Assessment of organochlorine pesticide residues in Indian flue-cured tobacco with gas chromatography-single quadrupole mass spectrometer

Presence of pesticide residues in tobacco increases health risk of both active and passive smokers, apart from the imminent potential health problems associated with it. Thus, monitoring of pesticide residue is an important issue in terms of formulating stringent policies, enabling global trade and safeguarding the consumer’s safety. In this study, a gas chromatography-single quadrupole mass spectrometry (GC-MS) method based upon quantifier-qualifier ions (m/z) ratio was employed for detecting and assessing ten organochlorine pesticide residues (α-HCH, β-HCH, γ-HCH, δ-HCH, 2,4-DDT, 4,4-DDT, endrin, α-endosulfan, β-endosulfan and endosulfan sulphate) in 152 flue-cured (FC) tobacco leave samples from two major tobacco growing states, Karnataka and Andhra Pradesh, of India. In the majority of samples, pesticide residue levels were below the limit of quantification (LOQ). In few samples, pesticide residues were detected and they found to comply with the guidance residue levels (GRL) specifications of the Cooperation Center for Scientific Research Relative to Tobacco (CORESTA). Detection of the phase out pesticides like DDT/HCH might be due to transfer of persistent residues from the environmental components to the plant. This is the first report on these ten organochlorine pesticide residues in Indian FC tobacco.     

Diversity of soil fungi in North 24 Parganas and their antagonistic potential against Leucinodes orbonalis Guen. (Shoot and fruit borer of brinjal)

Soil samples were collected from agricultural fields and gardens in North 24 Parganas, West Bengal, and fungi species were isolated from them. Thirty-one fungal species were isolated with 19 found in agricultural soil and 28 in garden soil. Twenty-eight out of 31 were identified using cultural and microscopic characters, and three were unidentified. The diversity of isolated fungi was calculated by Simpson’s diversity index. The garden soil possessed more fungal colonies (750) than agricultural soil (477). In agricultural soil, the dominant fungi were Aspergillus niger, Rhizopus oryzae, and Penicillium expansum, and the dominant fungi of garden soil were A. niger and Fusarium moniliforme. Simpson’s diversity index indicated that garden soil had more fungal diversity (0.939) than agricultural soil (0.896). The entomopathogenic capacity of the isolated fungi was tested against the brinjal shoot and fruit borer (Leucinodes orbonalis Guen) which is the major insect pest of brinjal. The isolated fungi were screened against larva of L. orbonalis for their entomopathogenic potential. Beauveria bassiana, A. niger, and P. expansum showed appreciable antagonism to L. orbonalis, and their lethal doses with 50 % mortality (LD₅₀s) were 4.0?×?10⁷, 9.06?×?10⁷, and 1.50?×?10⁸ spore/mL, respectively, and their times taken to reach 50 % mortality (LT₅₀s) were 9.77, 10.56, and 10.60 days, respectively. This work suggests the restriction of chemical pesticide application in agricultural fields to increase fungal diversity. The entomopathogenic efficacy of B. bassiana could be used in agricultural fields to increase fugal diversity and protect the brinjal crop.     

Monitoring variation in greenhouse gases concentration in Urban Environment of Delhi

Cities across the globe are considered as major anthropogenic sources of greenhouse gases (GHG), yet very few efforts has been made to monitor ambient concentration of GHG in cities, especially in a developing country like India. Here, variations in the ambient concentrations of carbon dioxide (CO₂) and methane (CH₄) in residential, commercial, and industrial areas of Delhi are determined from fortnightly daytime observations from July, 2008 to March, 2009. Results indicate that the average daytime ambient concentration of CO₂ varied from 495 to 554 ppm in authorized residential areas, 503 to 621 ppm in the slums or jhuggies in the unauthorized residential areas, 489 to 582 ppm in commercial areas, and 512 to 568 ppm in industrial areas with an average of 541?±?27 ppm. CH₄ concentration varied from 652 to 5,356 ppbv in authorized residential areas, 500 to15,220 ppbv in the unauthorized residential areas, 921 to 11,000 ppbv in the commercial areas, and 250 to 2,550 ppbv in the industrial areas with an average of 3,226?±?1,090 ppbv. A low mid-afternoon CO₂ concentration was observed at most of the sites, primarily due to strong biospheric photosynthesis coupled with strong vertical mixing.     

