Trends in atmospheric ammonium concentrations in relation to atmospheric sulfate and local agriculture

Ammonium (NH(4)(+)) concentrations in air and precipitation at the Institute of Ecosystem Studies (IES) in southeastern New York, USA declined over an 11-year period from 1988 to 1999, but increased from 1999 to 2001. These trends in particulate NH(4)(+) correlated well with trends in particulate SO(4)(2-) over the 1988-2001 period. The NH(4)(+) trends were not as well correlated with local cattle and milk production, which declined continuously throughout the period. This suggests that regional transport of SO(4)(2-) may have a greater impact on concentrations of NH(4)(+) and subsequent deposition than local agricultural emissions of NH(3). Ammonium concentrations in precipitation correlated significantly with precipitation SO(4)(2-) concentrations for the 1984-2001 period although NH(4)(+) in precipitation increased after 1999 and SO(4)(2-) in precipitation continued to decline after 1999. The correlation between NH(4)(+) and SO(4)(2-) was stronger for particulates than for precipitation. Particulate NH(4)(+) concentrations were also correlated with particulate SO(4)(2-) concentrations at 31 of 35 eastern U.S. CASTNet sites that had at least 10 years of data. Air concentrations of NH(4)(+) and SO(4)(2-) were more strongly correlated at the sites that were located within an agricultural landscape than in forested sites. At most of the sites there was either no trend or a decrease in NH(4)(+) dry deposition during the 1988-2001 period. The sites that showed an increasing trend in NH(4)(+) dry deposition were generally located in the southeastern U.S. The results of this study suggest that, in the northeastern U.S., air concentrations of NH(4)(+) and subsequent deposition may be more closely linked to SO(4)(2-) and thus SO(2) emissions than with NH(3) emissions. These results also suggest that reductions in S emissions have reduced NH(4)(+) transport to and NH(4)(+)-N deposition in the Northeast.     

Three decades of on-road mobile source emissions reductions in South Los Angeles

In May 2018, the University of Denver repeated on-road optical remote sensing measurements at two locations in Lynwood, CA. Lynwood area vehicle tailpipe emissions were first surveyed in 1989 and 1991 because the area suffered from a large number of carbon monoxide (CO) air quality violations. These new measurements allow for the estimation of fuel-specific CO and total hydrocarbon (HC) emissions reductions, changes in the longevity of emission-control components, and the prevalence of high emitters in the current fleet. Since 1989 CO emissions decreased approximately factors of 10 (120 ± 8 to 12.3 ± 0.2 gCO/kg of fuel) and 20 (210 ± 8 to 10.4 ± 0.4 gCO/kg of fuel) at our I-710/Imperial Highway and Long Beach Blvd. sites, respectively. These reductions are also reflected in the local ambient air measurements. Tailpipe HC emissions have decreased by a factor of 25 (50 ± 4 to 2.1 ± 0.3 gHC/kg of fuel) since 1991 at the Long Beach Blvd. location. The decreases are so dramatic that the vast majority of vehicles now have HC measurements that are indistinguishable from zero. The decreases have increased the skewedness of the emissions distribution with the 99th percentile now responsible for more than 37% (CO) and 28% (HC) of the totals. Ammonia emissions collected in 2018 at both Lynwood locations peak with 20-year-old vehicles (1998 models), indicating long lifetimes for catalytic converters.

In 1989 and 1991, the on-road Lynwood fleets had significantly higher emissions than fleets observed in other locations within the South Coast Air Basin. The 2018 fleets now have means and emissions by model year that are consistent with those observed at other sites in Los Angeles and the U.S. This indicates that modern vehicle combustion management and after-treatment systems are achieving their goals regardless of community income levels.

Implications: Recent on-road vehicle emission measurements at two locations in the Lynwood, CA area, first visited in 1989, found significant fuel specific CO and HC emission reductions. CO emissions have decreased by a factor of 10 and 20 at each location and HC emissions have declined by a factor of 25. This has increased the skewedness in both species emissions distribution. The 2018 fleets have means and emissions by model year that are now consistent with those observed at other U.S. sites indicating that modern vehicle emissions control advancements are achieving their goals regardless of community income levels.     

Rejection of emerging organic micropollutants in nanofiltration-reverse osmosis membrane applications.

