Metallakkumulation in Moosen: Standörtliche und regionale Randbedingungen des Biomonitoring von Luftverunreinigungen

Goal and Scope

Several studies show that the concentration of metals in mosses depends not only on metal deposition but also on factors such as moss species, canopy drip, precipitation, altitude, distance to the sea and the analytical technique used. However, contrasting results have been reported and the interpretation of the spatial variability of the metal accumulation in mosses remains difficult. In the presented study existing monitoring data from the European Heavy Metals in Mosses Surveys together with surface data on precipitation, elevation and land use are statistically analysed to assess factors other than emissions that have an influence on the metal accumulation in the mosses.

Main Features

Inference statistics and Spearman correlation analysis were applied to examine the association of the metal accumulation and the distance of the monitoring sites to the sea as well as the altitude. Whether or not significant differences of the metal loads in the mosses exist at national borders was examined with help of the U-test after Mann and Whitney. In order to identify and rank the factors that are assumed to have an influence on the metal uptake of the mosses Classification and Regression Trees (CART) were applied.

Results

No clear tendency could be derived from the results of the inference statistical calculations and the correlation analyses with regard to the distance of the monitoring site to the sea and the altitude. According to the results of the CART-analyses mainly the moss species, potential emission sources around the monitoring sites, canopy drip and precipitation have an effect on the metal bioaccumulation. Assuming that each participating country followed strictly the manual for sampling and sample preparation the results of the inference statistical calculations furthermore suggest that in most cases different techniques for digestion and analysis bias the measurements significantly.

Discussion

For the first time a national monitoring data base consisting of measurement data and metadata as well as surface information on precipitation, land use and elevation was applied to examine influence factors on the metal bioaccumulation in mosses. The respective results mirror existing knowledge from other national studies to a large extend, although further analyses are necessary to affirm the findings. These analyses should include data from other national monitoring programmes and should additionally be carried out with other decision tree algorithms than CART.

Conclusions

The local variability in the metal concentration in mosses can be uncovered in terms of predictors or underlying hidden causes by using CART. Ideally, such an approach should be applied across the whole of Europe. This will only be feasible if all participating countries provide additional information about site characteristics as currently is done in for example the German moss surveys.

Recommendations

The UNECE Metals in Mosses Survey experimental protocol should be improved in order to reduce the observed influences, to enhance standardisation, and to strengthen the quality control. This implies the integration of sampling site describing metadata into the assessment. Furthermore, basis research is needed to test the hypothesis concerning moss species-specific accumulation of depositions.

Perspectives

Provided that the presented results hold true in further analyses correction factors should be applied on the moss data in order to get the depicted spatial patterns and temporal trends of metal bioaccumulation unbiased. Such factors should be calculated for natural landscape units or ecoregions that are homogeneous with regard to climate, vegetation and altitude.     

Critical flow-storm approach to total maximum daily load (TMDL) development: an analytical conceptual model

One of the key challenges in the total maximum daily load (TMDL) development process is how to define the critical condition for a receiving waterbody. The main concern in using a continuous simulation approach is the absence of any guarantee that the most critical condition will be captured during the selected representative hydrologic period, given the scarcity of long-term continuous data. The objectives of this paper are to clearly address the critical condition in the TMDL development process and to compare continuous and event-based approaches in defining critical condition during TMDL development for a waterbody impacted by both point and nonpoint source pollution. A practical, event-based critical flow-storm (CFS) approach was developed to explicitly addresses the critical condition as a combination of a low stream flow and a storm event of a selected magnitude, both having certain frequencies of occurrence. This paper illustrated the CFS concept and provided its theoretical basis using a derived analytical conceptual model. The CFS approach clearly defined a critical condition, obtained reasonable results and could be considered as an alternative method in TMDL development.     

Application of a value-based equivalency method to assess environmental damage compensation under the European Environmental Liability Directive

The Environmental Liability Directive (ELD) establishes a framework of liability based on the ‘polluter-pays’ principle to prevent and remedy environmental damage. The ELD requires the testing of appropriate equivalency methods to assess the scale of compensatory measures needed to offset damage. The aim of this paper is to contribute to fill the existing knowledge gap on the application of the value equivalency approach for damage compensation in this context. We analyze the toxic spill damaging the Doñana National Park (Spain) in 1998. The welfare losses associated with the resource damage are estimated using non-market valuation and compared to the value of the compensatory measures taken after the accident. Our results show that the in-kind compensation may have been insufficient to offset the welfare losses. We conclude that a more comprehensive knowledge of the human welfare effects caused by environmental damage is of substantial importance to determine compensatory remediation, as insufficient information in this respect can lead to erroneous decisions causing loss to society.     

