Application of anaerobic and aerobic activated sludge to phosphorus-deficient wastewater treatment.

Anaerobic and aerobic (AnA) and completely aerobic (CA) sequencing-batch reactors (SBRs) were used to investigate the suitability of the AnA process for treating phosphorus (P)-deficient wastewaters with highly variable influent chemical oxygen demand (COD) loading. Both SBRs were subjected to influent COD loading patterns (LPs) that simulated (1) daily COD loading fluctuations, (2) weekend shutdowns, and (3) long weekend or holiday shutdowns. During LP 1, the AnA SBR produced lower average effluent soluble phosphorus concentrations than CA SBR (0.4 vs. 1.0 mgP/L). A similar result was observed during LP 2, but effluent acetate was detected after the first high COD loading cycle of the weekday loading period. During LP 3, the volatile suspended solids content of both reactors dropped sharply, and the effluent quality of both SBRs deteriorated. Model predictions suggest that the AnA process is stable when treating LP 1, but eventually fails when treating LP 2.     

Spatial and temporal variations of PM(2.5) concentration and composition throughout an urban area with high freeway density-the Greater Cincinnati study

The PM(2.5) concentration and its elemental composition were measured in the Cincinnati metropolitan area, which is characterized by intense highway traffic. The spatial and temporal variations were investigated for various chemical elements that contributed to the PM(2.5) fraction during a 1-year-long measurement campaign (December 2001-November 2002). The ambient aerosol monitoring was performed in 11 locations around the city during nine measurement cycles. During each cycle, four Harvard-type impactors were operating in parallel in specific locations to explore various factors affecting the PM(2.5) elemental concentrations. The sampling was performed during business days, thus assuring traffic uniformity. The 24-h PM(2.5) samples were collected on Teflon and quartz filters. Teflon filters were analyzed by X-ray fluorescence (XRF) analysis while quartz filters were analyzed by thermal-optical transmittance (TOT) analysis. In addition to PM(2.5) measurements, particle size-selective sampling was performed in two cycles using micro-orifice uniform deposit impactor; the collected fractionated deposits were analyzed by XRF. It was found that PM(2.5) concentration ranged from 6.70 to 48.3 mug m(-3) and had low spatial variation (median coefficient of variation, CV=11.3%). The elemental concentrations demonstrated high spatial variation, with the median CV ranged from 38.2% for Fe to 68.7% for Ni. For traffic-related trace metals, the highest concentration was detected in the city center site, which was close to a major highway. The particle size selective measurement revealed that mass concentration of the trace metals, such as Zn, Pb, Ni, as well as that of sulfur reach their peak values in the particle size range of 0.32-1.0 mum. Meteorological parameters and traffic intensity were not found to have a significant influence on the PM(2.5) elemental concentrations.     

Phylogenetic relationships within the class holothuroidea,inferred from 18S rRNA gene data

This molecular phylogenetic analysis of 18S ribosomal RNA (18SrDNA) gene sequences from 16 species of holothuroid, suggests strong support for an alternative taxonomic scheme to replace the existing classification. When trees drawn from the 18S rDNA data were constrained to show expected relationships between the holothourid orders, they were significantly worse than the best tree under SH tests. These analyses indicated strongly that the subclass Aspidochirotacea is paraphyletic. Sequences from the order Dendrochirotida grouped with aspidochiroitid sequences, with high bootstrap support, to the exclusion of the elasipod sequence. In line with recent morphological studies the order Apodida were a basal sister group to the other three holothuroid orders examined and the Dendrochirotida was a derived holothuroid order. Brendan F. Keegan, Richard Powell: R.I.P     

Chorionic villus sampling for prenatal diagnosis in wales using DNA probes—5 years' experience

Chorionic villi were sampled from 125 women who requested prenatal diagnosis, either for genetic disorders or because of advanced maternal age. Of these, 105 samples were obtained by the transcervical route and 20 were obtained by the transabdominal approach. The sampling success rate was 97 per cent (122/125). The mean maternal age of the patients was 31 years (range 17–44) and the mean gestational age at which the chorionic villus sampling was performed was 10 weeks (range 7–13 weeks). Seventy-four of these diagnoses involved the use of DNA markers. The minimal size of the sample used for DNA diagnosis was 5 mg. Maternal contamination was detected in two samples. A diagnosis was provided on all but two samples. The fetal loss rate was high initially but fell to 1·9 per cent in 1988.     

