Alumina-supported oxime for the degradation of sarin and diethylchlorophosphate

1-(4-Chlorophenyl))-N-hydroxymethanimine and cyclohexyl-N-hydroxymethanimine were synthesized and a well-established oxime, i.e., 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride was purchased. Thereafter; all were loaded over Al₂O₃ using incipient wetness technique. The prepared systems were characterized using surface area analyzer, scanning electron microscope, energy dispersive X-ray spectrophotometer, Fourier transform infrared spectrophotometer and thermogravimetric analyzer. Kinetics of the degradation of sarin (GB) and simulant, i.e. diethylchlorophosphate (DEClP) was studied over synthesized oxime impregnated Al₂O₃ and results were compared with well reported oxime impregnated Al₂O₃. Kinetics of reaction was found to be following the pseudo first order reaction kinetics. The order of reactivity of the prepared systems was found to be cyclohexyl-N-hydroxymethanimine/Al₂O₃ > 1-(4-chlorophenyl)-N-hydroxymethanimine/Al₂O₃ > 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride/Al₂O₃ > Al₂O₃. From the reaction kinetics it was observed that the reaction with DEClP was faster than with GB. Cyclohexyl-N-hydroxymethanimine/Al₂O₃ was found to be the most reactive system with half-life of 0.94 and 15 h for DEClP and GB respectively.     

Characterization and pollutant removal efficiency of biochar derived from baggase,bamboo and tyre

Conversion of broad-spectrum organic waste into carbonaceous biochar has gained enormous interest in past few years. The present study aims to characterize feedstock (FS), i.e. bagasse (Bg), bamboo (Bm) and biochar (BC), i.e. baggase biochar (BBg), bamboo biochar (BBm) and tyre biochar (Ty). Significant changes in elemental composition, atomic ratio, proximate analyses, mineral content and heavy metal content were observed which was well supported by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis. Impregnation with ferric hydroxide was done, and resultant modified biochars (MBC), i.e. iron-impregnated baggase biochar (FeBBg), iron-impregnated bamboo biochar (FeBBm) and iron-impregnated tyre biochar (FeTy), along feedstock and biochar were used for PO₄ ^3?, Pb, Hg and Cu adsorption. In general, BBg, FeBBg, BBm, FeBBm, Ty and FeTy were found to adsorb PO₄ ^3?, Pb, Hg and Cu better than Bg and Bm, except in few cases. Results from adsorption experiments were fitted into Langmuir, Freundlich and Temkin models of isotherms and pseudo-first-order, pseudo-second-order and Elovich models of kinetics. Result of batch study adsorption revealed that maximum adsorption of PO₄ ^3?, Pb, Hg and Cu was done by FeBBg (adsorption mechanism explained by Freundlich model), FeTy (Temkin model), Ty (Langmuir model) and BBm (Langmuir model) respectively. According to R ² values, pseudo-first-order reaction was well suited to PO₄ ^3?, Pb, Hg and Cu adsorption. The optimum pH for maximum adsorption was observed to be 7.4 for PO₄ ^3?, 5 for Cu and 6 for Pb and Hg respectively     

Impact of different types of polluted irrigation water on soil fertility and wheat grain yield in clayey black soils of central India

This study was carried out in three different cities of western Madhya Pradesh (India) to investigate the effects of long-term irrigation with industrial waste water (IWW), contaminated groundwater (CGW), and untreated municipal sewage water (USW) on soil fertility as well as on wheat crop yield. Irrigation with these three types of polluted water increased organic matter content as well as contents of available P (with IWW and USW only), available K, available S, available Zn, available Cu (IWW only), and available Mn (IWW and CGW only). The magnitude of improvement in soil fertility status was the highest in the case of USW, followed by IWW and finally, by CGW. Concentrations of Na in wheat leaf tissue increased by 198 and 58 % whereas concentrations of Ca decreased significantly by 16 and 13 % due to the use of IWW and CGW, respectively, resulting in poor Ca nutrition to the crop. Although wheat grain yield increased considerably due to USW, the same recorded significant decreases with IWW and CGW. In spite of the enhancement in the available nutrient status, decrease in wheat grain yield with the use of IWW and CGW could be due to the build-up of salts in the soil and an imbalance in the Na/Ca ratio in wheat crops irrigated with IWW and CGW. The adverse effect on wheat productivity was more pronounced with IWW as compared to CGW.     

Assessing the potentials of Lemna minor in the treatment of domestic wastewater at pilot scale

Water crisis is one of the most serious problems faced by the world today. Phytoremediation is one of the serious efforts towards sustainability. Macrophyte-based wastewater treatment systems have several potential advantages compared with conventional treatment systems. Duckweeds (Lemna spp., Spirodela spp., Wolffia spp.) are small, green freshwater, free-floating aquatic plants. The primary objective of this work was to analyze the role of duckweeds in organic waste and nutrient removal from domestic wastewater being generated from hostels of Birla Institute of Technology, Mesra, Ranchi (India). Interesting results were obtained in which the BOD value reduced by 94.45% and the level of orthophosphate at the end of the work was found to be reduced by 79.39%. The duckweeds flourished well during the experimental period in the pH range of 7 to 8; it can be said that, other factors remaining favorable, the optimum pH for duckweed growth ranges from 7 to 8. Therefore, it can be concluded that this treatment can be successfully carried out on a large scale. Also, it is a low-cost solution to wastewater treatment problems and could satisfy the discharge standards.     

