Costs, benefits, and plasticity of construction of nest defensive structures in paper wasps

Various animals build nests with defensive structures to deter predation on offspring. Construction of nest defensive structures can reduce the probability of predation but will involve various costs. Here, we examined both the costs and benefits of the construction of a nest defensive structure in a paper wasp, Polistes chinensis antennalis, and clarify whether the paper wasp changes the level of defensive structures of nests depending on predation risk. A foundress (queen) of the paper wasp starts a colony in spring and maintains her nest alone until the emergence of workers. At this stage, pupae in the nests are sometimes preyed on by conspecifics of other nests. The intruder needs to break the cocoon, which seals the entrance of the cell, to extract the pupa from the cell. Foundresses often apply nest material (pulp) to the surface of cocoons in their nests. We found that pulp on a cocoon increased the time an intruder required to break the cocoon. This result shows that the pulp structure on cocoons helps to prevent predation on pupae. On the other hand, pulp on cocoons involved costs, including time required to collect pulp and being a potential obstacle to the emergence of workers from the cocoon. Additionally, we found that the amount of pulp on cocoons was greater in nests under higher predation risk than nests under lower predation risk. These results suggest that pulp on cocoons is a nest defensive structure, and foundresses adjusted the construction of the defensive structure depending on predation risk.     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States

To improve U.S. air quality, there are many regulations on-the-way (OTW) and on-the-books (OTB), including mobile source California Low Emission Vehicle third generation (LEV III) and federal Tier 3 standards. This study explores the effects of those regulations by using the U.S. Environmental Protection Agency's (EPA) Community Multiscale Air Quality (CMAQ) model for 8-hr ozone concentrations in the western and eastern United States in the years 2018 and 2030 during a month with typical high ozone concentrations, July. Alterations in pollutant emissions can be due to technological improvements, regulatory amendments, and changes in growth. In order to project emission rates for future years, the impacts of all of these factors were estimated. This study emphasizes the potential light-duty vehicle emission changes by year to predict ozone levels. The results of this study show that most areas have decreases in 8-hr ozone concentrations in the year 2030, although there are some areas with increased concentrations. Additionally, there are areas with 8-hr ozone concentrations greater than the current U.S. National Ambient Air Quality Standard level, which is 75 ppb.

Implications:

To improve U.S. air quality, many regulations are on the way and on the books, including mobile source California LEV III and federal Tier 3 standards. This study explores the effects of those regulations for 8-hr ozone concentrations in the western and eastern United States in the years 2018 and 2030. The results of this study show that most areas have decreases in 8-hr ozone concentrations in 2030, although there are some areas with increased concentrations. Additionally, there are areas with 8-hr ozone concentrations greater than the current U.S. National Ambient Air Quality Standard level.     

Determination of PCBs, PCDDs and PCDFs in insulating oil samples from stored Chinese electrical capacitors by HRGC/HRMS

Homologue and congener profiles of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in commercial PCBs formulations are key information for the source identification of PCBs contamination as well as for the risk assessment caused by potential exposure. The isotope dilution technology in combination with high resolution gas chromatography-high resolution mass spectrometry (HRGC/HRMS) has made the accurate determination of such profiles possible. So far, various commercial PCB formulations except Chinese products have been successfully determined. Two PCBs containing insulating oil samples from stored Chinese electrical capacitors have been determined with the same methodology for comparability. The total concentration PCBs in two oil samples were 790 000 μg g⁻¹ and 720 000 μg g⁻¹, respectively. TriCBs, TetraCBs, and DiCBs were found to be most abundant. Concentration of dioxins contamination in two samples is 650-670 ngTEQ g⁻¹, of which 69-71 ngTEQ g⁻¹ from PCDD/Fs with the predominant congeners of 1,2,7,8-TeCDF; 2,3,7,8-TeCDF; 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDF. The contributions of DL-PCBs in total TEQ in both samples were more than 85%. The dioxin-like toxicity in insulating oils contained in electrical capacitors could be considered receive attention as an important dioxins source if such wastes are not managed in an environmentally sound manner.     

