Optimization of pretreatment conditions for enhanced sugar release

Present investigation was done to evaluate various algal genera found in water bodies of Varanasi city. The potential of any biomass for biofuels (bioalcohols, biohydrogen, etc.) production depends on the quantity of extractable sugar present in it. Acid (H₂SO₄) and alkali (NaOH) pretreatment were performed, and H₂SO₄ was chosen due to its nearly double yield as compared with alkaline pretreatment. Response surface methodology was utilized for the optimization of operating parameters such as treatment temperature, time, and acid concentration. Sugar yield up to 0.33 g/g of dry biomass was obtained using cyanobacterial biomass of Lyngbya limnetica, at 100°C, 59.19 min, and H₂SO₄ concentration of 1.63 M.     

Ggum-poly(Itaconic Acid) Based Superabsorbents Via Two-Step Free-Radical Aqueous Polymerization for Environmental and Antibacterial Applications

Ggum-based conducting hydrogels possessing dye removal and antibacterial property were developed by two-step free-radical aqueous polymerization method. Conductivity was introduced with polyaniline (PANI) chains incorporated within the crosslinked network of Ggum-poly(itaconic acid) superabsorbent. The material properties of the synthesized samples were characterized using FTIR spectroscopy, thermal analysis and scanning electron microscopy techniques. Results showed that synthesized samples exhibited the best antibacterial activity against Gram-positive bacteria. Synthesized samples were found to be effective in removal of toxic methylene blue (MB) dye from the waste water. The adsorption kinetics of superabsorbents has been described by using pseudo first and pseudo second order kinetics models. Furthermore, application of hydrogels to improve the water retention properties of different soils was also studied for agricultural purpose.     

Application of ameliorated wood pulp to recover Cd(II), Pb(II), and Ni(II) from e-waste

In this study, dl-malic acid and hydrogen peroxide were used as leaching agents to remove metals from e-waste (printed-circuit boards) and itaconic acid-grafted poly(vinyl alcohol)-encapsulated wood pulp (IA-g-PVA-en-WP) to uptake metals from leachate with high proficiency [11.63 mg g^?1; 93.03 % for Cd(II), 11.90 mg g^?1; 95.18 % for Pb(II), and 12.14 mg g^?1; 97.08 % for Ni(II)]. Metals were recovered from the loaded biosorbent by desorption studies. The standard analytical techniques, such as elemental analysis, Fourier-transform-infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis, were used to characterize the recovering agent (biosorbent). At equilibrium, the metal uptake data were fitted to Langmuir and D–R isotherms (R ² > 0.99) significantly, revealing, the homogeneous distribution of active sites on biosorbent’s backbone. The possible mechanism appeared to be ion exchanges of metal ions with H⁺ together with binding over functionalities (COO^?). Dimensionless equilibrium parameter (R _L) showed the favourability of metal uptake at lower concentration, while mean adsorption energy (E) certified the physical binding of metal on functionalities which was further confirmed by sticking probability and activation energy parameters. Reusability studies were also conducted to state the performance of biosorbent.     

Evaluating the effectiveness of fingerling stocking and ecological perspectives in enhancing fish harvest in a large tropical reservoir of Northern India

Environment, Development and Sustainability - The present study evaluated the effectiveness of stocking the Gangetic carps, viz. Labeo catla, Labeo rohita, and Cirrhinus mrigala, in a large...     

Recycle of bio-waste banana and sisal fiber filled harmlessness epoxy hybrid composite for automotive roof application

Insists of polymer matrix composite is prepared by using natural fiber facilitates high tensile, flexural, and impact toughness properties. The natural fiber utilization in the polymer matrix can overcome the synthetic fiber demerits of poor compatibility, high moisture absorption, and high cost. The present research investigates developing a low-cost, environmentally eco-friendly epoxy hybrid composite using different volume percentages of chopped natural waste banana (0Vol%, 5Vol%, 10Vol%, and 15Vol%) and sisal fiber (0Vol%, 15Vol%, 10Vol%, and 5Vol%) through hand mould hot compression technique. The presence of natural waste banana and sisal fiber on tensile strength, flexural strength, and thermal adsorption properties of the epoxy hybrid composite are evaluated by ASTM test standards. The ASTM standard measured test results of epoxy hybrid composite with and without natural waste banana and sisal fiber were compared and sample three was identified by good tensile strength, flexural strength, and better thermal adsorption properties compared to all others. The sample three epoxy hybrid sample is recommended for automotive roof application.     

