Utilization of Natural Oils for Decomposition of Polyurethanes

The model polyurethane foam and model compact polyurethane material were prepared and then decomposed by means of natural oils. Castor oil and fish oil based polyol were used in this study. Optimal conditions for the polyurethane decomposition were found. Temperature 250 °C was necessary for efficient polyurethane decomposition by castor oil whereas 200 °C is sufficient in the case of fish oil based polyol. Prepared products have hydroxyl number in the range of 95–168 mg KOH g⁻¹. During the polyurethane decomposition no cleavage of double bonds in the fatty acid chains of castor oil and fish oil based polyol was observed.     

Dancing to different tunes: heterospecific deciphering of the honeybee waggle dance

Although the structure of the dance language is very similar among species of honeybees, communication of the distance component of the message varies both intraspecifically and interspecifically. However, it is not known whether different honeybee species would attend interspecific waggle dances and, if so, whether they can decipher such dances. Using mixed-species colonies of Apis cerana and Apis mellifera, we show that, despite internal differences in the structure of the waggle dances of foragers, both species attend, and act on the information encoded in each other’s waggle dances but with limited accuracy. These observations indicate that direction and distance communication pre-date speciation in honeybees.     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

Chitosan/Hydrophilic Plasticizer-Based Films: Preparation,Physicochemical and Antimicrobial Properties

The addition of plasticizers to biopolymer films is a good method for improving their physicochemical properties. The aim of this study was to evaluate the effect of chitosan (CHI) blended with two hydrophilic plasticizers glycerol (GLY) and sorbitol (SOR), at two concentrations (20 and 40 wt%) on their mechanical, thermal, barrier, structural, morphological and antimicrobial properties. The chitosan was prepared through the alkaline deacetylation of chitin obtained from fermented lactic from shrimp heads. The obtained chitosan had a degree of deacetylation (DA) of 84 ± 2.7 and a molecular weight of 136 kDa, which indicated that a good film had formed. The films composed of CHI and GLY (20 wt%) exhibited the best mechanical properties compared to the neat chitosan film. The percentage of elongation at break increase to over 700 % in the films that contained 40 % GLY, and these films also exhibited the highest values for the water vapor transmission rate (WVTR) of 79.6 ± 1.9 g m² h^?1 and a yellow color (b _o  = 17.9 ± 2.0) compared to the neat chitosan films (b _o  = 8.8 ± 0.8). For the structural properties, the Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analyses revealed an interaction in the acetamide group and changes in the crystallinity of plasticized films. The scanning electron micrographs revealed that all formulations of the chitosan films were smooth, and that they did not contain aggregations, pores or microphase separation. The thermal analysis using differential scanning calorimetry (DSC) revealed a glass transition temperature (Tg) of 130 °C for neat chitosan film, but the addition of SOR or GLY elicited a decrease in the temperature of the peak (120 °C). In addition, the antimicrobial activity of the chitosan films was evaluated against Listeria monocytogenes, and reached a reduction of 2 log after 24 h. The plasticizer concentration of 20 % GLY is sufficient for obtaining flexible chitosan films with good mechanical properties, and it could serve as an alternative as a packaging material to reduce environmental problems associated with synthetic packaging films.     

Phytoremediation of a Petroleum‐Hydrocarbon Contaminated Shallow Aquifer in Elizabeth City,North Carolina,USA

A former bulk fuel terminal in North Carolina is a groundwater phytoremediation demonstration site where 3,250 hybrid poplars, willows, and pine trees were planted from 2006 to 2008 over approximately 579,000 L of residual gasoline, diesel, and jet fuel. Since 2011, the groundwater altitude is lower in the area with trees than outside the planted area. Soil‐gas analyses showed a 95 percent mass loss for total petroleum hydrocarbons (TPH) and a 99 percent mass loss for benzene, toluene, ethylbenzene, and xylenes (BTEX). BTEX and methyl tert‐butyl ether concentrations have decreased in groundwater. Interpolations of free‐phase, fuel product gauging data show reduced thicknesses across the site and pooling of fuel product where poplar biomass is greatest. Isolated clusters of tree mortalities have persisted in areas with high TPH and BTEX mass. Toxicity assays showed impaired water use for willows and poplars exposed to the site's fuel product, but Populus survival was higher than the willows or pines on‐site, even in a noncontaminated control area. All four Populus clones survived well at the site. © 2014 Wiley Periodicals, Inc.*     