Relationship of methyl mercury accumulation with lipid and weight in two river cat fish species, Wallagoo attu and Mystus aor, from West Bengal, India

This study focuses on mercury (Hg) bioaccumulation in Indian cat fish, Wallagoo attu and Mystus aor, from different rivers. Methyl mercury (MeHg) concentrations were determined in muscle tissue of two different parts, ventral and dorsal part, of each species and the levels of organic mercury were co-related with lipid content of each part. The MeHg concentrations increased in a linear fashion with both weight and age for these river species. The average concentration of MeHg was found to be 0.93?±?0.60 and 1.26?±?0.62 μg Hg g^?1 (expressed in wet weight basis) for ventral and dorsal parts, respectively in W. attu and this was above the 0.25 μg Hg g^?1 of wet weight, the limit set by the Prevention of Food Adulteration Act for the maximum level for consumption of fish exposed to mercury pollution. In M. Aor the concentration of MeHg was not above the standard limit but threatening, it was 0.22?±?0.07 and 0.23?±?0.08 μg Hg g^?1 (expressed in wet weight basis) in dorsal and ventral parts, respectively.     

Metal concentrations in water, sediment, and fish from sewage-fed aquaculture ponds of Kolkata, India

The concentrations of lead, cadmium, chromium, copper, and zinc were investigated in the sewage-fed pond water, sediment, and the various organs of Labeo rohita, Catla catla, Cirrhinus mrigala, Oreochromis mossambicus, and Cyprinus carpio cultured in sewage-fed ponds, Kolkata, India. Among the metals, cadmium, lead, and zinc were detected in water and, except lead, were below the water quality guideline levels for the protection of freshwater aquatic life proposed by CEQG (Canadian Environmental Quality Guidelines) and AENV (Alberta Environment). Therefore, lead could pose danger to aquatic organisms. All the five metals were detected in the sediment and, except cadmium and lead, were below the sediment quality guideline levels for aquatic life proposed by EPA (Environmental Protection Agency). Therefore, these two metals could be toxic to aquatic organisms. Significant (P > 0.05) differences were observed among the five fish species for all these metals accumulation. Also, significant (P > 0.05) differences were noticed among these metals accumulation in fish organs. Cadmium showed the least bioaccumulation, while zinc showed the highest bioaccumulation in all the fish species. Though the metal concentration in the different fish tissues was variable, the highest concentration was found in kidney and the lowest in the muscle. Concentrations of these metals in the muscle tissue of all the fish species were well below the consumption safety tolerance in fish set by WHO/FAO, and thus, so far as these metals are concerned, these sewage-fed cultured fishes are safe and suitable for human consumption.     

Using a relative health indicator (RHI) metric to estimate health risk reductions in drinking water

When a new drinking water regulation is being developed, the USEPA conducts a health risk reduction and cost analysis to, in part, estimate quantifiable and non-quantifiable cost and benefits of the various regulatory alternatives. Numerous methodologies are available for cumulative risk assessment ranging from primarily qualitative to primarily quantitative. This research developed a summary metric of relative cumulative health impacts resulting from drinking water, the relative health indicator (RHI). An intermediate level of quantification and modeling was chosen, one which retains the concept of an aggregated metric of public health impact and hence allows for comparisons to be made across “cups of water,” but avoids the need for development and use of complex models that are beyond the existing state of the science. Using the USEPA Six-Year Review data and available national occurrence surveys of drinking water contaminants, the metric is used to test risk reduction as it pertains to the implementation of the arsenic and uranium maximum contaminant levels and quantify “meaningful” risk reduction. Uranium represented the threshold risk reduction against which national non-compliance risk reduction was compared for arsenic, nitrate, and radium. Arsenic non-compliance is most significant and efforts focused on bringing those non-compliant utilities into compliance with the 10 μg/L maximum contaminant level would meet the threshold for meaningful risk reduction.     

