Biological remediation of explosives and related nitroaromatic compounds

Nitroaromatics form an important group of recalcitrant xenobiotics. Only few aromatic compounds, bearing one nitro group as a substituent of the aromatic ring, are produced as secondary metabolites by microorganisms. The majority of nitroaromatic compounds in the biosphere are industrial chemicals such as explosives, dyes, polyurethane foams, herbicides, insecticides and solvents. These compounds are generally recalcitrant to biological treatment and remain in the biosphere, where they constitute a source of pollution due to both toxic and mutagenic effects on humans, fish, algae and microorganisms. However, relatively few microorganisms have been described as being able to use nitroaromatic compounds as nitrogen and/or carbon and energy source. The best-known nitroaromatic compound is the explosive TNT (2,4,6-trinitrotoluene). This article reviews the bioremediation strategies for TNT-contaminated soil and water. It comes to the following conclusion: The optimal remediation strategy for nitroaromatic compounds depends on many site-specific factors. Composting and the use of reactor systems lend themselves to treating soils contaminated with high levels of explosives (e.g. at former ammunition production facilities, where areas with a high contamination level are common). Compared to composting systems, bioreactors have the major advantage of a short treatment time, but the disadvantage of being more labour intensive and more expensive. Studies indicate that biological treatment systems, which are based on the activity of the fungus Phanerochaete chrysosporium or on Pseudomonas sp. ST53, might be used as effective methods for the remediation of highly contaminated soil and water. Phytoremediation, although not widely used now, has the potential to become an important strategy for the remediation of soil and water contaminated with explosives. It is best suited where contaminant levels are low (e.g. at military sites where pollution is rather diffuse) and where larger contaminated surfaces or volumes have to be treated. In addition, phytoremediation can be used as a polishing method after other remediation treatments, such as composting or bioslurry, have taken place. This in-situ treatment method has the advantage of lower treatment costs, but has the disadvantage of a considerable longer treatment time. In order to improve the cost-efficiency, phytoremediation of nitroaromatics (and other organic xenobiotics) could be combined with bio-energy production. This requires, however, detailed knowledge on the fate of the contaminants in the plants as well as the development of efficient treatment methods for the contaminated biomass that minimise the spreading of the contaminants into the environment during post harvest treatment.     

Magnetic anomalies of forest soils in the Upper Silesia-Northern Moravia region

Previous investigations revealed a strong magnetic anomaly due to soil magnetic enhancement in the industrialized cross-border area of Upper Silesia (Poland) and Northern Moravia (Czech Republic). Since industrial and urban dusts contain magnetic particles, this soil magnetic enhancement is assumed to be of anthropogenic origin, caused by a high concentration of atmospherically deposited magnetic particles, accumulated in topsoil layers. This assumption is proved by investigations of vertical profiles of magnetic susceptibility along a transect crossing the border area of the two countries. The results show that the population of magnetic minerals in the organic horizon is different from that in the mineral horizons. The vertical distribution of magnetic susceptibility and thermomagnetic analysis suggests negligible lithogenic contribution. The observed relationship between magnetic susceptibility and some heavy metals, confirmed by micromorphological observations and microchemical analysis of magnetic particles separated from the organic horizons of forest topsoil, has proved the usefulness of soil magnetometry for pollution study.     

Contrasting lead speciation in forest and tilled soils heavily polluted by lead metallurgy

The concentration trends and chemical fractionation of Pb was studied in eight tilled and forest soil profiles heavily polluted by Pb metallurgy in the Pribram district, Czech Republic. The highest Pb concentrations were observed in surface and subsurface horizons attaining 35,300 mg kg-1 in forest soils and 1233 mg kg-1 in tilled soils. Total Pb concentrations were one order of magnitude lower in tilled soil due to intensive ploughing and annual crop off-take. The results of the Tessier sequential extraction procedure showed the preferential binding of Pb in forest soils to operationally-defined exchangeable positions and soil organic matter (oxidisable fraction). The Pb exchangeable fraction is thought to correspond to weak electrostatic binding on the functional groups of organic matter. In tilled soil, Pb is predominantly bound to operationally-defined Fe and Mn oxides (reducible fraction). A comparison with the background Pb concentration values showed a strong contamination even in mineral horizons IIC and confirmed a strong vertical mobility of Pb within the soil profiles. The calculated mobility factors (MF) showed that up to 72% of Pb is mobile and bioavailable in forest soils. In contrast, the bioavailability of Pb in tilled soils was significantly lower as the MF accounted for up to 30%. In the most polluted horizon of forest soil profile, the X-ray powder diffraction (XRPD) analysis confirmed the presence of anglesite (PbSO4), derived likely from the smelter emissions.     

