Plume Rise Determination-A New Technique Without Equations

Information on plume rise is important in determining the resulting concentrations of a pollutant on the ground. Practical use of plume rise values may be made in connection with stack design, the use of urban air pollution models, and in evaluating the hazards to a population complex.

This paper presents a new equationless technique for estimating plume rise as well as a comparison of seventeen commonly used plume rise formulas. Data from 10 sets of experiments, involving 615 observations and 26 different stacks, were used to study the relation between plume rise and related meteorological and stack parameters.

An independent data set was used to test the derived methods for determining plume rise. These data were obtained by Bringfelt of Sweden and contained measurements from stacks smaller than that at the Argonne National Laboratory to those approaching the TVA stacks.

A significant improvement in the prediction of plume rise from meteorological and stack parameters resulted from the use of a new technique called the Tabulation Prediction Technique. This is a method whereby an estimate of the value of a dependent variable may be obtained from information on the independent variables. Combinations of the independent variables—wind speed, heat emission rate, momentum rate, and stability—are arranged in an ordered sequence. For each combination of independent variables, the cumulative percentile frequency distribution of the dependent variable based on past measurements is given along with other statistics such as the mean, standard deviation, and interquartile range, i.e., the difference in plume rise between the 75th and 25th percentile values. Thus, one may look up the combination of independent variables just as one looks up words in a dictionary to obtain the percentile frequency distribution of the dependent variable. The mean, for each combination of independent variables may be considered as the best estimate for the given conditions.     

Industrial Pollution Prevention! A Critical Review

Abstract

Pyrolytic product distribution rates and pyrolysis behavior of tire-derived fuels (TDF) were investigated using thermogravimetric analyzer (TGA) techniques. A TGA was designed and built to investigate the behavior and products of pyrolysis of typical TDF specimens. The fundamental knowledge of TGA analysis and principal fuel analysis are applied in this study. Thermogravimetry of the degradation temperature of the TDF confirms the overall decomposition rate of the volatile products during the depolymerization reaction. The principal fuel analysis (proximate and ultimate analysis) of the pyrolytic char products show the correlation of volatilization into the gas and liquid phases and the existence of fixed carbon and other compounds that remain as a solid char. The kinetic parameters were calculated using least square with minimizing sum of error square technique. The results show that the average kinetic parameters of TDF are the activation energy, E = 1322 ± 244 kJ/mol, a pre-exponential constant of A = 2.06 ± 3.47 × 10¹⁰ min^?1, and a reaction order n = 1.62 ± 0.31. The model-predicted rate equations agree with the experimental data. The overall TDF weight conversion represents the carbon weight conversion in the sample.     

Error orientation questionnaire (EOQ): reliability,validity, and different language equivalence

An Error Orientation Questionnaire (EOQ) was developed, consisting of eight scales on attitudes to and on coping with errors at work. In Study I (representative sample of a German city, N=478) six scales were developed with the help of a confirmatory factor analysis using LISREL techniques. They comprise error competence, learning from errors, error risk taking, error strain, error anticipation, covering up errors. All constructs were validated. In a second study, items were added to the scales and two additional scales, ‘error communication’ and ‘thinking about errors’, were included. The scales were translated into English and Dutch and 160 students in the Netherlands filled out both language versions (Study II). The 8‐factor solutions in English and Dutch were replicated. The issue of language equivalence of these two language versions were taken up (equivalence across correlations exists). Potentially biasing variables did not influence the solutions. Practical uses of the EOQ are pointed out. Copyright © 1999 John Wiley & Sons, Ltd.     