Mosaicism of autosomes and sex chromosomes in morphologically normal,monospermic preimplantation human embryos

We have previously detected chromosome abnormalities in human embryos whilst identifying the sex for preimplantation diagnosis of X-linked disease. In this study we assess the incidence of these abnormalities, both for sex chromosomes and autosomes 1 and 17, using dual fluorescent in situ hybridization (FISH). Sixty-nine normally fertilized embryos of good morphology at the 6–10 cell stage (day 3 post-insemination) were examined. The embryos were spread whole using HCl and Tween 20 to dissolve the cytoplasm. Thirty-four embryos were analysed for the sex chromosomes and 35 for autosomes 1 and 17. All probes were directly labelled with fluorochromes allowing analysis in 2 h. Control lymphocytes demonstrated that the probes were of high specificity. For the sex chromosomes, five embryos were mosaic (15 per cent) with the remaining 29 being uniformly XX or XY. In no case was an XX nucleus found in an otherwise XY embryo, indicating that even though mosaicism for the sex chromosomes is present, such abnormalities would not lead to a misdiagnosis of sex. For the autosomes, 16 embryos were abnormal (46 per cent); one embryo was triploid, one was monosomic for chromosome 1, and ten others were diploid mosaics (three diploid/aneuploid, three diploid/polyploid, and four diploid/haploid). A further four embryos had variable chromosome numbers in the majority of nuclei which appeared to be the result of uncontrolled mitotic division. The presence of haploidy or double monosomy, which occurred in 15 per cent of nuclei, has important implications for the diagnosis of trisomies and dominant disorders.     

Greening Nigeria's economy for industrial and environmental sustainability: Polyurethane production as a test case

The study focused on Nigeria's polyurethane (PU) production process as a test case. Though it is currently insignificant when viewed from a global perspective, PU production in Nigeria is not eco‐friendly. Traditionally, PU is produced by reacting petro‐based polyol with a poly‐isocyanate, which is made from amines and phosgene and are currently imported into the country. These two materials are detrimental to the human health and environment, indicating that Nigeria's PU industries need to re‐examine their production inputs for environmental compliance. The objective of this study is to review the PU industry for nontoxic reagents that could be sourced locally vis‐à‐vis overcoming sustainable development (greening the economy) challenges in Nigeria. Non‐isocyanate polyurethane (NIPU) is preferred to petro‐polyurethane because, in comparison, NIPU has improved thermal and chemical resistance, porosity and water absorption, and is less toxic. Engaging local resources to produce PU is economically feasible; in addition, NIPU is relatively advantageous to human health and the environment. Aside from being economically feasible, production of NIPU in Nigeria has the propensity to greatly enlarge the growth of the existing PU industry to tremendous heights and contribute to diversifying and improving the overall economy.     

Drought can offset potential water use efficiency of forest ecosystems from rising atmospheric CO2

Increasing atmospheric CO₂ is both leading to climate change and providing a potential fertilisation effect on plant growth. However, southern Australia has also experienced a significant decline in rainfall over the last 30 years, resulting in increased vegetative water stress. To better understand the dynamics and responses of Australian forest ecosystems to drought and elevated CO₂, the magnitude and trend in water use efficiency (WUE) of forests, and their response to drought and elevated CO₂ from 1982 to 2014 were analysed, using the best available model estimates constrained by observed fluxes from simulations with fixed and time-varying CO₂. The ratio of gross primary productivity (GPP) to evapotranspiration (ET) (WUEe) was used to identify the ecosystem scale WUE, while the ratio of GPP to transpiration (Tr) (WUEc) was used as a measure of canopy scale WUE. WUE increased significantly in northern Australia (p < 0.001) for woody savannas (WSA), whereas there was a slight decline in the WUE of evergreen broadleaf forests (EBF) in the southeast and southwest of Australia. The lag of WUEc to drought was consistent and relatively short and stable between biomes (≤3 months), but notably varied for WUEe, with a long time-lag (mean of 10 months). The dissimilar responses of WUEe and WUEc to climate change for different geographical areas result from the different proportion of Tr in ET. CO₂ fertilization and a wetter climate enhanced WUE in northern Australia, whereas drought offset the CO₂ fertilization effect in southern Australia.     