The rejection of emerging trace organics by a variety of commercial reverse osmosis (RO), nanofiltration (NF), and ultra-low-pressure RO (ULPRO) membranes was investigated using TFC-HR, NF-90, NF-200, TFC-SR2, and XLE spiral membrane elements (Koch Membrane Systems, Wilmington, Massachusetts) to simulate operational conditions for drinking-water treatment and wastewater reclamation. In general, the presence of effluent organic matter (EfOM) improved the rejection of ionic organics by tight NF and RO membranes, as compared to a type-II water matrix (adjusted by ionic strength and hardness), likely as a result of a decreased negatively charged membrane surface. Rejection of ionic pharmaceutical residues and pesticides exceeded 95% by NF-90, XLE, and TFC-HR membranes and was above 89% for the NF-200 membrane. Hydrophobic nonionic compounds, such as bromoform and chloroform, exhibited a high initial rejection, as a result of both hydrophobic-hydrophobic solute-membrane interactions and steric exclusion, but rejection decreased significantly after 10 hours of operation because of partitioning of solutes through the membranes. This resulted in a partial removal of disinfection byproducts by the RO membrane TFC-HR. In a type-II water matrix, the effect of increasing feed water recoveries on rejection of hydrophilic ionic and nonionic compounds was compound-dependent and not consistent for different membranes. The presence of EfOM, however, could neutralize the effect of hydrodynamic operating condition on rejection performance. The ULPRO and tight NF membranes were operated at lower feed pressure, as compared to the TFC-HR, and provided a product water quality similar to a conventional RO membrane, regarding trace organics of interest.     

Relationship between the ATP content of subsurface material and the rate of biodegradation of alkylbenzenes and chlorobenzene

The rate of biotransformation of toluene in unconsolidated subsurface material from sites at Lula, Oklahoma, and Conroe, Texas, was compared to the ATP (adenosine triphosphate) content of these materials. The rate of toluene degradation decreased with decreasing ATP content. When ATP contents were at or less than 0.05 ng g⁻¹, biotransformation of toluene could not be detected (less than 1% of the initial concentration was degraded per week). At intermediate concentrations of ATP, 0.37 and 0.16 ngvg⁻¹, the rates of toluene degradation were 18 ± 4.5% and 25 ± 10% of the initial concentration per week. At ATP concentrations above 1 ng g⁻¹, the rates of toluene degradation exceeded 90% of the initial concentration per week. There was no simple relationship between ATP content and chlorobenzene degradation. Subsurface material that had been exposed to creosote wastes, and which degraded toluene rapidly, also degraded benzene, o-xylene, and m-xylene.     

Field method comparison between passive air samplers and continuous monitors for Vocs and NO2 in El Paso, Texas

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO2) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO2 and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (< 5% relative standard deviation, RSD) were found for NO2 measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (> or = 77% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO2 samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs. However, except for toluene, OVM BTEX measurements generally exceeded their continuous counterparts with a mean bias of 5-10%. Although interpretation of the study results was limited due to small sample sizes, diffusion barrier influences caused by shelters that housed OVMs and differences in sampling heights between OVMs and auto-GC inlet may explain the overestimation.     

The effects of light and thallus scour from<Emphasis Type="Italic"> Ecklonia radiata</Emphasis> canopy on an associated foliose algal assemblage: the importance of photoacclimation

Kelp canopies have long been recognised for their influence on the structure of algal assemblages on sublittoral reefs. In Marmion Lagoon, Western Australia, we investigated how a canopy of the small kelp Ecklonia radiata affected the associated foliose algal assemblage and what potential mechanisms were responsible for the effects we observed. Light levels and physical abrasion (thallus scour) by an E. radiata canopy were manipulated in an orthogonal fixed-factor experiment that revealed that changes in light, but not thallus scour, had a significant effect on the composition of the algal assemblage. Reduced light levels were associated with a decrease in the Shannon-Wiener diversity index and an increased dominance of the foliose algae Pterocladia lucida and Rhodymenia sonderi. Photobiological investigations of three foliose species, P. lucida, R. sonderi and Chauviniella coriifolia indicated that they were able to photoacclimate to low light levels by increasing thallus absorption by up to 11%. Photoacclimation was also evident by an increase in the maximum rate of electron transport under low-light conditions. We conclude that the E. radiata canopy in Marmion Lagoon structures the foliose algal assemblage through the modification of the light environment and that this effect may be mediated by differences in the ability of different species of foliose algae to photoacclimate.Communicated by M.S. Johnson, Crawley     

Protection from fishing alters the species composition of fish assemblages in a temperate-tropical transition zone

