Occurrence of polybrominated diphenyl ethers (PBDEs) and 2,2’,4,4’,5,5’-hexabromobiphenyl (BB-153) in water samples from the Diep River, Cape Town, South Africa

Until recently, studies reporting the concentrations of polybrominated diphenyl ethers (PBDEs) as well as polybrominated biphenyls (PBBs) are generally scarce in the literature. Consequently, this study was aimed to investigate the occurrence and concentrations of certain PBDE congeners (BDE 28, 47, 100, 99, 154, 153, 183 and 209) and BB 153 in river water samples collected bi-monthly from the Diep River. The routine analyses of the target compounds were performed using a high-capillary GC–microelectron capture detection, while their structural elucidation was assessed using GC-TOF-MS technique. The overall mean concentrations of the sum of the eight PBDE congeners were 2.60, 4.83 and 4.29 ng/L for the upstream, point of discharge and downstream sampling points, respectively. Similarly, the overall mean concentrations of BB 153 were 0.25, 4.85 and 1.56 ng/L for the upstream, point of discharge and downstream sampling points, respectively. BDE 47 was the dominant congener found in these samples contributing between 19 and 26 % to the total PBDEs across the sampling points. The statistical analyses performed on the results obtained showed that all the congeners, except BDE 209 in certain instances, had strong positive correlations with one another, thus suggesting that these contaminants could be emanating from the same source. In this study, potential sources of these pollutants other than WWTP discharges into the investigated river were also identified. However, the relatively high concentrations of the target compounds found at the point of discharge sampling point coupled with the large volume of treated effluent being discharged suggested that the contributions from this source could be very significant over time.     

Environmental and socio-economic impacts of pipe drainage in Pakistan

Many drainage schemes and salinity control projects have been executed world wide. Pipe drainage has widely been used in Pakistan, Egypt and India to control waterlogging. The impact of pipe drainage on land and water was evaluated in this paper using data of three pipe drainage projects in Pakistan namely Khushab Salinity Control and Reclamation Project, Fourth Drainage Project in Faisalabad and Swabi Salinity Control and Reclamation Project. Data by regular monitoring of these projects were collected. The effect of pipe drainage on water table depth at these three locations has been compared. Water quality and soil salinity improvement due to the pipe drainage has also been investigated. Data, related to water table depths and discharges from drain pipes/wells, was collected. Observation wells, installed at various places by the Water and Power Development Authority, were used for collection of this data. To evaluate the impact of the projects on salinity, soil samples from all the three locations were tested. A questionnaire was prepared to get the view of the people about the projects. It was revealed that in these areas, due to subsurface pipe drainage, the percentage of the abandoned land has been considerably decreased. Over drainage was observed in a few places of the projects. The farmers at such places were asked to change their cropping patterns. Ultimately, there has been an increase in area under cultivation, crop yields and cropping intensity in the projects’ area.     

Chapter one: exposure measurements

Determining human exposure to suspended particulate concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these are typically measured with time-integrated samples on filters that are later submitted to laboratory analyses. This requires substantial sample handling, quality assurance, and data reduction. Newer technologies are being developed that allow in-situ, time-resolved measurements for mass, carbon, sulfate, nitrate, particle size, and other variables. These are large measurement systems that are more suitable for fixed monitoring sites than for personal applications. Human exposure studies need to be designed to accomplish specific objectives rather than to serve too many purposes. Resources need to be divided among study design, field sampling, laboratory analysis, quality assurance, data management, and data analysis phases. Many exposure projects allocated too little to the non-measurement activities.     

Copper biosorption on immobilized seaweed biomass： Column breakthrough characteristics

The biosorption of copper by the brown seaweed Sargassum baccularia,immobilized onto polyvinyl alcohol(PVA)gel beads, was investigated with fixed-bed experiments.Laboratory-scale column tests were performed to determine breakthrough curves with varying flow rates and feed concentrations.A theoretical fixed-bed model,known as the Bohart-Adams equation,was evaluated in simulating the experimental breakthrough curves.The Bohart-Adams model qualitatively predicted the breakthrough trends.PVA- immobilized seaweed biomass beads were amenable to efficient regeneration with aqueous solution containing the chelating agent ethylenediaminetetraacetic acid(EDTA).The biosorbent retained most of its original uptake capacity over three cycles of use.The excellent reusability of the biosorbent could lead to the development of a viable metal remediation technology.     

