紫外大气甲醛卫星遥感反演方法和研究现状

在我国长期稳定的甲醛观测站点十分缺失,卫星平台高时频、大面积覆盖等优势使得通过卫星遥感探测大气甲醛成为了一种重要的研究手段.本文讨论了现有载荷的反演理论和方法,分析了我国大气甲醛的研究现状及不足.简述了从20世纪至今可用于甲醛探测的主要载荷：GOME/ERS-2,SCIAMACHY/ENVISAT,OMI/Aura,GOME-2/MetOp-A（B）,OMPS/Suomi-NPP,总结归纳了各个卫星载荷仪器的轨道信息、时间空间分辨率等相关参数,以及各个传感器在大气甲醛遥感反演中的可行性.由于卫星自上而下的观测方式与地基平台不同,其反演方法也有不同之处,因此本文针对卫星平台综合论述了两种甲醛反演算法：传统的差分吸收光谱法（DOAS）和针对于甲醛反演的一系列改进算法以及近几年提出的主成分分析法（PCA）;另外,本文针对现有反演算法和时空分布在我国中东部地区的研究现状和不足进行了综合讨论,并给出了一定的改进策略.     

嘉兴市城市河网区多环芳烃污染源解析及生态风险评价

为研究嘉兴市城市河网区水体中多环芳烃的污染水平和来源并进行生态风险评价,采用气相色谱-质谱法（GC-MS）对环境优控多环芳烃（PAHs）进行分析检测.结果表明,枯水期和丰水期分别检测出10种和16种优控PAHs,质量浓度范围分别为77.32~283.76ng ·L^-1和13.05~133.02ng ·L^-1,平均质量浓度分别为143.83ng ·L^-1和73.47ng ·L^-1;枯水期低环（2环和3环）占比79.18%,丰水期低环占比73.60%;嘉兴市河网区水体多环芳烃污染情况与国内外其他地区相比处于较低水平;采用同分异构比值法和主成分分析法进行污染来源分析,结果表明嘉兴市枯水期和丰水期河网水体中多环芳烃污染主要来源为城市面源污染、燃烧源以及交通污染源;Kalf风险熵值法评价结果表明,枯水期：萘（Nap）、苊烯（Acy）、二氢苊（Ace）、芴（Flu）、菲（Phe）、蒽（Ant）、荧蒽（Fla）、芘（Pyr）和苯并［a］蒽（BaA）以及∑PAHs为中等生态风险水平,丰水期：萘（Nap）、苊烯（Acy）、芴（Flu）、菲（Phe）、荧蒽（Fla）、芘（Pyr）、苯并［a］蒽（BaA）、苯并［b］荧蒽（BbF）、苯并［k］荧蒽（BkF）、苯并［a］芘（BaP）、茚苯［1,2,3-cd］芘（InP）和苯并［ghi］苝（BghiP）属于中等生态风险水平,∑PAHs为低生态风险水平;总体而言,嘉兴市河网水体中PAHs生态风险呈中等水平,有关部门需采取措施降低河网水体中PAHs的生态风险.     

城市水源地水质指标年内分配的不均匀变化

以昆明市主要供水水源（松华坝水库）的总氮、总磷、氮氨、高锰酸盐指数为研究对象,借鉴水文界经验,应用集中度、不均匀系数和调节系数概念,计算并分析比较了集中度、不均匀系数和调节系数在水质指标年内分配规律中的适用性。研究表明：集中度、不均匀系数和调节系数可从不同侧面反映了水质变化的年内分布特征,且3个指标在不同时间尺度间具有明显的一致性,因此,在水质监测中只需要应用每个季度的监测数据就能反映出水质变化的年内分配不均匀性。     

分段进水A/O工艺生物脱氮技术分析

分段进水缺氧/好氧(A/O)工艺是一种高效的污水生物脱氮工艺,在此主要介绍了分段进水生物脱氮工艺的系统工作原理及工艺特性,探讨了该工艺运行操作和设计的几个重要影响因素,如进水流量分配比、溶解氧、污泥回流比、C/N比等,并且对分段进水最高理论脱氯率进行了描述.     

