Oxygenated gasoline release in the unsaturated zone - Part 1: Source zone behavior

Oxygenates present in gasoline, such as ethanol and MTBE, are a concern in subsurface contamination related to accidental spills. While gasoline hydrocarbon compounds have low solubility, MTBE and ethanol are more soluble, ethanol being completely miscible with water. Consequently, their fate in the subsurface is likely to differ from that of gasoline. To evaluate the fate of gasoline containing oxygenates following a release in the unsaturated zone shielded from rainfall/recharge, a controlled field test was performed at Canadian Forces Base Borden, in Ontario. 200L of a mixture composed of gasoline with 10% ethanol and 4.5% MTBE was released in the unsaturated zone, into a trench 20cm deep, about 32cm above the water table. Based on soil cores, most of the ethanol was retained in the source, above the capillary fringe, and remained there for more than 100 days. Ethanol partitioned from the gasoline to the unsaturated pore-water and was retained, despite the thin unsaturated zone at the site (~35cm from the top of the capillary fringe to ground surface). Due to its lower solubility, most of the MTBE remained within the NAPL as it infiltrated deeper into the unsaturated zone and accumulated with the gasoline on top of the depressed capillary fringe. Only minor changes in the distribution of ethanol were noted following oscillations in the water table. Two methods to estimate the capacity of the unsaturated zone to retain ethanol are explored. It is clear that conceptual models for sites impacted by ethanol-fuels must consider the unsaturated zone.     

The use of GIS for the integration of traditional and scientific knowledge in supporting artisanal fisheries management in southern Brazil

The integration of local harvesters' knowledge of attitudes and practices toward the resources they harvest with scientific information is essential to natural resources management. However, the development and implementation of management policies have, in most cases, not been effective because of a failure to use all available sources of information and knowledge. In fisheries management, local knowledge is usually not collected in a systematic format and little published literature has discussed the use of local knowledge data collection and analysis methods. This paper describes the implementation of geographic information systems to systematize, analyze, and display traditional and scientific information to support fisheries management in the Patos Lagoon Estuary, southern Brazil. Artisanal fishing data were documented through a series of interviews conducted during and after fishing trips at harvest spots, and scientific data on environmental variables were obtained from different research institutions. A multi-layer GIS database integrating local fishers' and scientific knowledge information was developed with ArcGIS 8.3 ArcView tools to integrate and translate information into an accessible and interpretable format. The geo-spatial database interface allowed the selection of specific data characteristics by target species, harvest areas, fishers' communities, fishing gear, catch-per-unit of effort (CPUE), and monthly landings. The observed fishing spatial dynamics presented among the fishers' communities shows that, in most cases, artisanal fishermen tend to concentrate in shallow estuarine waters surrounding their villages.     

Inoculation of plant growth promoting bacterium Achromobacter xylosoxidans strain Ax10 for the improvement of copper phytoextraction by Brassica juncea

In this study, a copper-resistant plant growth promoting bacterial (PGPB) strain Ax10 was isolated from a Cu mine soil to assess its plant growth promotion and copper uptake in Brassica juncea. The strain Ax10 tolerated concentrations up to 600 mg CuL(-1) on a Luria-Bertani (LB) agar medium and utilized 1-aminocyclopropane-1-carboxylic acid (ACC) as a sole N source in DF salts minimal medium. The strain Ax10 was characterized as Achromobacter xylosoxidans based on its 16S rDNA sequence homology (99%). The bacterium A. xylosoxidans Ax10 has also exhibited the capability of producing indole acetic acid (IAA) (6.4 microg mL(-1)), and solubilizing inorganic phosphate (89.6 microg mL(-1)) in specific culture media. In pot experiments, inoculation of A. xylosoxidans Ax10 significantly increased the root length, shoot length, fresh weight and dry weight of B. juncea plants compared to the control. This effect can be attributed to the utilization of ACC, production of IAA and solubilization of phosphate. Furthermore, A. xylosoxidans Ax10 inoculation significantly improved Cu uptake by B. juncea. Owing to its wide action spectrum, the Cu-resistant A. xylosoxidans Ax10 could serve as an effective metal sequestering and growth promoting bioinoculant for plants in Cu-stressed soil. The present study has provided a new insight into the phytoremediation of Cu-contaminated soil.     

Bioaccumulation behaviour of transplants of the lichen Flavoparmelia caperata in relation to total deposition at a polluted location in Portugal

This experiment compares the short and long time element accumulation behaviour of transplants of Flavoparmelia caperata lichen thalli and total deposition in an atmospheric polluted area. It was found that lichens exposed for a short time behaved differently from lichens in cumulative exposition suggesting the presence of acclimatization behaviour. The lichen transplant elemental content does not unequivocally represent the average or cumulative environmental availability of the exposure period. Reflection characteristics depend on the element and the lichen physiological conditions. Good correlations between lichen elemental contents and total deposition were obtained when a physiological lichen parameter was introduced in a mathematical model, suggesting that metabolically mediated accumulation is important.     

Elemental levels in tree-bark and epiphytic-lichen transplants at a mixed environment in mainland Portugal, and comparisons with an in situ lichen

Samples of Platanus hybrida Brot. bark and Flavoparmelia caperata (L.) Hale thalli, from a clean area in northern Portugal (Bai?o), were transplanted into an exposure location at the south-western Atlantic coast, impacted by urban-industrial emissions (Sines), for a 10-month long experiment. Bark pieces were confined into nylon bags (2-mm mesh), and lichen thalli kept with their bark substrate (Pinus pinaster (Ait.) Sol.). Every two months, a double set of transplants (one for bark, one for lichens) was brought back into the laboratory, together with native samples of Evernia prunastri (L.) Ach. Following suitable cleansing and preparation procedures, field samples were put through INAA for elemental assessment. The results indicate that, regardless of signal magnitude, (1) concentrations in bark and lichen transplants are significantly correlated with atmospheric deposition for an appreciable number of elements; (2) there are a number of significant correlations between transplanted and native samples, and again between the latter and the deposition; and (3) the elements with biological patterns that follow the deposition in either transplanted or native samples (Co, V) are the very ones whose bioaccumulation seems to benefit from an alternation of wet-dry periods, which fits the precipitation record of the test site during the exposure term.     

Funneliformis mosseae and Invasion by Exotic Legumes in a Brazilian Tropical Seasonal Dry Forest

Russian Journal of Ecology - Parkinsonia aculeata and Prosopis juliflora are two of the most problematic invasive plant species in the Brazilian tropical seasonal dry forest, but the mechanisms...     

Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

Evaluation of modeling as a tool to determine the potential impacts related to drilling wastes in the Brazilian offshore

Numerical models that predict the fate of drilling discharges at sea constitute a valuable tool for both the oil industry and regulatory agencies. In order to provide reliable estimates, models must be validated through the comparison of predictions with field or laboratory observations. In this paper, we used the Offshore Operators Committee Model to simulate the discharges from two wells drilled at Campos Basin, offshore SE Brazil, and compared the results with field observations obtained 3 months after drilling. The comparison showed that the model provided reasonable predictions, considering that data about currents were reconstructed and theoretical data were used to characterize the classes of solids. The model proved to be a valuable tool to determine the degree of potential impact associated to drilling activities. However, since the accuracy of the model is directly dependent on the quality of input data, different possible scenarios should be considered when used for forecast modeling.