Involvement of siderophores in the reduction of metal-induced inhibition of auxin synthesis in Streptomyces spp

Unlike synthetic metal chelators, microbe-assisted phytoremediation provides plants with natural metal-solubilizing chelators which do not constitute a potential source of environmental pollution. Concurrently with microbial chelators, plant growth promotion can be enhanced through bacterially-produced phytohormones. In this work, the simultaneous production of siderophores and auxins by Streptomyces was studied to gain insight for future application in plant growth and phytoremediation in a metal-contaminated soil. Standard auxin and siderophore detection assays indicated that all of the investigated Streptomyces strains can produce these metabolites simultaneously. However, Al(3+), Cd(2+), Cu(2+), Fe(3+) and Ni(2+), or a combination of Fe(3+) and Cd(2+), and Fe(3+) and Ni(2+) affected auxin production negatively, as revealed by spectrophotometry and gas chromatography-mass spectrometry. This effect was more dramatic in a siderophore-deficient mutant. In contrast, except for Fe, all the metals stimulated siderophore production. Mass spectrometry showed that siderophore and auxin-containing supernatants from a representative Streptomyces species contain three different hydroxamate siderophores, revealing the individual binding responses of these siderophores to Cd(2+) and Ni(2+), and thus, showing their auxin-stimulating effects. We conclude that siderophores promote auxin synthesis in the presence of Al(3+), Cd(2+), Cu(2+) and Ni(2+) by chelating these metals. Chelation makes the metals less able to inhibit the synthesis of auxins, and potentially increases the plant growth-promoting effects of auxins, which in turn enhances the phytoremediation potential of plants.     

Behaviour of arsenic in forested catchments following a high-pollution period

Due to high availability of adsorption sites, forested catchments could be net sinks for pollutant arsenic both during the period of increasing and decreasing pollution. We tested this hypothesis along a north-south pollution gradient in spruce die-back affected areas of Central Europe. For two water years (2007-2008), we monitored As fluxes via spruce-canopy throughfall, open-area precipitation, and runoff in four headwater catchments (Czech Republic). Since 1980, atmospheric As inputs decreased 26 times in the north, and 13 times in the south. Arsenic export by runoff was similar to atmospheric inputs at three sites, resulting in a near-zero As mass balance. One site exhibited a net export of As (2.2 g ha⁻¹ yr⁻¹). In contrast, the preceding period (1995-2006) showed much higher As fluxes, and higher As export. Czech catchments do not serve as net sinks of atmospheric As. A considerable proportion of old industrial arsenic is flushed out of the soil.     

Composition and parameters of household bio-waste in four seasons

Bio-waste makes up almost half portion of municipal solid waste. The characterization of household bio-waste is important in determining the most appropriate treatment method. The differences in composition and parameters of bio-waste derived from urban settlement (U-bio-waste) and family houses (F-bio-waste) during the four climate seasons are described in this paper. Twelve components and 20 parameters for bio-waste were evaluated. The composition of U-bio-waste was almost steady over those seasons, unlike F-bio-waste. U-bio-waste was comprised mainly (58.2%) of fruit and vegetable debris. F-bio-waste was primarily made up of seasonal garden components. The amount of variation among seasons in both type of bio-waste increased in sequence: basic parameters < macro-elements < potentially toxic elements. Spearman’s correlations among proportions of individual components and parameters of bio-waste were found out. Results of this research could be utilized to support another composition and parameters of bio-waste and be suitable for establishing bio-waste processing.     

Changes in cadmium mobility during composting and after soil application

The effect of twelve weeks of composting on the mobility and bioavailability of cadmium in six composts containing sewage sludge, wood chips and grass was studied, along with the cadmium immobilization capacity of compost. Two different soils were used and Cd accumulation measured in above-ground oat biomass (Avena sativa L.). Increasing pH appears to be an important cause of the observed decreases in available cadmium through the composting process. A pot experiment was performed with two different amounts of compost (9.6 and 28.8 g per kg of soil) added into Fluvisol with total Cd 0.255 mg kg^?1, and contaminated Cambisol with total Cd 6.16 mg kg^?1. Decrease of extractable Cd (0.01 mol l^?1 CaCl₂) was found in both soils after compost application. The higher amount of compost immobilized an exchangeable portion of Cd (0.11 mol l^?1 CH₃COOH extractable) in contaminated Cambisol unlike in light Fluvisol. The addition of a low amount of compost decreased the content of Cd in associated above-ground oat biomass grown in both soils, while a high amount of compost decreased the Cd content in oats only in the Cambisol.