Effects of pH and microbial composition on odour in food waste composting

A major problem for composting plants is odour emission. Slow decomposition during prolonged low-pH conditions is a frequent process problem in food waste composting. The aim was to investigate correlations between low pH, odour and microbial composition during food waste composting. Samples from laboratory composting experiments and two large scale composting plants were analysed for odour by olfactometry, as well as physico-chemical and microbial composition. There was large variation in odour, and samples clustered in two groups, one with low odour and high pH (above 6.5), the other with high odour and low pH (below 6.0). The low-odour samples were significantly drier, had lower nitrate and TVOC concentrations and no detectable organic acids. Samples of both groups were dominated by Bacillales or Actinobacteria, organisms which are often indicative of well-functioning composting processes, but the high-odour group DNA sequences were similar to those of anaerobic or facultatively anaerobic species, not to typical thermophilic composting species. High-odour samples also contained Lactobacteria and Clostridia, known to produce odorous substances. A proposed odour reduction strategy is to rapidly overcome the low pH phase, through high initial aeration rates and the use of additives such as recycled compost.     

Comparative Response of Indigenously Developed Bacterial Consortia on Progressive Degradation of Polyhydroxybutyrate Film Composites

The global demand of bioplastics has lead to an exponential increase in their production commercially. Hence, biodegradable nature needs to be evaluated in various ecosystems viz. air, water, soil and other environmental conditions to avoid the polymeric waste accumulation in the nature. In this paper, we investigated the progressive response of two indigenously developed bacterial consortia, i.e., consortium-I (C-I: Pseudomonas sp. strain Rb10, Pseudomonas sp. strain Rb11 and Bacillus sp. strain Rb18), and consortium-II (C-II: Lysinibacillus sp. strain Rb1, Pseudomonas sp. strain Rb13 and Pseudomonas sp. strain Rb19), against biodegradation behavior of polyhydroxybutyrate (PHB) film composites, under natural soil ecosystem (in net house). The biodegraded films recovered after 6 and 9 months of incubation were analyzed through Fourier transform infrared spectroscopy and scanning electron microscopy to determine the variations in chemical and morphological parameters (before and after incubation). Noticeable changes in the bond intensity, surface morphology and conductivity were found when PHB composites were treated with C-II. These changes were drastic in case of blends in comparison to copolymer. The potential isolates not only survived, but, also, there was a significant increase in bacterial diversity during whole period of incubation. To the best of our knowledge, it is the first report which described the biodegradation potential of Lysinibacillus sp. as a part of C-II with Pseudomonas sp. against PHB film composites.     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

Hydrological performance of MSW incineration residues and MSW co-disposed with sludge in full-scale cells

Water flows were analysed for the filling phase and the first 4 years after closure of two types of full-scale landfill cells: 'special cells' containing mostly fly ash from municipal solid waste (MSW) incineration disposed with other special/hazardous waste, and 'biocells' (biological cells) containing co-disposed MSW and food industry sludge. The landfill cells were constructed about -1.5 m above sea level (masl) at Lomma Bay, southern Sweden. The hydrological effects of water intrusion into the special cells from surroundings and sludge moisture within the biocells were studied. HELP modelling of hydrological processes predicted delay in peaks of leachate generation from uncovered special cells following rain, which was not confirmed. Faster leachate production as a response to rainfall from special cells than from biocells was observed. It was inferred that special waste has more intensive channelling, lower water absorption and higher hydraulic conductivity than mixtures of sludge/MSW. To avoid convergence problems in modelling uncovered special cells, the use of a 5 cm deep top layer with saturated hydraulic conductivity 1.7 x 10(-3) cm s(-1), porosity 0.437, and field capacity 0.105, is suggested.     

Carbonation of MSWI-bottom ash to decrease heavy metal leaching, in view of recycling

The 0.1-2 mm fraction of a MSWI-bottom ash cannot be used as granular construction material because leaching of Cu exceeds Flemish limit values. In addition, leaching of Ba, Mo and Sb exceeds informal limit values. Leaching characteristics thus need to be improved. Carbonation was the chosen treatment method and this was performed by placing samples in a CO2 chamber. The CO2 percentage and the temperature of the chamber atmosphere, as well as the initial humidity of the samples, were varied to optimize carbonation parameters. Metal leaching was tested with the EN 12457 extraction test. Carbonation decreased Cu leaching from 3.3 to 1.0 mg/kg, but not yet to below the official limit value of 0.5 mg/kg. Leaching of Mo and Sb remained fairly constant or even increased after carbonation, but their limit values are only informal. Ba leaching decreased to below the informal limit value. Carbonation also caused Cr leaching to increase, in some cases to above the official limit value. Of the tested parameters, a CO2 percentage of 10% and a carbonation temperature of 50 degrees C in the atmosphere, together with ash humidity between 13% and 25% appeared to give the best leaching results. The main carbonation reactions took place within the first 24 h.     

Mathematical model for carbon dioxide evolution from the thermophilic composting of synthetic food wastes made of dog food

The impacts of the aeration and the agitation on the composting process of synthetic food wastes made of dog food were studied in a laboratory-scale reactor. Two major peaks of CO(2) evolution rate were observed. Each peak represented an independent stage of composting associated with the activities of thermophilic bacteria. CO(2) evolutions known to correlate well with microbial activities and reactor temperatures were fitted successfully to a modified Gompertz equation, which incorporated three biokinetic parameters, namely, CO(2) evolution potential, specific CO(2) evolution rate, and lag phase time. No parameters that describe the impact of operating variables are involved. The model is only valid for the specified experimental conditions and may look different with others. The effects of operating parameters such as aeration and agitation were studied statistically with multivariate regression technique. Contour plots were constructed using regression equations for the examination of the dependence of CO(2) evolution potentials on aeration and agitation. In the first stage, a maximum CO(2) evolution potential was found when the aeration rate and the agitation parameter were set at 1.75 l/kg solids-min and 0.35, respectively. In the second stage, a maximum existed when the aeration rate and the agitation parameter were set at 1.8 l/kg solids-min and 0.5, respectively. The methods presented here can also be applied for the optimization of large-scale composting facilities that are operated differently and take longer time.     

Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Detecting the signal of atmospheric N deposition in recent national-scale vegetation change across Britain

Model estimates of NO_y and NH_x deposition across Britain for 1996 (5 km square resolution) were applied as explanatory variables to account for national-scale, fine-grained changes in plant species composition between 1990 and 1998. Plant species data were recorded from up to 27 fixed plots located within a stratified random sample of 596 1 km². The response variable was a cover-weighted Ellenberg fertility score for each plot. Analyses were carried out separately for woodlands, semi-natural grasslands and heaths/bogs. Most of the variation in the botanical response variable occurred between plots within squares and so could not be explained by the model deposition data. NH_x deposition estimates accounted for significant, but small components of between 1 km² variation in the change in Ellenberg score in grasslands (5.6%) and heath/bogs (9.8%) but not woodlands. NO_y deposition estimates were not significantly associated with vegetation change. Linear models provided the best fit and the slope of the relationship was lower for heath/bogs than grasslands. Further signal attribution at sub-kilometre square scales requires the development of fine-grained models of N deposition that can be generalised across regional sampling domains.