复杂水环境模拟研究与发展趋势

从水质变化过程、水体空间维度和边界条件三个方面简要回顾了水环境模拟的研究与发展进程。介绍了目前国内外广泛应用的综合性水质模型软件：QUAL2E/2K、CE-QUAL-RIV1、MIKE11、CE-QUAL-W2、MIKE21、Delft3D、WASP、EFDC、BASINS、WARMF、SMS的特点和适用范围,重点讨论了EFDC和WASP集成应用于复杂水环境模拟的优势。对复杂水环境模拟的发展趋势进行了展望。     

改性TiO2的制备、表征及光解水制氢性能研究

以陶粒为载体,采用改进的溶胶-凝胶法制备B、Ni共掺杂陶粒负载纳米TiO2光催化剂。利用XRD,TG-DTA,FT-IR等手段对其组成、结构等进行分析和表征。以250 W紫外灯为光源,三乙胺为目标污染物和电子给体,考察了B-Ni2O3-TiO2/陶粒合成体降解污染物耦合光解水制氢的光催化性能;结果表明：所制得的B-Ni2O3-TiO2/陶粒催化剂具有较高的产氢效率,并探讨了焙烧温度、三乙胺溶液初始浓度等对催化剂光催化活性的影响。     

EMERGY analysis for sustainability evaluation of the Baiyangdian wetland ecosystem in China

This study presents a quantitative and ecological benefit evaluation of the Baiyangdian wetland in China between the years 2000 and 2006. Methods of EMERGY analysis were applied to illustrate the wetland ecosystem, to evaluate the economic and environmental inputs and consequent yields, and to assess the sustainability of the Baiyangdian wetland. The indicators for the integrated ecological and economic system, such as EMERGY yield ratio (EYR) (7.51), EMERGY investment ratio (EIR) (4.52), environmental loading ratio (ELR) (2.92), EMERGY exchange ratio (0.41), and EMERGY sustainable indicator (ESI) (2.57) were calculated, compared, analyzed, and discussed. The non-renewable investment in Baiyangdian was greater than renewable investment, leading to the unsustainable development of the system. High EYR indicated that the Baiyangdian integrated system had created huge profits for its people, while ELR and ESI revealed that human behavior has been a heavy burden on the environment, and countermeasures should be taken by the Chinese government to relieve and resolve these problems. Potential management methods were also proposed in this paper.     

Acid deposition critical loads modeling for the simulation of sulfur exceedance and reduction in Guangdong, China

The current acid deposition critical loads in Guangdong, China were calculated using the PROFILE model with a 3 km × 3 km resolution. Calculations were carried out for critical loads of potential acidity, actual acidity, sulfur and nitrogen, with values in extents of 0–3.5, 0–14.0, 0–26.0 and 0–3.5 kmol/(hm2·year), respectively. These values were comparable to previously reported results and reflected the influences of vegetation and soil characteristics on the soil acid buffering capacity. Simulations of S...     

凹凸棒石/γ-Fe_2O_3/碳纳米复合材料的制备及其对苯酚的吸附作用

为获得同时具有有机亲和性和磁分离特性的吸附材料,以凹凸棒石黏土和废活性白土为原材料,通过铁盐水解共沉淀和在氢气气氛下程序升温煅烧的方法,制备廉价的凹凸棒石γ-Fe2O3/碳纳米复合材料.运用磁化率分析,红外吸收光谱,透射电镜,X射线衍射分析和碳含量分析对其进行了表征,并研究了复合材料吸附去除水中苯酚的动力学、吸附试验中pH的影响及同等条件下与其他吸附材料吸附性能的对比.结果表明,复合材料的磁化率值为2 769×10-8m3/kg,用磁分离工序即可把该吸附材料从溶液中快速分离出来;铁的磁性氧化物以γ-Fe2O3的形态负载到凹凸棒石表面,颗粒直径为10～60nm;碳以无定形的形态负载在凹凸棒石晶体表面;复合材料中的ω(碳)为7.4%,材料中出现了有机官能团-CH3和-CH2-.对苯酚的吸附试验表明,复合材料对苯酚的去除率是凹凸棒石原矿的3倍.     

Complete oxidation of methane on Co3O4-SnO2 catalysts

Co₃O₄-SnO₂ hybrid oxides were prepared by the coprecipitation method and were used to oxidate methane (CH₄) in presence of oxygen. The Co₃O₄-SnO₂ with a molar ratio of Co/(Co + Sn) at 0.75 exhibited the highest catalytic activity among all the Co₃O₄-SnO₂ hybrid oxides. Experimental results showed that the catalysts were considerably stable in the CH₄ combustion reaction, and were verified by X-ray photoelectron spectra (XPS). It was found that Co₃O₄ was the active species, and SnO₂ acted as a support or a promoting component in the Co₃O₄-SnO₂ hybrid oxides. The surface area was not a major factor that affected catalytic activity. The hydrogen temperatureprogrammed reduction (H₂-TPR) results demonstrated that the interaction between cobalt and tin oxides accelerated the mobility of oxygen species of Co₃O₄-SnO₂, leading to higher catalytic activity.