Laccase-catalyzed removal of 2,4-dimethylphenol from synthetic wastewater: effect of polyethylene glycol and dissolved oxygen

The potential use of laccase (SP-504) in an advanced oxidation-based treatment technology to remove 2,4-dimethylphenol (DMP) from water was investigated with and without the additive, polyethylene glycol (PEG). The DMP concentration was varied between 1.0 and 5.0 mM. The optimization of pH and enzyme concentration in the presence and absence of PEG was carried out. All experiments were carried out in continuously stirred reactors for 3h at room temperature. The reaction was initiated by adding enzyme to the reaction mixture. For more than 95% removal of DMP, the presence of PEG reduced the inactivation of enzyme so that the required enzyme concentrations were reduced by about 2-fold compared to the same reactions in the absence of PEG. Finally, the PEG concentrations were optimized to obtain the minimum dose required. For higher substrate concentrations, the availability of oxygen was insufficient in achieving 95% or more removal. Therefore, the effect of increasing dissolved oxygen at higher substrate concentration was investigated. The laccase studied was capable of efficiently removing DMP at very low enzyme concentrations and hence shows great potential for cost-effective industrial applications.     

Effect of microbial inoculation during vermicomposting of different organic substrates on microbial status and quantification and documentation of acid phosphatase

In this experiment, three microbial strains were inoculated in two different organic wastes to study their effect on the humic acids content, acid phosphatase activity and microbial properties of the final stabilized products. Pyrophosphate extract of vermicomposts were analyzed through polyacrylamide gel electrophoresis to study the nature of a isozymes in different treatments. Results suggested that vermicomposting increased humic acids content and acid phosphatase activity in organic substrates and microbial inoculation further enhanced the rate of humification and enzyme activity. Although humic acids content in different microorganism-inoculated vermicomposts were statistically at par, acid phosphatase activity in these treatments was significantly (P<0.05) different. Results revealed that microbial respiration was increased due to vermicomposting, but a reduction in microbial biomass was recorded after stabilization of organic wastes. Although vermicomposting increased the value of microbial quotient (qCO(2)), microbial inoculation did not show any significant effect on qCO(2). The zymogram revealed that two isozymes of acid phosphatase (group II and group III) were present in all vermicompost samples and higher acid phosphatase activity in fungi-inoculated vermicomposts might be due to the presence of an additional isozyme (group I) of acid phosphatase.     

Spatiotemporal changes of geomorphic environment in the Muriganga–Saptamukhi estuarine interfluve of Indian Sundarban in the context of climate change: a case study

The surface of the earth has been continuously sculptured by the exogenetic processes primarily by the climatic hydrological attributes. Over the sequential phases of evolution of earth, the climatic attributes have altered. The alternative processes such as glaciation and declaciation, fluctuations of sea level and variability in rainfall pattern have changed the surface configuration through maneuvering the operations of the geographical processes. The issue of climate change has become a matter of scientific concern all over the world as the human communities are facing severe problems manifested in the form of flood, drought and submergence of low-lying coastal regions, estuaries and deltas. The present study is an attempt to understand the nature and extent of climate change (1890–2012) and related sea level rise (1970s–2010) in the deltaic Sundarban region of India since the last century and how far they are impacting the erosion–depositional processes (1925, 1926–2014). The changing trend of mean annual temperature, rainfall pattern and frequencies of tropical cyclones has been studied in detail, and spatiotemporal changes of geomorphic environment in different reaches of the study area have also been monitored with available multi-temporal geospatial data. The observation reveals that the flat sandy coastal belt and low-lying island in the extreme southern part have been severely affected by wave dash and seasonal storm surges which are mostly responsible for vigorous erosion. On the other hand, high tidal velocity is observed along the exposed concave bank in the upper–middle reaches of the Muriganga estuary and exposed outer bank in lower–middle reaches of Saptamukhi estuary. The thalweg line, which is very close to the river bank in those reaches of estuary, intensifies the hydraulic pressure along marginal parts of river bank which leads to erosion. Depositional activities are mostly observed along the sheltered inner reaches and convex river banks of the estuaries due to less effective tidal rushes, shallow channel depth, marginal flow velocity and gentle channel slope. Therefore, erosional and depositional processes cannot be explain by the relative mean sea level rise, because increasing mean sea level will affect the erosional processes uniformly in the entire estuary. In this present study area, both the erosional and depositional processes are simultaneously active depending on geographical exposure, sinuous channel pattern, channel depth and lithological compositions.     

Assessing the potential ecological risk of Co,Cr, Cu,Fe and Zn in the sediments of Hooghly–Matla estuarine system,India

Environmental Geochemistry and Health - Hooghly–Matla estuarine system along with the Sundarbans mangroves forms one of the most diverse and vulnerable ecosystems in the world. We have...