Policy implementation of the Republic Act (RA) No. 9003 in the Philippines: A case study of Cebu city

Municipal Solid Waste Management (MSWM) is considered to be one of the most serious environmental issues in the Philippines. The annual waste generation was estimated at 10.6 million tonnes in 2012 and this is expected to double in 2025. The Republic Act (RA) No. 9003, widely known as the Ecological Solid Waste Management Act of 2000, provides the required policy framework, institutional mechanisms and mandate to the Local Government Units (LGUs) to achieve 25% waste reduction target through establishing an integrated solid waste management plan based on the 3Rs (reduce, reuse and recycling). Although the initial impact of the LGUs is still very limited in implementing the national mandate, this article highlights the successful experiences of Cebu, the second largest city in the Philippines, in reducing its MSW generation by more than 30% in the past three years. This study also explores the implementation process, innovative actions taken by the Cebu City Government in implementing the national mandate at local level and identifies the factors that influence the policy implementation. The findings suggest that the impacts of the national mandate can be achieved if the LGUs have the high degree of political commitment, planning and development of effective local strategies in a collaborative manner to meet with local conditions, partnership building with other stakeholders, capacity development, adequate financing and incentives, and in the close monitoring and evaluation of performance.     

PLANNING FOR THE REHABILITATION OF GRAVEL PITS1

ABSTRACT: By field investigations and planning, it is profitable to rehabilitate gravel pits as recreational lakes in urban areas. Some of the important aspects to be considered are topography, soil, surface water and groundwater. A case study is presented and some general guidelines in the rehabilitation process are given. This kind of a use for derelict land is important at the present time as there is a growing demand for recreational lakes in urban areas.     

ADAPTATION TO ARIDITY: WATER DEVELOPMENT IN SOUTH AFRICA1

ABSTRACT The Republic of South Africa, legatee of a three-century history of recurring drought, is firmly committed to a program of the optimum use of its water for the national benefit. Its water law encourages centralized planning in that water is held to be the property of the state and is assignable without requiring acquiescence by the basin or province of origin. Interbasin diversions from the Tugela River to the Vaal River Basin, from the Orange River to the Fish and Sundays River Basins, and from several basins to Cape Town are under construction as are facilities for water importation from Lesotho and Angola. For satisfaction of demands beyond the year 2000 the nation may depend increasingly on a shift of its power production and water-using industry from the coal fields of the central plateau to nuclear power development with associated desalination along its coasts. Alternatively, and preferably, it may cooperate in a co-prosperity bloc in Southern Africa aiding the economies of its neighbors by development for mutual advantage of the water and power resources of the Okavango and other northern rivers.     

Natural structure in the man-made environment

Summary The paper contains examples of design elements and natural symmetries that have appeared and are now being used in man-made works. The pleasing principles of symmetric structures have been shown in examples of architectural ornament, planning of towns and university campuses. These same symmetries are shown to give coherence to the growth of forms in nature. The paper further discusses how different artists have arrived at their particular choices of natural symmetries to be used whether in planning, architectural structures, town clusters or painting. Dr Arthur L. Loeb was born in The Netherlands and was educated at the University of Pennsylvania and Harvard University, where he took a doctorate in Chemical Physics. Through his research contact with Gyorgy Kepes, M. C. Escher and R. Buckminster Fuller, he has been able to embrace the whole spectrum of design. He is a sculptor and painter, and has great interest in music. His 40 or so publications show his expertize as well as his exceptional ability in combining the compatible aspects of the arts and the sciences. His present position is Head Tutor at the Department of Visual and Environmental Studies, and Curator of the Teaching Collection in the Carpenter Center, Harvard University.