A combined model–observation approach to estimate historic gridded fields of PM2.5 mass and species concentrations

This paper introduces a methodology for estimating gridded fields of total and speciated fine particulate matter (PM_2.5) concentrations for time periods and regions not covered by observational data. The methodology is based on performing long-term regional scale meteorological and air quality simulations and then integrating these simulations with available observational data. To illustrate this methodology, we present an application in which year-round simulations with a meteorological model (the National Center for Atmospheric Research/Penn State Mesoscale Model, hereafter referred to as MM5) and a photochemical air quality model (the Community Multiscale Air Quality Model, hereafter referred to as CMAQ) have been performed over the northeastern United States for 1988–2005. Model evaluation results for total PM_2.5 mass and individual species for the time period from 2000 to 2005 show that model performance varies by species, season, and location. Therefore, an approach is developed to adjust CMAQ output with factors based on these three variables. The adjusted model values for total PM_2.5 mass for 2000–2005 are compared against independent measurements not utilized for the adjustment approach. This comparison reveals that the adjusted model values have a lower root mean square error (RMSE) and higher correlation coefficients than the original model values. Furthermore, the PM_2.5 estimates from these adjusted model values are compared against an alternate method for estimating historic PM_2.5 values that is based on PM_2.5/PM₁₀ ratios calculated at co-located monitors. Results reveal that both methods yield estimates of historic PM_2.5 mass that are broadly consistent; however, the adjusted CMAQ values provide greater spatial coverage and information for PM_2.5 species in addition to total PM_2.5 mass. Finally, strengths and limitations of the proposed approach are discussed in the context of potential uses of this method.     

Particle size distribution of aerosols and associated heavy metals in kitchen environments

Mass size distributions of total suspended particulate matter (TSPM) was measured from Sep 2002 to April 2003 in indoor kitchen environments of five locations in Jawaharlal Nehru University (JNU), New Delhi, with the help of a high volume cascade impactor. Particulate matters were separated in five different size ranges, i.e. >10.9 microm, 10.9-5.4 microm, 5.4-1.6 microm, 1.6-0.7 microm and <0.7 microm. The particle size distribution at various sites appears to follow uni-modal trend corresponding to fine particles i.e. size range <0.7 microm. The contributions of fine particles are estimated to be approximately 50% of TSPM and PM10.9, while PM10.9 comprises 80% of TSPM. Good correlations were observed between various size fractions. Regression results reveal that TSPM can adequately act as a surrogate for PM10.9 and fine particles, while PM10.9 can also act as surrogate for fine particles. The concentrations of heavy metals are found to be dominantly associated with fine particles. However, the concentration of some metals and their size distribution, to some extent is also site specific (fuel type used).     

Interaction of ions in water affects water quality of freshwater lake: a case study of major lakes of North India

The influence of ionic composition on the water chemistry and thereby on aquatic flora was investigated. Two major wetlands of North India were taken for the study. Quality parameters of the lakes showed the enrichment of the water especially in the month of September with higher values of P and BOD in almost all of the lakes viz., LSJ, LCH, LSN, and LHT as <5.0, 9.0, 1.0, 1.7 and <7.3, 6.0, 6.3, and 4.0, respectively. Statistically correlated values of the ions in the water quality showed an effect of one on another. An attempt has also been made to investigate if ionic constituent is one of the major causes affecting the aquatic floral diversity.     

Occurrence and distribution of hexachlorocyclohexane isomers in vegetation samples from a contaminated area

The occurrence and distribution of four major hexachlorocyclohexane (HCH) isomers (alpha-, beta-, gamma- and delta-) were studied in vegetation samples of a highly contaminated area close to a small-scale industrial belt in Lucknow (North India). Eight species of plants were collected at different points of the contaminated area and different parts of the plants were separated in order to study the difference in uptake and accumulation. The samples were extracted by matrix solid-phase dispersion (MSPD) extraction and finally determined by a gas-chromatograph equipped with (63)Ni electron capture detector (ECD). HCH isomers were present in almost all samples and the concentration of total HCH in the plant sample analyzed varied between 13 and 44 mg kg(-1), being the main isomer of beta-HCH (8-22 mg kg(-1)). Lindane (gamma-HCH) was present in all samples (1-9 mg kg(-1)). Solanum torvum Sw., and Erianthus munja shows the highest and lowest capacity for accumulation of HCH, respectively with a significant difference at p<0.01 level. The highest concentration of HCH residue in root samples indicates the most likely mechanism of HCH accumulation in these plants was sorption of soil HCH on roots. Solanum torvum Sw., and Withania somnifera (L.) Dunal could accumulate considerable levels of HCH isomers (44 and 34 mg kg(-1), respectively). The results reflect the importance of plants in monitoring purposes and their potential for phytoremediation of HCH contaminated soils.     

Influence of plant growth promoting bacteria and its mutant on heavy metal toxicity in Brassica juncea grown in fly ash amended soil

In this study a metal tolerant plant growth promoting bacteria, NBRI K28 Enterobacter sp. was isolated from fly ash (FA) contaminated soils. The strain NBRI K28 and its siderophore overproducing mutant NBRI K28 SD1 were found capable of stimulating plant biomass and enhance phytoextraction of metals (Ni, Zn and Cr) from FA by metal accumulating plant i.e. Brassica juncea (Indian mustard). Concurrent production of siderophores, Indole acetic acid (IAA) and phosphate solubilization revealed its plant growth promotion potential. The strain also exhibited 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activity. In most of the cases mutant of NBRI K28, exerted more pronounced effect on metal accumulation and growth performance of B. juncea plants than wild type.