Mapping atmospheric depositions of cadmium and lead in Germany based on EMEP deposition data and the European Moss Survey 2005

Background

The vertical migration of phytoplankton was investigated in natural waters using in situ fluorescence profiling, chlorophyll a concentrations and life counts at two study sites differing in coloured dissolved organic matter (cDOM) concentrations. The data from the corresponding water depths (50-cm intervals down to 10 m) and times (hourly, before dawn to sunset, several days) were related to the highly resolved (2 nm) underwater ultraviolet radiation (UVR)/photosynthetic active radiation (PAR) transparency (290 to 700 nm).

Results

Chlorophyll a maxima of mainly motile dinoflagellates were observed in situ at all days and at both study sites (open marine, brackish waters), independent on prevailing weather conditions or cDOM concentrations. Phytoplankton migration was triggered solely by irradiance in the 400- to 700-nm wavelength range (PAR) at the particular water depth, irrespective of PAR/UVR ratios and surface UVR (290 to 400 nm), after an illumination period of about 40 min. Interestingly, the PAR tolerance levels of the phytoplankton, which have been lower in cDOM-rich waters, matched their light acclimation values determined by parallel PAM measurements.

Conclusions

The response of the phytoplankton to PAR is not a sufficient protection strategy versus increasing UVR levels, which might have wide ecological implications beyond the level of primary producers to impact important ecosystem functions such as the delicate trophic interactions.     

Investigation and Long-Term Monitoring of Phragmites australis Within Virginia's Constructed Wetland Sites

Phragmites australis Trin., and/or aggressive species, Typha spp. Tidally influenced wetlands that have subtidal perimeter ditches have significantly less (P < 0.05) P. australis in the wetland interior than those without perimeter ditches. Fractured regression analyses show that 6 years after construction, P. australis invasion can be extensive. Linear regression analysis suggests that, if conditions remain favorable for P. australis colonization, constructed wetlands could be overrun in 40 years.     

Critical flow-storm approach to total maximum daily load(TMDL) development: an analytical conceptual model

One of the key challenges in the total maximum daily load (TMDL) development process is how to define the critical condition for a receiving waterbody. The main concern in using a continuous simulation approach is the absence of any guarantee that the most critical condition will be captured during the selected representative hydrologic period, given the scarcity of long-term continuous data. The objectives of this paper are to clearly address the critical condition in the TMDL development process and to compare continuous and event-based approaches in defining critical condition during TMDL development for a waterbody impacted by both point and nonpoint source pollution. A practical, event-based critical flow-storm (CFS) approach was developed to explicitly addresses the critical condition as a combination of a low stream flow and a storm event of a selected magnitude, both having certain frequencies of occurrence. This paper illustrated the CFS concept and provided its theoretical basis using a derived analytical conceptual model. The CFS approach clearly defined a critical condition, obtained reasonable results and could be considered as an alternative method in TMDL development.     

Development and testing of a micro wind tunnel for on-site wind erosion simulations

Wind erosion processes affect soil surfaces across all land uses worldwide. Understanding the spatial and temporal scales of wind erosion is a challenging undertaking because these processes are diverse and highly variable. Wind tunnels provide a useful tool as they can be used to simulate erosion at small spatial scales. Portable wind tunnels are particularly valued because erosion can be simulated on undisturbed soil surfaces in the field. There has been a long history of use of large portable wind tunnels, with consensus that these wind erosion simulation tools can meet real world aerodynamic criteria. However, one consequence of striving to meet aerodynamic reality is that the size of the tunnels has increased, making them logistically difficult to work with in the field and resulting in a tendency to homogenise naturally complex soil surfaces. This homogenisation is at odds with an increasing awareness of the importance that small scale processes have in wind erosion. To address these logistical and surface homogenisation issues we present here the development and testing of a micro wind tunnel (MWT) designed to simulate wind erosion processes at high spatial resolution. The MWT is a duct-type design—0.05 m tall 0.1 m wide and with a 1.0 m working section. The tunnel uses a centrifugal motor to suck air through a flow‐conditioning section, over the working section and then through a sediment collection trap. Simulated wind velocities range from 5 to 18 m s^?1, with high reproducibility. Wind speeds are laterally uniform and values of u _* at the tunnel bed (calculated by measuring the pressure gradients within the MWT) are comparable with those of larger tunnels in which logarithmic profiles can be developed. Saltation sediment can be added. The tunnel can be deployed by a single person and operated on slopes ranging from 0 to 10°. Evidence is presented here that the MWT provides new and useful understanding of the erodibility of rangelands, claypans and ore stockpiles.