芹菜赖氨酸加苏氨酸抗性细胞系的选择

用４ｍｍｏｌ－／Ｌ浓度的赖氨酸加苏氨酸作为选择压，经相同浓度液体和固体选择培养基连续选择，从未经诱变处理的芹菜胚性愈伤组织筛选出一个稳定的赖氨酸加苏氨酸抗性细胞系并得到再生植株。抗性细胞系再生植株整株的氨基酸含量比对照组植株高１０倍左右。但是地上部分氨基酸含量，抗性细胞系再生植株比对照植株有所降低。两种植株叶片的细胞色素氧化酶同工酶谱有明显差异，抗性细胞系再生植株有４条谱带，而对照植株只有两条谱带     

Efficient production of hydrogen peroxide in microbial reverse-electrodialysis cells coupled with thermolytic solutions

● Appreciable H₂O₂ production rate was achieved in MRCs utilizing NH₄HCO₃ solutions. ● Carbon black outperformed activated carbon as the catalyst for H₂O₂ production. ● The optimum carbon black loading for H₂O₂ production on air-cathode was 10 mg/cm². ● The optimum number of cell pairs was determined to be three. ● A maximum power density of 980 mW/m² was produced by MRCs with 5 cell pairs. H₂O₂ was produced at an appreciable rate in microbial reverse-electrodialysis cells (MRCs) coupled with thermolytic solutions, which can simultaneously capture waste heat as electrical energy. To determine the optimal cathode and membrane stack configurations for H₂O₂ production, different catalysts, catalyst loadings and numbers of membrane cell pairs were tested. Carbon black (CB) outperformed activated carbon (AC) for H₂O₂ production, although AC showed higher catalytic activity for oxygen reduction. The optimum CB loading was 10 mg/cm² in terms of both the H₂O₂ production rate and power production. The optimum number of cell pairs was determined to be three based on a tradeoff between H₂O₂ production and capital costs. A H₂O₂ production rate as high as 0.99 ± 0.10 mmol/(L·h) was achieved with 10 mg/cm² CB loading and 3 cell pairs, where the H₂O₂ recovery efficiency was 52 ± 2% and the maximum power density was 780 ± 37 mW/m². Increasing the number of cell pairs to five resulted in an increase in maximum power density (980 ± 21 mW/m²) but showed limited effects on H₂O₂ production. These results indicated that MRCs can be an efficient method for sustainable H₂O₂ production.     

顺丁烯二酸酐生产的环境友好技术

以正丁烷选择性氧化制顺丁烯二酸酐为例，按照氧化还原进行的烃类选择性氧化反应，采用将催化循环的不同步骤在空间或时间上分离的操作方法，可大幅度地提高反应的选择性，实现环境友好生产。重点介绍了循环流化床、人为非定固定床和膜反应器这3种新反应技术在顺丁烯二酸酐生产中的应用。     

我国各省市报废汽车量预测

根据统计数据,采用加权平均法计算我国汽车平均使用年限为12年;根据各省市1998—2008年汽车新增消费量统计数据,推测得到2010—2020年各省市汽车报废量;分析了报废汽车中载货车、客车和轿车结构特征和报废汽车东、中、西部区域分布特征。     

台湾海峡区域防灾减灾信息服务系统研究

台湾海峡及其周边海域是我国海洋灾害发生的重点区域,充分利用我国在该区域投入巨资构建的海洋动力环境实时立体监测系统所获取的海洋动力参数数据,构建区域性防灾减灾信息服务系统具有重要的意义.从台湾海峡海洋动力环境立体监测数据防灾减灾应用和网络服务角度出发,提出了防灾减灾信息服务的数据服务、信息服务和决策服务等3个层次的划分方法,研究了基于数据仓库、XML、中间件和基于地球球体模型的三维可视化等的服务技术实现策略.提出的防灾减灾信息服务系统构建技术充分考虑了不间用户的应用需求,并通过工程化实践提升了我国海洋动力环境立体监测信息的广泛共享和深度应用的层次.     

