Thermal manikin measurements--exact or not?

According to the European prestandard ENV 342:1998, the thermal insulation of cold-protective clothing is measured with a thermal manikin. Systematic studies on the reproducibility of the values, measured with different types of clothing on the commonly used standing and walking manikins, have not been reported in the literature. Over 300 measurements were done in 8 different European laboratories. The reproducibility of the thermal insulation test results was good. The coefficient of variation was lower than 8%. The measured clothing should fit the manikin precisely, because poorly fitting clothing gave an error in the results. The correlation between parallel and serial insulation values was excellent and parallel values were about 20% lower than serial ones. The influence of ambient conditions was critical only in the case of air velocity. The reproducibility of thermal insulation test results in a single laboratory was good, and the variation was lower than 3%.     

Calcium carbonate waste from an integrated pulp and paper mill as a potential liming agent

Calcium carbonate is used in large amounts in the pulp and paper industry as a paper filler. When it is manufactured, the calcium carbonate waste is purged from the process. Here we demonstrate that, due to the elevated calcium concentration of 168.5 g kg⁻¹ dry weight (dw), alkaline pH of 12.6 and neutralizing (liming) effect value of 42.4% expressed as Ca equivalents, this waste is a potential liming agent and a pH buffer. The heavy metal concentrations in the waste were lower than the new Finnish limit values for fertilizers used in agriculture, as well as for a material, e.g. ash, used as an earth construction agent. These limit values came into force in March 2007 and in June 2006, respectively.     

Sedimentation of PCDD/Fs and PCBs in the Gulf of Finland and the Gulf of Bothnia,the Baltic Sea

Sediment trap material was collected during May–December in the period 1996–2008 in three coastal areas and four open sea stations in the Finnish territory of the Baltic Sea. The highest sedimentation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with a typical source-related congener profile from chlorophenol production dominated by highly chlorinated dibenzofurans was found close to a historical source in the Kymijoki estuary. This was an order of magnitude higher than in other river estuaries and two orders of magnitude higher than in the open sea stations. The sedimentation of polychlorinated biphenyls (PCBs) was also higher in river estuaries than in other areas. No significant decrease over a 12 year period of monitoring was found in concentration or in sedimentation in the Kymijoki estuary. In the western Gulf of Finland, the Archipelago Sea and the Gulf of Bothnia, the dominating congeners, calculated as toxic equivalent (TEQ) in sedimentation were 1, 2, 3, 7, 8-PeCDD and 2, 3, 4, 7, 8-PeCDF, often reported as the main congeners in deposition.     

Forecasting Air Quality Parameters Using Hybrid Neural Network Modelling

Urban air pollution has emerged as an acute problem in recent years because of its detrimental effects on health and living conditions. The research presented here aims at attaining a better understanding of phenomena associated with atmospheric pollution, and in particular with aerosol particles. The specific goal was to develop a form of air quality modelling which can forecast urban air quality for the next day using airborne pollutant, meteorological and timing variables.Hourly airborne pollutant and meteorological averages collected during the years 1995–1997 were analysed in order to identify air quality episodes having typical and the most probable combinations of air pollutant and meteorological variables. This modelling was done using the Self-Organising Map (SOM) algorithm, Sammon's mapping and fuzzy distance metrics. The clusters of data that were found were characterised by statistics. Several overlapping Multi-Layer Perceptron (MLP) models were then applied to the clustered data, each of which represented one pollution episode. The actual levels for individual pollutants could then be calculated using a combination of the MLP models which were appropriate in that situation.The analysis phase of the modelling gave clear and intuitive results regarding air quality in the area where the data had been collected. The resulting forecast showed that the modelling of gaseous pollutants is more reliable than that of the particles.     

A synthesis of the impacts of ditch network maintenance on the quantity and quality of runoff from drained boreal peatland forests

Drained peatlands are an important source of forest biomass in boreal regions and ditch network maintenance (DNM) operations may be needed to restore the drainage functions of ditches. By reviewing the available literature, as well as utilizing an existing hydrological model and analyzing the characteristics of eroded sediments, we assessed the impacts of DNM on runoff and exports of suspended solids (SS), dissolved organic carbon (DOC), nitrogen (N), and phosphorus (P). In general, DNM had minor impact on runoff and dissolved N and P, and it decreased rather than increased DOC exports. To increase the understanding of the hydrochemical impacts of DNM, future research should focus on the characteristics of SS and particulate nutrient exports. A major gap in knowledge is also the very limited regional representativeness of the available studies. High erosion risk in the ditches reaching the mineral soil below peat should be acknowledged when planning mitigation measures.     

Protein adducts as biomarkers of exposure to aromatic diisocyanates in workers manufacturing polyurethane (PUR) foam

This work was undertaken to investigate the usefulness of diisocyanate-related protein adducts in blood samples as biomarkers of occupational exposure to toluene diisocyanate (TDI; 2,4- and 2,6-isomers) and 4,4'-methylenediphenyl diisocyanate (MDI). Quantification of adducts as toluene diamines (TDAs) and methylenedianiline (MDA) was performed on perfluoroacylated derivatives by gas chromatography-mass spectrometry (GC-MS/MS) in negative chemical ionisation mode. TDI-derived adducts were found in 77% of plasma and in 59% of globin samples from exposed workers manufacturing flexible polyurethane foam. The plasma levels ranged from 0.003 to 0.58 nmol mL(-1) and those in globin from 0.012 to 0.33 nmol g(-1). The 2,6-isomer amounted to about two-thirds of the sum concentration of TDA isomers. MDI-derived adducts were detected in 3.5% of plasma and in 7% of globin samples from exposed workers manufacturing rigid polyurethane foam. A good correlation was found between the sum of TDA isomers in urine and that in plasma. The relationship between globin adducts and urinary metabolites was ambiguous. Monitoring TDI-derived TDA in plasma thus appears to be an appropriate method for assessing occupational exposure. Contrary to TDI exposure, adducts in plasma or globin were not useful in assessing workers' exposure to MDI. An important outcome of the study was that no amine-related adducts were detected in globin samples from TDI- or MDI-exposed workers, alleviating concerns that TDI or MDI might pose a carcinogenic hazard. Further studies are nevertheless required to judge whether diisocyanates per se could be such a hazard.     