A needs analysis method for land-use planning of illegal dumping sites: A case study in Aomori–Iwate,Japan

Land use at contaminated sites, following remediation, is often needed for regional redevelopment. However, there exist few methods of developing economically and socially feasible land-use plans based on regional needs because of the wide variety of land-use requirements. This study proposes a new needs analysis method for the conceptual land-use planning of contaminated sites and illustrates this method with a case study of an illegal dumping site for hazardous waste. In this method, planning factors consisting of the land-use attributes and related facilities are extracted from the potential needs of the residents through a preliminary questionnaire. Using the extracted attributes of land use and the related facilities, land-use cases are designed for selection-based conjoint analysis. A second questionnaire for respondents to the first one who indicated an interest in participating in the second questionnaire is conducted for the conjoint analysis to determine the utility function and marginal cost of each attribute in order to prioritize the planning factors to develop a quantitative and economically and socially feasible land-use plan. Based on the results, site-specific land-use alternatives are developed and evaluated by the utility function obtained from the conjoint analysis. In this case study of an illegal dumping site for hazardous waste, the uses preferred as part of a conceptual land-use plan following remediation of the site were (1) agricultural land and a biogas plant designed to recover energy from biomass or (2) a park with a welfare facility and an athletic field. Our needs analysis method with conjoint analysis is applicable to the development of conceptual land-use planning for similar sites following remediation, particularly when added value is considered.     

Estimation of methane emission rate changes using age-defined waste in a landfill site

Long term methane emissions from landfill sites are often predicted by first-order decay (FOD) models, in which the default coefficients of the methane generation potential and the methane generation rate given by the Intergovernmental Panel on Climate Change (IPCC) are usually used. However, previous studies have demonstrated the large uncertainty in these coefficients because they are derived from a calibration procedure under ideal steady-state conditions, not actual landfill site conditions. In this study, the coefficients in the FOD model were estimated by a new approach to predict more precise long term methane generation by considering region-specific conditions. In the new approach, age-defined waste samples, which had been under the actual landfill site conditions, were collected in Hokkaido, Japan (in cold region), and the time series data on the age-defined waste sample’s methane generation potential was used to estimate the coefficients in the FOD model. The degradation coefficients were 0.050 1/y and 0.062 1/y for paper and food waste, and the methane generation potentials were 214.4 mL/g-wet waste and 126.7 mL/g-wet waste for paper and food waste, respectively. These coefficients were compared with the default coefficients given by the IPCC. Although the degradation coefficient for food waste was smaller than the default value, the other coefficients were within the range of the default coefficients. With these new coefficients to calculate methane generation, the long term methane emissions from the landfill site was estimated at 1.35 × 10⁴ m³-CH₄, which corresponds to approximately 2.53% of the total carbon dioxide emissions in the city (5.34 × 10⁵ t-CO₂/y).     

Mandibular morphogenesis during soldier differentiation in the damp-wood termite<Emphasis Type="Italic"> Hodotermopsis sjoestedti</Emphasis> (Isoptera: Termopsidae)

The conspicuous morphogenesis during termite soldier differentiation is one of the most remarkable examples of specialized caste development in social insects. To clarify the mechanism of morphological changes during soldier differentiation, mandibular morphogenesis prior to the presoldier moult was examined in the damp-wood termite Hodotermopsis sjoestedti. Using experimental induction of presoldier differentiation from pseudergates (7th or later instar larvae) by the application of juvenile hormone analogue (JHA), we compared mandibular morphogenesis in a presoldier moult (from pseudergate to presoldier) with that of a stationary moult (from pseudergate to pseudergate). Future presoldier mandibles were formed under the old mandibular cuticle of the pseudergates just prior to the presoldier moult. Multiple folds of both epidermis and new cuticle were observed in the developing mandible, and large concavities between teeth were formed on the mandibular surface. While in the stationary moult, the future mandibles were formed with a smooth surface. The process of the mandibular morphogenesis in soldier differentiation explains the allometry of soldier mandibles. The morphological differences in mouth parts between castes arise from a switching mechanism that triggers caste-specific mandibular epithelial growth during development.     

Genome size of termites (Insecta, Dictyoptera, Isoptera) and wood roaches (Insecta, Dictyoptera, Cryptocercidae)

The evolution of genome size has been discussed in relation to the evolution of various biological traits. In the present study, the genome sizes of 22 dictyopteran species were estimated by Feulgen image analysis densitometry and 6-diamidino-2-phenylindole (DAPI)-based flow cytometry. The haploid genome sizes (C-values) of termites (Isoptera) ranged from 0.58 to 1.90 pg, and those of Cryptocercus wood roaches (Cryptocercidae) were 1.16 to 1.32 pg. Compared to known values of other cockroaches (Blattaria) and mantids (Mantodea), these values are low. A relatively small genome size appears to be a (syn)apomorphy of Isoptera + Cryptocercus, together with their sociality. In some phylogenetic groups, genome size evolution is thought to be influenced by selective pressure on a particular trait, such as cell size or rate of development. The present results raise the possibility that genome size is influenced by selective pressures on traits associated with the evolution of sociality.