Correlation of ambient inhalable bioaerosols with particulate matter and ozone: a two-year study

In this study, we have examined the relationships between the concentrations of ambient inhalable airborne fungi and pollen with PM10, PM2.5, ozone, organic carbon, selected trace metals (cadmium, copper, lead, and zinc), temperature, and relative humidity. The database was collected in Cincinnati, Ohio, USA, during two consecutive years. Measurements of all environmental variables were performed at the same site continuously 5 days a week except during winter months. The airborne concentrations of biological and non-biological pollutants ranged as follows: total fungi: 184-16 979 spores m(-3); total pollen: 0-6692 pollen m(-3); PM10: 6.70-65.38 microg m(-3); PM2.5: 5.04-45.02 microg m(-3); and ozone: 2.54-64.17 ppb. Higher levels of total inhalable fungi and particulate matter were found during fall and summer months. In contrast, total pollen concentration showed elevated levels in spring. Peak concentrations of ozone were observed during summer and beginning of fall. Our study concluded that several types of inhalable airborne fungi and pollen, particulate matter, and ozone could be positively correlated as a result of the atmospheric temperature influence.     

Variation in PAH inputs and microbial community in surface sediments of Hamilton Harbour: implications to remediation and monitoring

Variations in concentrations of polycyclic aromatic hydrocarbons (PAHs) and microbial community indicators were investigated in representative highly contaminated and less contaminated surface sediment sites of Hamilton Harbour. Inputs of PAH to the upper 3cm of sediments up to four times the average upper sediment concentrations were observed. Associated PAH fingerprint profiles indicated that the source was consistent with the PAH source to the industrial region of the harbour. Increased PAH loadings were associated with decreased bacterial populations as indicated by phospholipid fatty acid (PLFA) concentrations. However, relatively minor impacts on overall community composition were indicated. Porewater methane concentrations and isotopic data indicated a difference in the occurrence of methane oxidation between the two sites. This study confirms temporally limited transport of contaminants from highly impacted regions as a vector for contaminants within the harbour and the impact on microbial carbon cycling and bed stability.     

Identifying correlates of success and failure of native freshwater fish reintroductions

Reintroduction of imperiled native freshwater fish is becoming an increasingly important conservation tool amidst persistent anthropogenic pressures and new threats related to climate change. We summarized trends in native fish reintroductions in the current literature, identified predictors of reintroduction outcome, and devised recommendations for managers attempting future native fish reintroductions. We constructed random forest classifications using data from 260 published case studies of native fish reintroductions to estimate the effectiveness of variables in predicting reintroduction outcome. The outcome of each case was assigned as a success or failure on the basis of the author's perception of the outcome and on whether or not survival, spawning, or recruitment were documented during post‐reintroduction monitoring. Inadequately addressing the initial cause of decline was the best predictor of reintroduction failure. Variables associated with habitat (e.g., water quality, prey availability) were also good predictors of reintroduction outcomes, followed by variables associated with stocking (e.g., genetic diversity of stock source, duration of stocking event). Consideration of these variables by managers during the planning process may increase the likelihood for successful outcomes in future reintroduction attempts of native freshwater fish. Identificación de Correlaciones de Éxito y Fracaso de Reintroducciones de Peces de Nativos Agua Dulce     

Partitioning coefficients of polycyclic aromatic hydrocarbons in stack gas from a municipal incinerator

In this study, solid-gas partitioning coefficients of PAHs on fly ash in stack gas from a municipal incinerator were determined according to elution analysis with gas-solid chromatography. The fly ash from the electrostatic precipitator was sieved and packed into a 1/4 inch (6.3 mm) pyrex column. Elution analysis with gas-solid chromatography was conducted for three PAHs, Napthalene, Anthracene, and Pyrene. The temperature for elution analysis was in the range of 100°C to 300°C. V_g, specific retention volume obtained from elution analysis, and S, specific surface area of fly ash measured by a surface area measurement instrument, were used to estimate the solid-gas partitioning coefficient, K_R. In addition, the relationships between K_R and temperature and K_R and PAH concentrations were investigated.     

Evaluating Experience with Renewables Portfolio Standards in the United States

Increased use of renewable energy is one of several promising methods for reducing emissions of local, regional, and global air pollutants, including greenhouse gas emissions associated with fossil-fuel based electricity production. Among the available options for encouraging renewable electricity generation, the renewables portfolio standard (RPS) has become especially popular in recent years. The RPS is a newly established policy mechanism, however, and experience with its use has not been widely documented and evaluated. This paper describes and evaluates the design, impacts, and early experience of 13 U.S. state RPS policies. These 13 policies share a common goal of encouraging renewable energy supply, but each specific RPS is designed differently. Our evaluation shows both successes and failures with this policy mechanism; some state RPS policies are positively impacting renewable energy development, while others have been poorly designed and will do little to advance renewable energy markets.We emphasize the importance of policy design details, and specifically highlight critical design pitfalls that have been commonly experienced. Though experience with the RPS is still limited, we have now gained some knowledge of the conditions and design features necessary to make an RPS policy work. An important objective of this article is therefore to identify and describe broad policy design principles and specific best practice design elements that might be used to guide the design of future renewables portfolio standards.     

