Emergence cues of a mayfly in a high-altitude stream ecosystem: potential response to climate change.

To understand the consequences of human accelerated environmental change, it is important to document the effects on natural populations of an increasing frequency of extreme climatic events. In stream ecosystems, recent climate change has resulted in extreme variation in both thermal and hydrological regimes. From 2001 to 2004, a severe drought in western United States corresponded with earlier emergence of the adult stage of the high-altitude stream mayfly, Baetis bicaudatus. Using a long-term database from a western Colorado stream, the peak emergence date of this mayfly population was predicted by both the magnitude and date of peak stream flow, and by the mean daily water temperature, suggesting that Baetis may respond to declining stream flow or increasing water temperature as proximate cues for early metamorphosis. However, in a one-year survey of multiple streams from the same drainage basin, only water temperature predicted spatial variation in the onset of emergence of this mayfly. To decouple the effects of temperature and flow, we separately manipulated these factors in flow-through microcosms and measured the timing of B. bicaudatus metamorphosis to the adult stage. Mayflies emerged sooner in a warmed-water treatment than an ambient-water treatment; but reducing flow did not accelerate the onset of mayfly emergence. Nonetheless, using warming temperatures to cue metamorphosis enables mayflies to time their emergence during the descending limb of the hydrograph when oviposition sites (protruding rocks) are becoming available. We speculate that large-scale climate changes involving warming and stream drying could cause significant shifts in the timing of mayfly metamorphosis, thereby having negative effects on populations that play an important role in stream ecosystems.     

Patterns of organochlorine pesticide contamination in neotropical migrant passerines in relation to diet and winter habitat

Eleven species of Neotropical migrant passerines collected in Illinois (USA) during May 1996, were analyzed for the presence of organochlorine (OC) pesticides. At least one of five OC pesticide residues was detected in 66 of 72 birds, representing all species examined. The contaminants most frequently detected were p,p'-DDE, dieldrin and heptachlor epoxide, all of which were present in the 10-30 ng/g range. Insectivores had significantly higher levels of these compounds than did non-insectivores, while there was no significant main effect of winter habitat (forest and scrub). Future research on OC pesticide contamination in resident New World passerines may allow more accurate predictions regarding the sources of contamination in Neotropical migrants.     

Deposition of fixed atmospheric nitrogen and foliar nitrogen content of bryophytes and Calluna vulgaris (L.) Hull

Atmospheric deposition of fixed nitrogen as nitrate and ammonium in rain and by dry deposition of nitrogen dioxide, nitric acid and ammonia has increased throughout Europe during the last two decades, from 2-6 kg N ha(-1) year(-1) to 15-60 kg N ha(-1) year(-1). The nitrogen contents of bryophytes and the ericaceous shrub Calluna vulgaris have been measured at a range of sites, with the objective of showing the degree to which nitrogen deposition is reflected in foliar plant nitrogen. Tissue nitrogen concentrations of herbarium bryophyte samples and current samples of the same species collected from the same sites were compared. No significant change in tissue nitrogen was recorded at a remote site in north-west Scotland where nitrogen inputs are small (< 6 kg N ha(-1) year(-1)). Significant increases in tissue N occurred at four sites ranging from 38% in central Scotland to 63% in Cumbria where nitrogen inputs range from 15 to 30 kg N ha(-1) year(-1). The relationships found between the estimated input of atmospheric nitrogen and the tissue nitrogen content of the selected bryophytes and Calluna at the sites investigated were found to be generally linear and fitted the form N(tissue) = 0.62 + 0.022 N(dep) for bryophytes and N(tissue) = 0.83 + 0.045 N(dep) for Calluna. There was thus an increase in total tissue nitrogen of 0.02 mg g(-1) dry weight for bryophytes and 0.045 mg g(-1) dry weight for Calluna for an increase in atmospheric nitrogen deposition of 1 kg ha(-1) year(-1). The lowest concentrations were found in north-west Scotland and the highest in Cumbria and the Breckland heaths of East Anglia, both areas of high atmospheric nitrogen deposition (30-40 kg N ha(-1) year(-1)). The implications of increased tissue nitrogen content in terms of vegetation change are discussed. Changes in atmospheric nitrogen deposition with time were also examined using measured values and values inferred from tissue nitrogen content of mosses. The rate of increase in nitrogen deposition is not linear over the 90-year period, and the increases were negligible over the period 1880-1915. However, during the period 1950 to 1990 the data suggest an increase in nitrogen deposition of 2 kg N ha(-1) every 10 years.     