固相萃取和气相色谱-质谱分析酚类化合物应用简报

固相萃取为分析水中痕量化合物提供了简便的分析方法 .高分子树脂如聚苯乙烯 二乙烯基苯比常用的十八烷基和类似的硅胶基体的固相萃取吸附剂好 ,特别是对极性较大的化合物 .最近 ,安捷伦科技扩展了所提供的固相萃取产品 ,包括了聚苯乙烯 二乙烯基苯固相萃取材料AccuBondⅡ ENV小柱 ,专门用于环境应用 .本文用以前介绍的保留时间锁定气相色谱 /质谱分析方法[1 ] ,使用这种聚苯乙烯 二乙烯基苯固相萃取材料对水中浓度为1 0 μg·l- 1 的选定酚类分析能达到的准确度和精密度进行了初步论证 .固相萃取过程快速 ,缩短干燥时间 ,且只需要两种回收率指示物 (Surrogates) .小柱经优化设计 ,提高了酚类化合物的回收率 ,而其它小柱的回收率通常很低且不重复 .苯酚的回收率超过 70 % ,其它酚类化合物的回收率超过 90 % .精密度大于 5 % ,以平均绝对偏差表示的准确度 (以百分数表示 )除了 2 环己基 2 4 二硝基酚之外 ,都大于 8% .样品萃取速率高 (2 0— 2 5ml·min- 1 ) ,萃取 1L样品不到 1h即可完成     

Lipid-Filled semipermeable membrane devices and mussels as samplers of organochlorine compounds in lake water

Semipermeable membrane sampling devices (SPMDs) and caged lake mussels (Anodonta piscinalis) were simultaneously deployed at four lake watercourse sites in Central Finland four weeks in August 1992. This study was part of the regular annual monitoring of the organochlorine compounds (OCC) in pulp-mill recipient watercourses of Finland with bivalves. Chlorohydrocarbons (CHCs), chlorophenol compounds (PCPs), chloroanisoles (PCAs) and chloroveratroles (PCVs) were analyzed from lipid extract of mussels and from the synthetic triolein lipid of the SPMDs. Hexane-diethyl ether (9:1, v/v) dialysis using polyethylene membrane was applied in dean up of the SPMD lipids and, for comparison, to six sets of the mussel fat. Dialysis recovered CHCs but not PCPs from the mussel fat. CHCs, PCPs, PCAs and PCVs were all recovered in dialysis of the SPMD lipid. Handling of SPMDs in the transport and deployment operations caused significant OCC contamination for the blank SPMDs. Similar trends were revealed in the OCC profiles for mussels ans SPMDs. An exception was the lack of PCPs appearing in SPMDs that did appear in mussels and in a complementary manner the appearance of the PCAs and PCVs in SPMDs.     

Insecticidal and antifungal chemicals produced by plants: a review

Leaf-cutting ants of the Attini tribe are a major pest of agricultural and forestry productions in the New World. Economic losses caused by these ants were estimated at several million dollars per year. These ants need to live in symbiosis with a basidiomycete fungus. Due to their mutualistic interaction with the symbiotic fungus, management of Attini ants can be done with insecticides or fungicides or both. So far, synthetic pesticides were the main control means, albeit with negative effects on the environment. Very few studies describe alternative methods for the control of leaf-cutting ants such as the use of insecticidal and fungicidal plant extracts. There is therefore a need of knowledge on phytochemicals and plants that could be used as insecticides and fungicides. Here, we review chemicals of plant origin and species with insecticidal and fungicidal activities. We establish a list of plants and phytochemicals that could manage leaf-cutting ants and also other insects, notably insects that use fungus-based agriculture. An exhaustive literature search of 1965 references from 1923 to 2010 was conducted using scientific databases, chemical databases, botanical databases, and books to identify published papers related to insecticidal and fungicidal chemical compounds stemmed from plant species. The major points are the following: (1) 119 and 284 chemicals have been cited in the literature for their insecticidal and fungicidal activities, respectively; (2) 656 and 1,064 plant species have significant insecticidal and fungicidal activities, respectively; (3) 3 main chemical classes were most cited for these activities: alkaloids, phenolics, and terpenoids; (4) 20 interesting chemicals with the both insecticidal and fungicidal activities were found; and (5) 305 plant species containing these chemicals were cited. To conclude, 20 chemicals: caryophyllene oxide, cinnamaldehyde, eugenol, helenalin, linalool, menthone, myristicin, pulegone, thymol, anethole, anisaldehyde, elemicin, isopimpinellin, plumbagin, podophyllotoxin, psoralen, xanthotoxin, anonaine, solamargine, and tomatine; two main plant families, Lamiaceae and Apiaceae; and 17 species of these families were particularly interesting for the management of leaf-cutting ants.