Prenatal evaluation and in utero platelet transfusion for thrombocytopenia absent radii syndrome

A fetus with absent radii in both forearms was discovered on routine ultrasound examination performed at 18 weeks of pregnancy. No other significant abnormalities were found, and no signs of haemorrhage were detected. Serial ultrasound examinations revealed no evidence of fetal internal bleeding. At 37 weeks of pregnancy, a CBC obtained by cordocentesis under ultrasound guidance confirmed the diagnosis of thrombocytopenia absent radii (TAR) syndrome. Apheresis platelets were transfused into the umbilical vein to correct the thrombocytopenia and was followed by an uncomplicated delivery. No bleeding was encountered during the remainder of the baby's neonatal course. We conclude that TAR syndrome can be readily identified prenatally on sonogram, and if severe thrombocytopenia is confirmed by cordocentesis, platelets should be transfused to diminish the risk of serious internal bleeding during and immediately after delivery.     

Lack of sampling site variation in chorion villus biopsy as assessed by DNA,enzymatic, morphological and cytogenetical analyses

A study of villus samples from eight random sites on five electively aborted chorion sacs was performed to determine any significant differences in yield, quality and composition of DNA, iduronate sulphate sulphatase activity and karyoptype status. The villi were also examined for their histological characteristics (e.g. stem, intermediate or terminal villi) and for HCG and BGP immuno-reactivities. The overall findings indicated no significant site to site variations in any of the parameters studied. It is therefore proposed that any villus should be equally suitable for prenatal diagnosis.     

Forecasting peak daily ozone levels--I. A regression with time series errors model having a principal component trigger to fit 1991 ozone levels

This research was motivated by the need to warn the population of Milwaukee, WI, on high-ozone days. A statistical model for the peak daily 1-hr ozone level is proposed. A Regression with Time Series Errors (RTSE) model, which includes a principal component (PC) trigger, is the basis for forecasting the peak daily 1-hr ozone level. The RTSE model, with a PC trigger, is first employed to estimate daily peak ozone measured at the University of Wisconsin, Milwaukee-North (UWM-N), during the 1991 ozone season. The RTSE model uses peak daily temperature, morning vector average wind direction, and the PC trigger as predictor variables. The PC trigger was designed to summarize atmospheric circumstances when peak ozone was greater than 100 parts per billion (ppb). It is verified that the RTSE model, with a PC trigger, significantly improves the prediction of peak daily ozone, particularly peak ozone greater than 100 ppb. In comparison with the RTSE model without the PC trigger, the RTSE model with a PC trigger raised the R2 from 0.680 to 0.809. It is suggested that the RTSE model, with the PC trigger, is an adequate statistical model that has the potential for real-time ozone forecasting.     

Electrostatic enhancement of collection efficiency of the fibrous filter pretreated with ionic surfactants

A study of the electrostatic enhancement of collection efficiency of filters pretreated with ionic surfactants has been carried out in controlled conditions with monodisperse aerosols. Cationic surfactant (dimethyl dioctadecylammonium bromide [DDAB]) and anionic surfactant (sodium oleate [SO]) were used to pretreat polypropylene fibrous filters as the positively and negatively charged filters, respectively. The effects of aerosol size, aerosol charge state, face velocity, aerosol type, and relative humidity (RH) were considered to elucidate their influence on the aerosol penetration. Results indicate that penetration through surfactant-pretreated filters was lower than that through untreated filters, and pretreatment of the filter with surfactant was observed not to affect the structure of the filter. The electrofieldmeter direct-measured the very clear electric field of filter when treating ionic surfactants. The results proved that pretreatment with surfactant caused filters to become charged. Comparing penetration through surfactant-pretreated filters with that through untreated filters with neutral aerosol, the penetration reduction factor of the surfactant-pretreated filters was in the range 1.3-2.2. Comparing aerosol penetration through the surfactant-pretreated filters with singly charged aerosol with that through untreated filters with uncharged aerosol indicates that the former decreases by a factor of 1.8-48.8. The surface fiber charges of the DDAB- and SO-pretreated filters were calculated to be 2.02 x 1(-10) C/m and -1.53 x 10(-1) degrees C/m. Moreover, the aerosol penetrations through the surfactant-pretreated filters increased with the face velocity. Surfactant-pretreated filters performed better against solid aerosol than against liquid aerosol. RH has no effect on aerosol penetration through the surfactant-pretreated filters. Regression equations for Coulombic and dielectrophoretic single-fiber efficiencies in terms of the dimensionless parameters could be fitted by the experimental measurements of surfactant-pretreated filters in this work.