近25年三峡库区土地覆被变化及驱动力分析

基于1990、2000、2005、2010和2015年五期30 m空间分辨率土地覆被遥感数据,利用动态度模型和转移矩阵,综合分析了近25 a三峡库区土地覆被的时空格局、变化特征及驱动力。研究结果表明：2015年三峡库区土地覆被以森林和耕地为主,分别占总面积的41.45%和24.58%;1990~2015年三峡库区人工表面、湿地、森林和其他用地的面积增长明显,耕地、灌丛和草地的面积整体减少,区域综合土地覆被动态度呈先增加后稳定的变化趋势,人工表面是最为活跃的土地覆被类型,其次是湿地和耕地;前10 a三峡库区人工表面占用耕地较为突出,后15 a土地覆被类型转换主要为森林、灌丛和耕地转为人工表面和湿地;三峡工程建设、移民安置与迁建、经济发展与城镇化导致人工表面不断扩张,水库蓄水导致湿地面积迅速增加,农业结构调整促使园地面积扩张。三峡库区近25 a来,在退耕还林等生态保护政策影响下,生态环境状况趋于改善,库区森林面积显著增加,坡耕地面积持续减少,但人地矛盾日益突出,研究结果可为后三峡时代库区生态环境保护与社会经济的协调发展提供数据支撑。     

Transfer of metals from soil to vegetables in an area near a smelter in Nanning, China

A field survey was conducted to investigate the metal contamination in soils and vegetables, and to evaluate the possible health risks to local population through foodchain transfer near a smelter in Nanning, southern China. Contamination levels in soils and vegetables with cadmium (Cd), lead (Pb), zinc (Zn) and copper (Cu) were measured, and transfer factors (TF) from soils to vegetable plants and its health risk (risk index, RI) were calculated accordingly. Results showed that both soils and vegetables from villages 1 and 2 (V1 and V2, 1500 m and 500 m from the smelter) were heavily contaminated, compared to a village 50 km from the smelter. Geometric mean of Cd and Pb concentrations in vegetables for V1 and V2, respectively, were 0.15 and 0.24 mg Cd kg(-1) and 0.45 and 0.38 mg Pb kg(-1) (on fresh weight basis). Oral intake of Cd and Pb through vegetables poses high health risk to local residents. Risk indices for V1 and V2, respectively, were 3.87 and 7.42 for Cd, and 1.44 and 13.5 for Pb. The complexity of metal contamination and their health risks are also discussed.     

软土场地路堤-加筋碎石桩复合地基工作状态分析

软土场地碎石桩因具备桩体侧向变形大、超孔隙水压力消散慢的问题,导致出现基础沉降大、土体固结排水速度慢等工程病害。路堤下采用加筋碎石桩复合地基是处理软土场地的主流方法。本文采用二维有限元方法,建立考虑路堤填筑过程的软土场地路堤-加筋碎石桩复合地基数值模型,探讨了加筋碎石桩复合地基承载力的影响因素。基于达西定律和比奥固结理论,分析高地下水位场地条件下加筋体刚度和桩数对加筋碎石桩复合地基工作状态的影响规律。研究表明:增大褥垫层厚度和减小褥垫层模量均能够提高桩土应力比,改善桩顶应力集中的问题。与传统碎石桩相比,高地下水位条件下加筋碎石桩复合地基中超孔隙水压力消散速率快,桩数增加可以有效提高复合地基排水速率。     

城市轨道交通地下线引起的环境振动影响因素研究

随着城市的发展,轨道交通在各大城市中得到迅速发展,但与之相伴的环境振动问题也日益突显.为研究城市轨道交通地下线列车运行速度、线路条件、减振措施等运营条件对环境振动影响,在某地铁线路隧道内进行了环境振动源强测试.结果表明,隧道壁源强位置处Z振级随着速度的增加而增大,列车通过速度在57～75 km/h变化时,列车速度每增加...     

足底压力测量技术在鞋靴设计中的应用及进展

足底压力测量技术是用来研究穿鞋状态下足-鞋界面压力分布的必要手段,对生物力学和临床医学等的相关理论和技术都有着重要的作用,也为指导人们健康穿鞋与科学制鞋带来了科学理论依据。本文概要地介绍足底压力测量技术发展历史及其在鞋靴设计领域中的应用方向。