Assessing workplace chemical exposures: the role of exposure monitoring

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing molecules to diffuse to the sorbent surface. Transfer of the collected chemicals to the analytical instrumentation can be accomplished using solvent displacement and injection, or through the application of heat to bring the collected molecules back into the vapor phase. For particles, the particle size is important as this determines the site of deposition in the lungs, and so time-integrated sampling on filters using various types of size-selective samplers is preferred. Finally, some techniques that have been used to assess the potential for chemical contamination of the skin are presented. Biomonitoring is another tool that can be used to assess exposure, and the results are more relevant to dosimetric considerations than exposure. Biomonitoring is a complex subject worthy of a separate review, and will be considered only briefly here.     

Representing general theoretical concepts in structural equation models: the role of composite variables

Structural equation modeling (SEM) holds the promise of providing natural scientists the capacity to evaluate complex multivariate hypotheses about ecological systems. Building on its predecessors, path analysis and factor analysis, SEM allows for the incorporation of both observed and unobserved (latent) variables into theoretically-based probabilistic models. In this paper we discuss the interface between theory and data in SEM and the use of an additional variable type, the composite. In simple terms, composite variables specify the influences of collections of other variables and can be helpful in modeling heterogeneous concepts of the sort commonly of interest to ecologists. While long recognized as a potentially important element of SEM, composite variables have received very limited use, in part because of a lack of theoretical consideration, but also because of difficulties that arise in parameter estimation when using conventional solution procedures. In this paper we present a framework for discussing composites and demonstrate how the use of partially-reduced-form models can help to overcome some of the parameter estimation and evaluation problems associated with models containing composites. Diagnostic procedures for evaluating the most appropriate and effective use of composites are illustrated with an example from the ecological literature. It is argued that an ability to incorporate composite variables into structural equation models may be particularly valuable in the study of natural systems, where concepts are frequently multifaceted and the influence of suites of variables are often of interest.     

Preimplantation genetic diagnostic protocols for α- and β-thalassaemias using multiplex fluorescent PCR

Haemoglobinopathies including α- and β-thalassaemia are the world's most common class of single gene disorder. Prenatal diagnosis (PND) for β-thalassaemia has been proven to be an effective strategy for controlling the incidence of new cases and is widely used in several countries where the disease is common. Successful preimplantation genetic diagnosis (PGD) protocols for β-thalassaemia have been introduced using restriction fragment length polymorphism (RFLP), single-stranded conformation polymorphism (SSCP) and denaturing gradient gel electrophoresis (DGGE). However, contamination and allele dropout (ADO) remain an important concern for all of these strategies. In the present study two PGD protocols for detecting β-thalassaemia mutations (codon 41-42 and IVSI-110) and one for α-thalassaemia (SEA mutation) have been designed and tested. These methods contain failsafe mechanisms to reduce the risk of misdiagnosis due to ADO or contamination and utilise multiplex fluorescent PCR (F-PCR). Interestingly, amplification efficiency and ADO were significantly affected by the choice of DNA polymerase and the freshness of the single cells used. The close similarity between the DNA sequences of β-globin and δ-globin was also found to be an important issue that necessitated careful design of primers for the β-globin gene. Copyright © 2001 John Wiley & Sons, Ltd.     

First application of preimplantation genetic diagnosis to neurofibromatosis type 2 (NF2)

Neurofibromatosis type 2 (NF2) is a dominantly inherited cancer predisposition syndrome that is caused bymutations in the NF2 gene. We report here the first clinical preimplantation genetic diagnosis (PGD) forNF2. A protocol was developed to simultaneously amplify the mutation and a single nucleotide polymorphism (SNP) located within the gene. The mutation and polymorphism were analysed by simultaneous fluorescent single-strand conformation polymorphism (SSCP) on an automated DNA sequencer. The mutation, carried by the male partner, was a single base pair substitution affecting a splice site in intron 4 of the gene. The female partner was infertile due to polycystic ovary syndrome and would require IVF to conceive. The couple was found to be informative at a linked intragenic SNP situated in the 5′ untranslated region of the gene. The SNP was included in the assay to reduce the risk of misdiagnosis due to allele dropout (ADO). The couple underwent three cycles of treatment during which a total of 43 blastomeres were biopsied from 31 embryos. Amplification at both loci was obtained in 35 cells (81%). A total of five embryos were transferred, two in the first cycle, two in the second and one in the third. No pregnancy ensued. The results of the diagnoses indicated that, in this couple, the inheritance of the mutation may be non-Mendelian. Out of a total of 32 embryos tested only four were found not to carry the mutation. The reasons for this apparent skew remain unknown. Copyright © 2002 John Wiley & Sons, Ltd.     

Turning rhetoric into practice: Integrating tqm into plant operations

Often a management theory fails in practice not because the theory is without merit, but because it was improperly applied. The integration of TQM into plant operations can be accomplished through a four-step circular process: (1) analysis and identification, (2) design, (3) implementation, and (4) evaluation and adjustment. The author outlines these steps in detail and discusses some practical parameters that should be considered before embarking on a TQM program, including the current management philosophy, plant size, and time management.