Arsenic occurrence and accumulation in soil and water of eastern districts of Uttar Pradesh, India

Arsenic in the soil and water of eastern districts of Uttar Pradesh (Ballia and Ghazipur) was estimated. Survey results revealed that arsenic in soil samples ranged from 5.40 to 15.43 parts per million (ppm). In water samples, it ranged from 43.75 to 620.75 parts per billion (ppb) which far exceeded the permissible limit of 10 ppb as recommended by the World Health Organization. Maximum concentration of arsenic in water was found in Haldi village of Ballia (620.75 ppb). However, mean arsenic concentration in water followed the order: Karkatpur (257.21 ppb) < Haldi (310.15 ppb) < Sohaon (346.94 ppb) < Dharmarpur (401.75 ppb). In case of soil, maximum arsenic was detected in soil of Sohaon (15.43 ppm). Mean arsenic levels in soils followed the order: Karkatpur (9.24 ppm) < Haldi (9.82 ppm) < Dharmarpur (11.32 ppm) < Sohaon (14.08 ppm). Arsenic levels were higher in soils collected from 15–30 cm depth than 0–15 cm from the soil surface.     

Water quality assessment of Majhiaon block of Garwa district in Jharkhand with special focus on fluoride analysis

Fluoride in groundwater is known to contaminate the water sources globally. Jharkhand, one of the states in the eastern part of India, is known to have excessive fluoride content in groundwater sources. The present work involves assessment of water quality with special reference to fluoride in Majhiaon block of Garwa district in Jharkhand. Iron, nitrate and arsenic were also tested for the water samples collected from site. Eight hundred forty samples were tested for fluoride on site using colourimetry method, and one tenth of the samples were brought to laboratory for iron, nitrate, arsenic and fluoride analysis. Results show that 402 samples were having fluoride above permissible limit. Iron and nitrate were found to be beyond permissible limits in 302 and 286 water samples, respectively. More than 50% of samples collected from school had fluoride levels above permissible limits. Arsenic was well within the limits. However, few samples shown were excessive of iron and nitrate.     

Studies on urban drinking water quality in a tropical zone

Anthropogenic activities associated with industrialization, agriculture and urbanization have led to the deterioration in water quality due to various contaminants. To assess the status of urban drinking water quality, samples were collected from the piped supplies as well as groundwater sources from different localities of residential, commercial and industrial areas of Lucknow City in a tropical zone of India during pre-monsoon for estimation of coliform and faecal coliform bacteria, organochlorine pesticides (OCPs) and heavy metals. Bacterial contamination was found to be more in the samples from commercial areas than residential and industrial areas. OCPs like α,γ-hexachlorocyclohexane and 1,1 p,p-DDE {dichloro-2, 2-bis(p-chlorophenyl) ethene)} were found to be present in most of the samples from study area. The total organochlorine pesticide levels were found to be within the European Union limit (0.5 μg/L) in most of the samples. Most of the heavy metals estimated in the samples were also found to be within the permissible limits as prescribed by World Health Organization for drinking water. Thus, these observations show that contamination of drinking water in urban areas may be mainly due to municipal, industrial and agricultural activities along with improper disposal of solid waste. This is an alarm to safety of public health and aquatic environment in tropics.     

The effects of meteorological parameters in ambient noise modelling studies in Delhi

The acoustic environment in urban areas has gained prominence in recent times due to rapid industrial and commercial development in metropolitan cities. Various attempts have been made to predict and model the trends in urban ambient noise levels using different statistical and dynamic models. The present study makes an attempt to examine the role of meteorological parameters affecting the ambient noise levels in Delhi. The results show significant improvement in overall noise scenario of Delhi since the introduction of compressed natural gas vehicles in public transport of Delhi. The noise level is significantly reduced by high vegetation cover as well as by low relative humidity over Delhi. The regression models developed for the present study clearly show the significant contribution of meteorological parameters in governing the ambient noise levels in Delhi.     

Determination of pesticide residues in IPM and non-IPM samples of mango (Mangifera indica)

Studies were conducted to analyze the residue of commonly used pesticides viz. methyl parathion, chloropyrifos, endosulfan, cypermethrin, fenvalerate, carbendazim, imidacloprid and carbaryl in mango, Dashehari variety, integrated pest management (IPM) and non-IPM samples were collected from the IPM and non-IPM orchards, Lucknow, India. We also present a method for the simultaneous determination of these pesticides in mango samples. Residues of methyl parathion, chloropyriphos, endosulfan, cypermethrin, fenvalerate were extracted from the samples with acetone: cyclohexane: ethyl acetate in the ratio 2:1:1 followed by cleanup using neutral alumina. Analysis was performed by gas chromatography-electron capture detector (GC-ECD) with a megabore column (OV-1). Residues of carbendazim, imidacloprid and carbaryl were extracted with acetone and after cleanup, analysis was performed by high performance liquid chromatography (HPLC) using photo diode array (PDA) detector. Recoveries of all the pesticides ranged between 72.7-110.6%, at 0.1 and 1.0 microg g(-1) level of fortification. The residues detected in non-IPM samples of mango were found to be below the prescribed limits of maximum residue limit (MRL) while IPM samples were free from pesticide residues.