentrations was observed in stream water of both catchments during February, when farmers plough their fields and apply pesticides. The 2,4-DNP peak was probably caused by a precipitation event shortly after the application of pesticides, increasing their transfer from land surfaces to adjacent streams. The leaching behaviour of 2,4-DNP was strongly dependent on the type of soil and pH. In soils with high clay content and low pH, 2,4-DNP was easily adsorbed, and its runoff from the soil to adjacent streams was reduced. Ribeira de Santa Vitória, from Roxo catchment, was the only stream showing a high abundance of vegetation, and the lowest concentrations of 2,4-DNP in water. Plants may play a role in removing contaminants from stream water.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

The effects of sport fishing growth on behavior of commercial fishermen in Balbina reservoir, Amazon, Brazil

An important alternative for sustainable use of tucunaré stocks and improvement in fishermen welfare in Balbina reservoir, Central Amazon, would be to train commercial fisherman to also become tourist guides for sport fishing. In this study, we modeled fishermen response to this question, in order to evaluate the acceptance of such an idea. Thus, we surveyed 47 fishermen, who currently comprise approximately 75% of the total fishermen population. This survey was implemented during December of 2001 and January of 2002. We used a probity analysis to run two models. The first model includes the variables: family size, school level, fishing time, residence time and boat ownership. On the other hand, the second model includes the number of children under and above eight years old but not the family size. Both models are significant and the most relevant variables are: fishing time (years of participation of fisherman is in the activity) and residence time (length of residency of particular fishermen live at the village nearby the reservoir).     

The ability of biological and organic synthetic materials to accumulate atmospheric particulates containing copper, lead, nickel and strontium

This work was aimed at finding materials that could be used as alternatives to lichens as air quality monitors since the high natural variability and the large amount of lichen collected are two drawbacks of the use of these organisms. Lichen Flavoparmelia caperata(L.) Hale was exposed in three different forms (transplant, detached from the substratum and as a biomass-ground and homogeneized) and compared to the planetree bark (Platanus hybrida Brot.), exposed as a biomass, and two organic synthetic materials (Chelex(R) 100 resin and cellulose acetate). Materials were exposed for two months in the winter, spring and summer, at three Portuguese coastal cities. The results showed that the airborne accumulations of Cu, Ni, Pb and Sr were partially dependent on the meteorological conditions but mainly dependent on the nature of the exposed material. The standard deviations of the synthetic materials or homogenized biomass were the same or greater than lichen transplants or detached. The accumulation by biological materials, of the four studied elements, was comparable to the lichen transplant accumulation. The replacement of the traditional transplants by the biomass was not considered advantageous, since their preparation is time-consuming. Therefore lichens remain the most suitable in biomonitoring studies. The exposure of detached lichen allows the accurate measurement of the exposed area/volume so it can be useful to relate atmospheric deposition rates with the lichen metal content. The synthetic materials accumulated Cu and Ni and should only be used as an alternative to traditional transplants when these are the elements of interest.     

E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

Smoke emissions from biomass burning in a Mediterranean shrubland

Gaseous and particulate samples from the smoke from prescribed burnings of a shrub-dominated forest with some pine trees in Lousã Mountain, Portugal, in May 2008, have been collected. From the gas phase Fourier transform infrared (FTIR) measurements, an average modified combustion efficiency of 0.99 was obtained, suggesting a very strong predominance of flaming combustion. Gaseous compounds whose emissions are promoted in fresh plumes and during the flaming burning phase, such as CO₂, acetylene and propene, produced emission factors higher than those proposed for savannah and tropical forest fires. Emission factors of species that are favoured by the smouldering phase (e.g. CO and CH₄) were below the values reported in the literature for biomass burning in other ecosystems. The chemical composition of fine (PM_2.5) and coarse (PM_2.5–10) particles was achieved using ion chromatography (water-soluble ions), instrumental neutron activation analysis (trace elements) and a thermal–optical transmission technique (organic carbon and elemental carbon). Approximately 50% of the particulate mass was carbonaceous in nature with a clear dominance of organic carbon. The organic carbon-to-elemental carbon ratios up to 300, or even higher, measured in the present study largely exceeded those reported for fires in savannah and tropical forests. More than 30 trace elements and ions have been determined in smoke aerosols, representing in total an average contribution of about 7% to the PM₁₀ mass.     

Effect of particulate matter, atmospheric gases, temperature, and humidity on respiratory and circulatory diseases’ trends in Lisbon, Portugal

This study addresses the significant effects of both well-known contaminants (particles, gases) and less-studied variables (temperature, humidity) on serious, if relatively common, respiratory and circulatory diseases. The area of study is Lisbon, Portugal, and time series of health outcome (daily admissions in 12 hospitals) and environmental data (daily averages of air temperature, relative humidity, PM₁₀, SO₂, NO, NO₂, CO, and O₃) have been gathered for 1999–2004 to ascertain (1) whether concentrations of air pollutants and levels of temperature and humidity do interfere on human health, as gauged by hospital admissions due to respiratory and circulatory ailments; and (2) whether there is an effect of population age in such admissions. In general terms, statistically significant (p?<?0.001) correlations were found between hospital admissions and temperature, humidity, PM₁₀, and all gaseous pollutants except CO and NO. Age appears to influence respiratory conditions in association with temperature, whereas, for circulatory conditions, such an influence likely involves temperature as well as the gaseous pollutants NO₂ and SO₂.