Do female bank voles (Clethrionomys glareolus) mate multiply to improve on previous mates?

Contrary to classical sexual selection theories, females of many taxa mate with multiple males during one reproductive cycle. In this study, we conducted an experiment on the “trade-up hypothesis”, which proposes that females remate if a subsequently encountered male is potentially superior to previous mates to maximize the genetic quality of their offspring. We presented bank vole females (Clethrionomys glareolus) sequentially with two males of known dominance rank in different orders, i.e., either first subordinate and second dominant, first dominant and second subordinate, or two males that were equal in dominance (high ranking) and observed their mating behavior. We found that 92% of the females mated multiply and did not base their remating decision on male social status. Therefore, polyandry cannot be explained by the “trade-up hypothesis” based on dominance rank in this species. However, we found that dominant males sired significantly more offspring than subordinate males. This varied according to mating order: dominant males sired more offspring when they were second than when they were first. Moreover, litter sizes were significantly smaller when the dominant male was first (smallest relative success of dominant males) compared to litter sizes when mating order was reversed or both males equal in status. Our results suggest that even though multimale mating includes males that are of poorer quality and thus potentially decreases the fitness of offspring, most of a female’s offspring are sired by dominant males. Whether this is due to cryptic female choice, sperm competition, or a combination of both, remains to be tested.     

Group foraging, patch exploitation time and the finder's advantage

 We use a combination of the marginal value theorem (MVT) of Charnov (1976), and a group foraging model featuring information sharing to address patch residence in an environment where food occurs in discrete patches. We shall show that among equal competitors the optimal patch time for the individual that finds the food patch is shorter than that for the non-finder among equal competitors, T _E < T _N. This is the case if the patch-finder commences food harvesting in the patch earlier and manages to monopolise a fraction of the prey items (finder's advantage) before the other individuals come to take their benefit. When individuals differ in their food-searching abilities so that some of them (producers) contribute proportionally more to food-searching than others (scroungers), and differ in ability to compete for the food found, a difference emerges between producer and scrounger individuals in the optimal patch time. Within a patch we always have the finder's advantage (T _E < T _N) regardless of phenotype. Between patches a suite of optimal patch times for encountering individuals emerges depending on the performance of producers and scroungers when changing from solitary feeding to feeding in a group. The optimal patch time for individuals that are affected more severely by competition is shorter than that for individuals of the phenotype with better competitive ability. When both phenotypes are affected similarly no difference in optimal patch times emerges. Received: 13 February 1996 / Accepted after revision: 28 September 1996     

Polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, naphthalenes and polybrominated diphenyl ethers in the edible fish caught from the Baltic Sea and lakes in Finland

A total of 156 fish composite samples were collected from five areas of the Baltic Sea and from three lakes and analysed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polybrominated diphenyl ethers (PBDEs). The European Union's maximum permissible level for PCDD/Fs, 4 pg WHO-TEQ/g fresh weight (fw), was exceeded in salmon, river lamprey and Baltic herring. In other species from the Baltic Sea, the 90th percentile was 3.42 pg WHO(PCDD/F)-TEQ/g fw. In the lake fish, the concentrations of PCDD/Fs, PCBs and PCNs were only 29-46% of those in the same species caught from the Baltic Sea, whereas the concentrations of PBDEs in the lake fish were as high as in the Baltic Sea fish. Dioxin-like PCBs contributed to the total dioxin-like toxicity of PCBs and PCDD/Fs by 49+/-12% in all the analysed samples.     

Support,shape and number of replicate samples for tree foliage analysis

Many fundamental features of a sampling program are determined by the heterogeneity of the object under study and the settings for the error (alpha), the power (beta), the effect size (ES), the number of replicate samples, and sample support, which is a feature that is often overlooked. The number of replicates, alpha, beta, ES, and sample support are interconnected. The effect of the sample support and its shape on the required number of replicate samples was investigated by means of a resampling method. The method was applied to a simulated distribution of Cd in the crown of a Salix fragilis L. tree. Increasing the dimensions of the sample support results in a decrease in the variance of the element concentration under study. Analysis of the variance is often the foundation of statistical tests, therefore, valid statistical testing requires the use of a fixed sample support during the experiment. This requirement might be difficult to meet in time-series analyses and long-term monitoring programs. Sample supports have their largest dimension in the direction with the largest heterogeneity, i.e. the direction representing the crown height, and this will give more accurate results than supports with other shapes. Taking the relationships between the sample support and the variance of the element concentrations in tree crowns into account provides guidelines for sampling efficiency in terms of precision and costs. In terms of time, the optimal support to test whether the average Cd concentration of the crown exceeds a threshold value is 0.405 m3 (alpha = 0.05, beta = 0.20, ES = 1.0 mg kg(-1) dry mass). The average weight of this support is 23 g dry mass, and 11 replicate samples need to be taken. It should be noted that in this case the optimal support applies to Cd under conditions similar to those of the simulation, but not necessarily all the examinations for this tree species, element, and hypothesis test.