A multi-criteria approach to screening alternatives for converting sewage sludge to biodiesel

The search for cheaper feedstock for use in the production of biofuels such as biodiesel has turned attention to various forms of waste products including animal fats, waste oils and now lipids in sludge. With the potential of obtaining sludge at a reduced cost, free, or possibly with incentives, sewage sludge is being investigated as a potential feedstock for biofuel production. For the extraction of oils from the sewage sludge and the subsequent processing, there are various alternatives that should be designed, analyzed, and screened. In developing and screening these alternatives, it is necessary to have a consistent basis for comparing alternatives based on key criteria. While most of the design studies focus on techno-economic criteria, it is also important to include safety metrics in the multi-criteria analysis. In this work, a detailed economic analysis and a safety evaluation are performed on a process involving extraction of triglycerides and fatty acids, pre-treatment of fatty acids (direct conversion to biodiesel), and transesterification of triglycerides to biodiesel. Four solvents, toluene, hexane, methanol and ethanol, are individually used in the extraction process. The resulting triglycerides and fatty acids from each extraction are modeled in the pre-treatment process. ASPEN Plus software is used to simulate the detailed process. Economic analysis is performed using ASPEN ICARUS, and scale-up of a previously analyzed process is used to estimate the cost of the biodiesel portion of the process. A new safety metric (referred to as the Safety Index “SI”) is introduced to enable comparison of the various solvent extraction processes. The SI is based on solvent criteria as well as process conditions. A case study is presented to demonstrate the insights and usefulness of the developed approach. The results of the techno-economic analysis reveal that of the four solvents used for the initial extraction, hexane and toluene were least costly (2.89 and 2.79 $/gal, respectively). Conversely, the safety analysis utilizing the SI reveals that methanol and ethanol are the safer solvent options. The issue of cost/safety tradeoffs is also discussed.     

Quantifying species recovery and conservation success to develop an IUCN Green List of Species

Stopping declines in biodiversity is critically important, but it is only a first step toward achieving more ambitious conservation goals. The absence of an objective and practical definition of species recovery that is applicable across taxonomic groups leads to inconsistent targets in recovery plans and frustrates reporting and maximization of conservation impact. We devised a framework for comprehensively assessing species recovery and conservation success. We propose a definition of a fully recovered species that emphasizes viability, ecological functionality, and representation; and use counterfactual approaches to quantify degree of recovery. This allowed us to calculate a set of 4 conservation metrics that demonstrate impacts of conservation efforts to date (conservation legacy); identify dependence of a species on conservation actions (conservation dependence); quantify expected gains resulting from conservation action in the medium term (conservation gain); and specify requirements to achieve maximum plausible recovery over the long term (recovery potential). These metrics can incentivize the establishment and achievement of ambitious conservation targets. We illustrate their use by applying the framework to a vertebrate, an invertebrate, and a woody and an herbaceous plant. Our approach is a preliminary framework for an International Union for Conservation of Nature (IUCN) Green List of Species, which was mandated by a resolution of IUCN members in 2012. Although there are several challenges in applying our proposed framework to a wide range of species, we believe its further development, implementation, and integration with the IUCN Red List of Threatened Species will help catalyze a positive and ambitious vision for conservation that will drive sustained conservation action.     

Metrics of progress in the understanding and management of threats to Australian birds

Although evidence-based approaches have become commonplace for determining the success of conservation measures for the management of threatened taxa, there are no standard metrics for assessing progress in research or management. We developed 5 metrics to meet this need for threatened taxa and to quantify the need for further action and effective alleviation of threats. These metrics (research need, research achievement, management need, management achievement, and percent threat reduction) can be aggregated to examine trends for an individual taxon or for threats across multiple taxa. We tested the utility of these metrics by applying them to Australian threatened birds, which appears to be the first time that progress in research and management of threats has been assessed for all threatened taxa in a faunal group at a continental scale. Some research has been conducted on nearly three-quarters of known threats to taxa, and there is a clear understanding of how to alleviate nearly half of the threats with the highest impact. Some management has been attempted on nearly half the threats. Management outcomes ranged from successful trials to complete mitigation of the threat, including for one-third of high-impact threats. Progress in both research and management tended to be greater for taxa that were monitored or occurred on oceanic islands. Predation by cats had the highest potential threat score. However, there has been some success reducing the impact of cat predation, so climate change (particularly drought), now poses the greatest threat to Australian threatened birds. Our results demonstrate the potential for the proposed metrics to encapsulate the major trends in research and management of both threats and threatened taxa and provide a basis for international comparisons of evidence-based conservation science.