Modeling depth filtration of activated sludge effluent using a compressible medium filter.

A new filter, using a compressible-filter medium, has been evaluated for the filtration of secondary effluent. The ability to adjust the properties of the filter medium by altering the degree of the medium compression is a significant departure from conventional depth-filtration technology. Unlike conventional filters, it is possible to optimize the performance of the compressible-medium filter (CMF) by adjusting the medium properties (i.e., collector size, porosity, and depth) to respond to the variations in influent quality. Because existing filter models cannot be used to predict the performance of the CMF, a new predictive model has been developed to describe the filtration performance of the CMF and the effect of medium-compression ratio. The model accounts for the fact that the properties of the filter medium change with time and depth. The model, developed for heterodisperse suspensions and variable influent total suspended solids concentrations, can be used to predict all possible phases of filtration (i.e., ripening, constant removal, and breakthrough). A hyperbolic-type, second-order, nonlinear, partial-differential equation was derived to model the CMF. The equation was solved using the finite-difference numerical method. The accuracy of the numerical method was tested by a sensitivity analysis and a convergence test. The model is first-order accurate with respect to medium depth and time. Field data were obtained for the filtration of settled secondary effluent using a CMF with a capacity of 1200 m3/d. Model predictions were compared with observed performance from filter runs conducted at medium-compression ratios between 15 and 40% and filtration rates from 410 to 820 L/m2 min. The difference between the observed and the predicted values was found to be within 0 to 15%.     

The Southeastern Aerosol Research and Characterization Study: part 1--Overview

This paper presents an overview of a major, long-term program for tropospheric gas and aerosol research in the southeastern United States. Building on three existing ozone (O3)-focused research sites begun in mid-1992, the Southeastern Aerosol Research and Characterization Study (SEARCH) was initiated in mid-1998 as a 7-year observation and research program with a broader focus including aerosols and an expanded geographical coverage in the Southeast. The monitoring network comprises four urban-rural (or urban-suburban) site pairs at locations along the coast of the Gulf of Mexico and inland, including two moderately sized and two major urban areas (Pensacola, FL; Gulfport, MS; Atlanta, GA; and Birmingham, AL). The sites are equipped with an extensive suite of instruments for measuring particulate matter (PM), gases relevant to secondary O3 and the production of secondary aerosol particles, and surface meteorology. The measurements taken to date have added substantially to the knowledge about the temporal behavior and geographic variability of tropospheric aerosols in the Southeast. Details are presented in four papers to follow.     

Comparative assessment of municipal wastewater disposal methods in southeast Florida.

A comparative assessment of the risks of three effluent disposal alternatives currently available to wastewater utilities in Southeast Florida is presented in this paper. The alternatives are: deep well injection and ocean outfalls following secondary treatment, and surface water (canal) discharges following secondary wastewater treatment, filtration and nutrient removal. Water quality data, relative to disposal of wastewater treatment plant effluent were gathered, along with water quality data on the receiving waters, from utilities. Comparisons and conclusions regarding potential health concerns associated with the three disposal alternatives are presented. The results indicated that health risks associated with deep wells were generally lower than those of the other two alternatives. The proximity of injection wells to aquifer storage and recovery wells was a determining factor relative to injection well risk. Urban ecological risks were also indicated to be lower, though impacts of urban water use/reuse to the Everglades were not studied. Additional data collection and analysis were recommended to understand the effects of wastewater management on the cycling of water, nutrients and other constituents on southeast Florida. In particular, it was recommended that monitoring of effluents for nitrosamines and pharmaceutically active substances be implemented on a broad scale.     

The midlatitude North American background aerosol and global aerosol variation

Protocols for the particulate matter (PM) National Ambient Air Quality Standards (NAAQS), and the Regional Haze Rule (RHR) give two complementary definitions for "natural" background airborne particle concentrations in the United States. The definition for the NAAQS derives largely from reported annual averages, whereas the definition for the RHR takes into account the frequency of occurrence of a range of visibility conditions estimated using fine particle composition. These definitions are simple, static representations of background or "unmanageable" aerosol conditions in the United States. An accumulation of data from rural-remote sites representing global conditions indicates that the airborne particle concentrations are highly variable. Observational campaigns show weather-related variations, including incidents of regional or intercontinental transport of pollution that influence background aerosol levels over midlatitude North America. Defining a background in North America based on long-term observations relies mainly on the remote-rural IMPROVE network in the United States, with a few additional measurements from Canada. Examination of the frequency of occurrence of mass concentrations and particle components provides insight not only about annual median conditions but also the variability of apparent background conditions. The results of this analysis suggest that a more elaborate approach to defining an unmanageable background could improve the present approach taken for information input into the U.S. regulatory process. An approach interpreting the continental gradients in fine PM (PM2.5) concentrations and composition may be warranted.     

Multiple regression models: a methodology for evaluating trihalomethane concentrations in drinking water from raw water characteristics

The presence of trihalomethanes (THMs) in drinking water has attracted the attention of both researchers and professionals, because of the harmful effects of these substances on human health. A multiple regression model was developed to estimate THM concentrations in finished drinking water, using data from the Menidi Treatment Plant of Athens. A number of routinely measured characteristics--including chlorine dose, chlorophyll a, temperature, pH and bromide--of raw water, were used to generate a reliable methodology for predicting both total THM and individual species concentrations. Seasonality effects were also considered during the analysis. In general, these models were found to give acceptable fits, estimating accurately lows and highs over the annual cycle.     

Kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE)

The kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE) in aqueous solutions at various pH, temperature, oxidant concentration and ionic strength levels was studied. The MTBE degradation was found to follow a pseudo-first-order decay model. The pseudo-first-order rate constants of MTBE degradation by persulfate (31.5 mM) at pH 7.0 and ionic strength 0.11 M are approximately 0.13 x 10(-4), 0.48 x 10(-4), 2.4 x 10(-4) and 5.8 x 10(-4) S(-1) at 20, 30, 40 and 50 degrees C, respectively. Under the above reaction conditions, the reaction has an activation energy of 24.5 +/- 1.6 kcal/ mol and is influenced by temperature, oxidant concentration, pH and ionic strength. Raising the reaction temperature and persulfate concentration may significantly accelerate the MTBE degradation. However, increasing both pH (over the range of 2.5-11) and ionic strength (over the range of 0.11-0.53 M) will decrease the reaction rate. Reaction intermediates including tert-butyl formate, tert-butyl alcohol, acetone and methyl acetate were observed. These intermediate compounds were also degraded by persulfate under the experimental conditions. Additionally, MTBE degradation by persulfate in a groundwater was much slower than in phosphate-buffer solutions, most likely due to the presence of bicarbonate ions (radical scavengers) in the groundwater.     

Development and demonstration of an explicit lumped-parameter biofilter model and design equation incorporating monod kinetics

Biofiltration is an economical air pollution control (APC) technology, particularly suitable for the treatment of air-streams having high flow rates and low concentrations of volatile organic compounds (VOCs). This technology utilizes enzymatic catalysis at ambient conditions to mineralize such pollutants to CO2, H2O, and salts. A pilot-scale study conducted for more than 4 years investigated the development of a new biofiltration technology employing trickle bed air biofilters (TBABs). Following the completion of this experimental study, additional data analysis was performed to develop a simple lumped-parameter biofilter model, assuming first-order kinetics. This model related the observed biofilter performance to the principle independent physical, thermodynamic, and biochemical parameters. The initial model has subsequently been expanded to incorporate Monod kinetics. In this paper, the development and use of the final explicit lumped-parameter biofilter model and design equation, incorporating Monod kinetics, are presented. To facilitate the application of this model, practical procedures are also presented for the determination of VOC solubility, VOC biokinetic Monod parameters, and the maximum practical biofilter inlet VOC concentration.     

Ozone patterns for three metropolitan statistical areas in North Carolina, USA

As part of an effort by the state of North Carolina to develop a State Implementation Plan (SIP) for 1-h peak ozone control, a network of ozone stations was established to monitor surface ozone concentrations across the state. Between 19 and 23 ozone stations made continuous surface measurements between 1993 and 1995 surrounding three major metropolitan statistical areas (MSAs): Raleigh/Durham (RDU), Charlotte/Mecklenburg (CLT), and Greensboro/High Point/Winston-Salem (GSO). Statistical averages of the meteorological and ozone data were performed at each Metropolitan Statistical Area (MSA) to study trends and/or relationships on high ozone days (days in which one of the MSA sites measured an hourly ozone concentration90.0 ppbv). County emission maps of precursor gases, wind roses, total area averages of ozone, total downwind averages of ozone deviations, upwind averages of ozone, and a modified delta ozone analysis were all obtained and analyzed. The results of this study show a reduction in the delta ozone relative to an earlier study at RDU, but no average significant change at CLT (no comparison can be made for GSO). The statistical data analyses in this study are used to quantify the importance of local contributions and regional transport, to ozone air pollution in the MSAs.     

Natural products: seasonal variation in trichome counts and contents in Lycopersicum hirsutum f. glabratum

Wild tomato leaves possess a pest-resistance mechanism in their glandular trichomes and the exudates they produce. Type IV and VI glandular trichomes on the leaves of five wild tomato accessions of Lycopersicum hirsutum f. glabratum (PI 126449, PI 134417, PI 134418, PI 251304, and LA 407) grown under greenhouse conditions were counted. Major chemical compounds from glandular leaf trichomes of the accessions tested were extracted, purified, and quantified at different periods during the growing seasons by gas chromatography (GC) and mass spectrometry (GC/MS). The toxicity of two methylketones (2-undecanone and 2-tridecanone), the major constituents of the accessions tested, to adults of the sweetpotato whitefly, Bemisia tabaci (Gennadius) and fourth instar larvae of the Colorado potato beetle (CPB), Leptinotarsa decemlineata (Say), was determined using no-choice bioassays. 2-undecanone caused 80% mortality of the fourth instar larvae of the CPB at the highest concentration tested (100 mg 2-undecanone mL(-1) of acetone) while 2-tridecanone caused 72% mortality of whiteflies at 20 mg 2-tridecanone mL(-1) of 65% ethanol. The concentration of 2-undecanone and 2-tridecanone on the leaves of each of the five accessions of L. hirsutum f. glabratum and the mass spectra of 2-undecanone and 2-tridecanone are presented. Overall, the concentration of 2-undecanone on the leaves was significantly higher than 2-tridecanone. Concentration of the two methylketones varied among accessions and sampling season. Plants produced the highest concentration of 2-undecanone during the month of August. On average, each plant of accession PI 251304 provided 354 g fresh leaves (averaging about 52,353 cm2 exposed leaf surface area) and produced 32.5 and 8.7 mg of 2-undecanone and 2-tridecanone, respectively. L. hirsutum f. glabratum accessions may become a valuable source of natural products, which could minimize reliance on synthetic pesticides.