Removal of SO2 from O2-containing flue gas by activated carbon fiber (ACF) impregnated with NH3

Adsorption of SO(2) from the O(2)-containing flue gas by granular activated carbons (GACs) and activated carbon fibers (ACFs) impregnated with NH(3) was studied in this technical note. Experimental results showed that the ACFs were high-quality adsorbents due to their unique textural properties. In the presence of moisture, the desulphurization efficiency for the ACFs was improved significantly due to the formation of sulfuric acid. After NH(3) impregnation of ACF samples, nitrogen-containing functional groups (pyridyl C(5)H(4)N- and pyrrolyl C(4)H(4)N-) were detected on the sample surface by using an X-ray photoelectron spectrometer. These functional groups accounted for the enhanced SO(2) adsorption via chemisorption and/or catalytic oxidization.     

Cu and Zn adsorption onto non-residual and residual components in the natural surface coatings samples (NSCSs) in the Songhua River, China

Natural surface coatings samples (NSCSs) from the surface of river shingles were employed to investigate the roles of non-residual and residual components of the NSCSs in controlling Cu and Zn adsorption via the selective extraction techniques and statistical analysis. The results indicate that the greatest contribution to metals adsorption on a molar basis was from Mn oxides in the non-residual fraction. Metals adsorption capacities of Mn oxides exceeded those of Fe oxides by one order of magnitude, fewer roles were found attributing to adsorption by organic materials (OM), and the estimated contribution of the residual fraction to metals adsorption was insignificant. These results implied that Mn oxides were the most important component in controlling heavy metals in aquatic environments. Experiments with Cu and Zn adsorption measured together showed that Cu severely interfered with Zn adsorption to the NSCSs and vice versa under the conditions of the two coexisted ions adsorption.     

以pH和ORP作为脉冲SBR工艺的实时控制参数

为了实现脉冲SBR深度脱氮的实时控制,以某污水处理厂市政污水为处理对象,考察了脉冲SBR在深度脱氮过程中pH及ORP的变化规律.试验结果表明,pH及ORP的变化规律与脉冲SBR有机物去除、硝化与反硝化过程存在较好的相关关系.可以根据pH和ORP变化曲线上的特征点对脉冲SBR进行实时控制.并考察了污水C/N(COD/NH4 -N)对pH及ORP的变化规律的影响.在硝化过程中,C/N对pH及ORP曲线变化点的出现没有影响;在反硝化过程中,应结合pH值"硝酸盐峰"和ORP"硝酸盐膝"来判断低C/N污水反硝化的终点.在该试验中,出水TN低于2 mg/L,TN去除率可达到96%以上.     

A sensitive monoclonal antibody-based enzyme-linked immunosorbent assay for chlorpyrifos residue determination in Chinese agricultural samples

A monoclonal antibody-based competitive antibody-coated enzyme-linked immunosorbent assay (ELISA) was developed and optimized for determining chlorpyrifos residue in agricultural products. The IC₅₀ and IC₁₀ of this ELISA were 3.3 ng/mL and 0.1 ng/mL respectively. The average recoveries in six agricultural products were between 79.5% and 118.0%, with the intra-assay coefficient of variation being less than 8 %. The limit of detection for all tested products was 30 ng/g. To the best of our knowledge, this assay has the best specificity among all the published research on ELISAs for chlorpyrifos.     

空心壳聚糖微球对二甲酚橙的吸附性能研究

以生物可降解的壳聚糖为原料,采用反相悬浮交联法制备了具有空壳结构的壳聚糖微球,通过控制反应条件得到单分散性的微米级微球.通过分光光度法探讨了溶液初始pH、吸附时间、二甲酚橙初始浓度、壳聚糖微球用量及其直径对壳聚糖微球吸附二甲酚橙的影响.结果表明,常温下壳聚糖微球对二甲酚橙的最佳吸附条件为:溶液初始pH为5,吸附时间为2.0 h,二甲酚橙初始质量浓度为32 mg/L,壳聚糖微球用量为0.3 g/L(以每升二甲酚橙溶液计),壳聚糖微球直径为74 靘;在此最佳吸附条件下,采用分光光度法对二甲酚橙模拟废水进行测定,相应的回收率误差均在-1%～1%.     

Distribution and variation of mercury in frozen soils of a high-altitude permafrost region on the northeastern margin of the Tibetan Plateau

Environmental Science and Pollution Research - The Tibetan Plateau (TP) is home to the largest permafrost bodies at low- and mid-latitudes, yet little is known about the distribution and variation...     

Energy-Saving Effect Calculation and Implementation Strategy Study on the Industrial Structure Adjustment in Western China

The western region is an important strategic base of energy in China. The average per capita possession of fossil energy in the west is twice that in China. On the basis of the analysis of the mechanism how industrial structure adjustment affects energy consumption per unit of gross domestic product (GDP), the energy input-output table of western China was designed and compiled. Combining multiobjective planning techniques, setting energy-saving, economic growth, and laborer's income growth as the goals, setting basic input-output relations, production capacity, and labor as the constraints, the multiobjective optimization model of western energy input-output was constructed. The results of industrial structure optimization of western China show that: with technology and product price remaining unchanged, the adjustment of the industrial structure can reduce energy consumption per unit GDP by 2.7%, at the same time ensuring the average annual increase of GDP and laborer's income of western region in excess of 8%. It indicates that industrial structure adjustment is an effective method in accomplishing the aim of energy saving. Finally, policy suggestions from four angles, such as industrial chain and financial policies, were put forward.     

Innovative cleaner production for steel phosphorization using Zn–Mn phosphating solution

Phosphating prior to coating for steel is usually needed. In this paper, an innovative cleaner production has been developed for steel surface treatment using Zn–Mn phosphating solution in which there was no nitrite. The mass of the Zn–Mn layer deposited in this new process was about 1.1 g m^?2 when the temperature ranged from 3 to 35 °C. The corrosion time for the color phosphating layer in the copper sulfate spot test was in the range of 72–145 s. Adhesion test showed that the coating layers achieved a higher adhesion load than those produced by conventional methods. Washing using water was not necessary in this cleaner phosphorization, which usually follows phosphorization in traditional processes of steel phosphorization. Consequently, wastewater discharge was reduced greatly.