Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Physical resuspension and vertical mixing of sediments on a high energy continental margin (Sydney, Australia)

Four sediment cores from the continental margin adjacent to Sydney were analyzed for 210Pb, 137Cs, trace metals (Ag, Cd, Co, Cu, Mn, Ni, Pb, Zn), iron, dry bulk density, mud and moisture content. The concentrations of trace metals in the total sediment are low at all sites, although slightly elevated concentrations of Ag, Cu, Pb and Zn are present in the fine fraction of sediment (< 62.5 microns) near a major ocean outfall. Concentrations of trace metals in the fine fraction of sediment are similar in the upper 10-15 cm, indicating strong vertical mixing of the sediments, whereas an upward coarsening grain size in the upper 1-3 cm of sediment supports physical resuspension during storms. Sediment accumulation rates on the middle shelf adjacent to Sydney were estimated from downcore profiles of 210Pb and 137Cs and range between 0.2 and 0.4 cm yr-1. Although the mass fluxes of Cu, Pb and Zn within a distance of 2 km from the outfall (up to 36.1, 30.8 and 86.2 micrograms cm-2 yr-1, respectively) are greater than 20 km north of the outfall (< 23.5 micrograms cm-2 yr-1), the low concentrations of trace metals in sediments near the outfall support an efficient dispersal of anthropogenic contaminants on this continental margin.     

Decolorization of Remazol Black-B using a thermotolerant yeast, Kluyveromyces marxianus IMB3

The ability of Kluyveromyces marxianus IMB3 to decolorize Remazol Black-B dye was investigated. The effect of environmental conditions, such as pH and temperature were examined. No noticeable effects on decolorization were observed when pH varied from 3.0-5.5. Maximum colour removal, 98%, was achieved at 37 degrees C. Little or no colour removal was detected when K. marxianus IMB3 was incubated under anaerobic conditions. Further investigation, in which decolorization was monitored under extreme temperatures and low pH (to inhibit growth) and using ten fold dense inoculum, revealed that decolorization was due to biosorption to the yeast cells and not due to a metabolic reaction.     

The Response of Hydrophytes to Environmental Pollution with Heavy Metals

The effects of Cu²⁺, Cd²⁺, and Ni²⁺ at low and high concentrations (0.025 and 0.25 mg/ml) on the accumulation capacity, the state of the pigment complex, and photosynthesis rate have been studied in model experiments with three floating hydrophytes (Hydrocharis morsus-ranae L., Lemna gibba L., and Potamogeton natans L.) and four submerged hydrophytes (Elodea canadensis Michx., Lemna trisulka L., Ceratophyllum demersum L., and Potamogeton lucens L.). Copper and cadmium are especially toxic at the concentrations studied. The effect of Cu²⁺ was the strongest in hydatophytes, and the effect of Cd²⁺, in pleustophytes. It is hypothesized that the differences between hydrophytes with respect to accumulation of metals and decrease in photosynthesis rate may cause predominant elimination of submerged species. Therefore, changes in the species structure of hydrophyte communities may be expected in waters polluted with metals.     

Carbon Emission from the Surface of Coarse Woody Debris in Korean Pine Forests of Southern Primorye

Carbon dioxide fluxes from the surface of coarse woody debris (CWD) have been measured in Korean pine forests of the southern Sikhote-Alin mountain range. The seasonal dynamics of oxidative conversion of CWD carbon have been evaluated, and average values of the CO₂ emission rate have been determined for CWD fragments of three tree species at different stages of decomposition. The degree of decomposition is an important factor of spatial variation in CO₂ emission rate, and temporal variation in this parameter is adequately described by an exponential function of both CWD temperature and air temperature (R² = 0.65–0.75).     

Management of an Agroecosystem

Agroecosystems (AESs) are autotrophic ecosystems managed by man. The goal of the management is to obtain the maximum possible amount of high-quality agricultural products while preserving agricultural resources, primarily the soils and biodiversity. The main components of the management of AES structures and functions, including primary and secondary biological production, the ratio between the energy flows in the plant–man and plant–livestock–man food chains, the efficiency of energy transfer in the plant–livestock link, and conservation of agricultural resources, are considered.     

Pectenotoxins--an issue for public health: a review of their comparative toxicology and metabolism.

Pectenotoxins (PTXs) are a group of toxins associated with diarrhetic shellfish poisoning (DSP) and isolated from DSP toxin-producing dinoflagellate algae. Consumption of shellfish contaminated with PTXs has been associated with incidences of severe diarrhetic illness resulting in hospitalisation. Concern has been raised for public health following the discovery that these toxins are not only hepatotoxic and can cause diarrhetic effects in mammals, but that they are potently cytotoxic to human cancer cell lines and have been found to be tumour promoters in animals. With advances in knowledge and technology, more PTXs are being identified, but little is known of their toxicology and the potential impact these toxins may have on public health in the long term. Without such information, adequate health-risk assessments for the consumption of shellfish contaminated with PTXs cannot be performed. This review gives a brief introduction to diarrhetic shellfish toxins, details the known toxicology and metabolism of PTXs in animals, and discusses known incidences of PTX poisoning in humans.     

The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.     

Heat wave vulnerability and exposure mapping for Osaka City,Japan

Heat waves and heat-related stresses are increasing environmental concerns in urban areas. The impact of heat waves is dependent on the intensity and duration of each event and on underlying environmental and socio-demographic factors which influence population vulnerability. In order to develop effective adaptation strategies, it is important to develop a method to clearly identify the most vulnerable areas based on these factors. The purpose of this study is to develop and map a heat wave vulnerability index combined with heat exposure analysis to identify areas where interventions can be targeted. The vulnerability index was derived from a principle component analysis of eight key variables that influence heat wave vulnerability. Eight proxy measures of vulnerability were obtained from 2010 census and land-use data for the 1904 census districts of Osaka City. Three principle components explained >77 % of the variance (age, employment and education; social isolation; density and lack of green space). The components were combined and weighted to produce a vulnerability score for each census district. The vulnerability scores ranged from 0 to 106, were categorised into eight vulnerability levels and were overlaid with fine-scale air temperature observations. The resulting output identified the distribution of population vulnerability and exposure. This assessment of vulnerability, combining exposure and sensitivity components, can provide precedent for efficient, targeted action to be taken to reduce the impact of heat waves at present and under climate change.