Closure of areas to fishing is expected to result in an increase in the abundance of targeted species; however, changes to populations of species not targeted by fishermen will depend upon their role in the ecosystem and their relationship with targeted species. The effects of protection on targeted and non-targeted reef fish species at the Houtman Abrolhos Islands, Western Australia were studied using baited remote underwater stereo–video cameras. Video images were collected from shallow (8–12 m) and deep (22–26 m) reef sites inside a Marine Protected Area (MPA) at each of three island groups and from three replicate fished locations at each of these groups that span a temperate-tropical transition area. The MPAs were established in 1994 and vary in size from 13.72 km² at the Pelsaert group in the south to 22.29 km² at the Easter group to 27.44 km² at the Wallabi group in the north. The relative abundances of 137 fish species from 42 families were recorded. Large differences in fish assemblage structure existed between MPA and fished locations, and also between shallow and deep regions. Targeted fish species Plectropomus leopardus, Lethrinus miniatus, Lethrinus nebulosus, Pagrus auratus and Glaucosoma hebraicum were more abundant inside MPAs than in areas open to fishing. Their abundance inside MPAs was between 1.13 and 8 times greater than their abundance at fished locations. For non-targeted fish species many were more abundant in areas open to fishing, e.g. Coris auricularis, Thalassoma lutescens, Thalassoma lunare, Dascyllus trimaculatus, however others were conversely more abundant inside MPAs, e.g. Gymnothorax spp, Kyphosus sydneyanus, Scarus microhinos, Chromis westaustralis, Chaetodon spp. This study demonstrates that the removal of abundant targeted species from an ecosystem by fishing can indirectly impact non-fished species and alter the trophic structure of fish assemblages. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Comparison of Evapotranspiration Simulation Performance by APEX Model in Dryland and Irrigated Cropping Systems

Accurate estimation of evapotranspiration (ET) is essential to improve water use efficiency of crop production systems managed under different water regimes. The Agricultural Policy/Environmental eXtender (APEX) model was used to simulate ET using four potential ET (ET_p) methods. The objectives were to determine sensitive ET parameters in dryland and irrigated cropping systems and compare ET simulation in the two systems using multiple performance criteria. Measured ET and crop yield data from lysimeter fields located in the United States Department of Agriculture‐Agricultural Research Service Bushland, Texas were used for evaluation. The number of sensitive parameters was higher for dryland (11–14) than irrigated cropping systems (6–8). Only four input parameters: soil evaporation plant cover factor, root growth soil strength, maximum rain intercept, and rain intercept coefficient were sensitive in both cropping systems. Overall, it is possible to find a set of robust parameter values to simulate ET accurately in APEX in both cropping systems using any ET_p method. However, more computation time is required for dryland than irrigated cropping system due to a relatively larger number of sensitive input parameters. When all inputs are available, the Penman–Monteith method takes the shortest computation time to obtain one model run with robust parameter values in both cropping systems. However, in areas with limited datasets, one can still obtain reasonable ET simulations using either Priestley–Taylor or Hargreaves. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Potential for enhanced phytoremediation of landfills using biosolids – a review

Despite the use of recyclable materials increasing worldwide, waste disposal to landfill remains the most common method of waste management because it is simple and relatively inexpensive. Although landfill disposal is an effective waste management system, if not managed correctly, a number of potential detrimental environmental impacts have been identified including soil and ground water contamination, leachate generation, and gas emissions. In particular, improper post-closure treatment of landfills or deterioration of the conventional clay landfill capping were shown to result in land degradation which required remediation to secure contaminants within the landfill site.Phytoremediation is an attractive technology for landfill remediation, as it can stabilize soil and simultaneously remediate landfill leachate. In addition, landfill phytoremediation systems can potentially be combined with landfill covers (Phytocapping) for hydrological control of infiltrated rainfall. However, for the successful application of any phytoremediation system, the effective establishment of appropriate, desired vegetation is critical. This is because the typically harsh and sterile nature of landfill capping soil limits the sustainable establishment of vegetation. Therefore, the physicochemical properties of landfill capping soils often need to be improved by incorporating soil amendments. Biosolids are a common soil amendment and will often meet these demanding conditions because they contain a variety of plant nutrients such as nitrogen, phosphate, potassium, as well as a large proportion of organic matter. Such amendment will also ameliorate the physical properties of the capping soils by increasing porosity, moisture content, and soil aggregation. Contaminants which potentially originate from biosolids will also be remediated by activities congruent with the establishment of plants and bacteria.