A monitoring of environmental effects from household greywater reuse for garden irrigation

The option of reusing greywater is proving to be increasingly attractive to address the water shortage issue in many arid and semiarid countries. Greywater represents a constant resource, since an approximately constant amount of greywater is generated from kitchen, laundries, bathroom in every household daily, independent of the weather. However, the use of greywater for irrigation in particular for household gardening may pose major hazards that have not been studied thoroughly. In this study, a 1-year monitoring was conducted in four selected households in Perth, Western Australia. The aim of the monitoring works is to investigate the variability in the greywater flow and quality, and to understand its impact in the surrounding environments. Case studies were selected based on different family structure including number, ages of the occupants, and greywater system they used. Samples of greywater effluent (showers, laundries, bathtub, and sinks), leachate, soil, and plants at each case study were collected between October 2008 and December 2009 which covered the high (spring/summer) and low (autumn/winter) production of greywater. Physical and chemical tests were based on the literature and expected components of laundry and bathroom greywater particularly on greywater components likely to have detrimental impacts on soils, plants, and other water bodies. Monitoring results showed the greywater quality values for BOD, TSS, and pH which sometimes fell outside the range as stipulated in the guidelines. The soil analyses results showed that salinity, SAR, and the organic content of the soil increased as a function of time and affected the plant growth. Nutrient leaching or losses from soil irrigated with greywater shows the movement of nutrients and the sole impact from greywater in uncontrolled plots in case studies is difficult to predicted due to the influence of land dynamics and activities. Investigative and research monitoring was used to understand greywater irrigation in households. Greywater quality is very site specific and difficult to predetermine or control except for the use of some recommended household products when using greywater. Investigative and research monitoring was indicated that greywater quality is very site specific and difficult to predetermine or control except for the use of some recommended household products when using greywater.     

Prediction of Soil and Nutrient Losses in A Highland Catchment

Highland catchments in tropical regions are frequently subjected to soil erosion and the transport of chemicals downstream. Any drastic changes in land use will increase the severity of these processes of land degradation. A simulation study using GLEAMS (Groundwater Loading Effects of Agricultural Management Systems) was conducted at a catchment presently under tea farming in Cameron Highlands, Malaysia. Soil, water and nutrient transport associated with several alternative land uses was studied. In addition, the effect of a disruptive form of land clearing on soil, water and nutrient losses was also investigated. Modelling with GLEAMS required information from field measurements and observations, laboratory analyses, guide tables, industry records, maps and reports published by soil survey and meteorological departments. The most critical step in simulating soil and water movement using GLEAMS is the identification of a representative flow sequence. In the catchment under study, the representative flow sequence was overland flow–channel 1–channel 2. Input data on soil erodibility, porosity and surface roughness were manipulated to represent various degrees and forms of disturbance to the surface soil layer. For all land uses studied, the highest soil loss was predicted for the overland flow area where slope gradient is high and the soil friable. The variations in soil loss, runoff and nutrient loss between landscape elements and between land uses were consistent with soil erosion features observed in the field. Soil and nutrient losses were substantial for crops such as cabbage that required land shaping activities and frequent ploughing of the soil. Predicted data on enrichment ratio of specific surface (ERSS) are consistent with nutrient enrichment processes in the field and could prove to be useful in studies on chemical transport in highland catchments.     

The effects of application of agricultural wastes to firing range soil on metal accumulation in Ipomoea aquatica and soil metal bioavailability

The immobilisation of heavy metals in the soil of a 25-year-old active firing range using durian (Durio zibethinus L.) tree sawdust (DTS), coconut coir (CC) and oil palm empty fruit bunch (EFB) was investigated. The immobilisation effects were evaluated in terms of metal accumulation in water spinach (Ipomoea aquatica) and soil metal bioavailability. A pot experiment was conducted by amending the firing range soil with DTS, CC and EFB at application rates of 0%, 1% and 3% (w/w), respectively. All amendments increased the biomass yield and reduced the uptake of heavy metals in the plant tissue. Zn had the highest values of Bioconcentration Factor (BCF: 0.301–0.865) and Translocation Factor (TF: 1.056–1.883). Pb was the least-accumulated and transported metal in the plant tissues, with the BCF and TF values of 0.019–0.048 and 0.038–0.116, respectively. The bioavailable fraction of heavy metals in the firing range soil decreased following the application of the three agricultural wastes studied. DTS, CC and EFB did not cause toxicity symptoms in the water spinach over the pot experiment. Therefore, DTS, CC and EFB are considered promising immobilising agents for the remediation of metal-contaminated land.     

Remediation technologies for heavy metal contaminated groundwater

The contamination of groundwater by heavy metal, originating either from natural soil sources or from anthropogenic sources is a matter of utmost concern to the public health. Remediation of contaminated groundwater is of highest priority since billions of people all over the world use it for drinking purpose. In this paper, thirty five approaches for groundwater treatment have been reviewed and classified under three large categories viz chemical, biochemical/biological/biosorption and physico-chemical treatment processes. Comparison tables have been provided at the end of each process for a better understanding of each category. Selection of a suitable technology for contamination remediation at a particular site is one of the most challenging job due to extremely complex soil chemistry and aquifer characteristics and no thumb-rule can be suggested regarding this issue. In the past decade, iron based technologies, microbial remediation, biological sulphate reduction and various adsorbents played versatile and efficient remediation roles. Keeping the sustainability issues and environmental ethics in mind, the technologies encompassing natural chemistry, bioremediation and biosorption are recommended to be adopted in appropriate cases. In many places, two or more techniques can work synergistically for better results. Processes such as chelate extraction and chemical soil washings are advisable only for recovery of valuable metals in highly contaminated industrial sites depending on economical feasibility.     

Microplastics in aquatic environment: characterization,ecotoxicological effect,implications for ecosystems and developments in South Africa

Microplastics are small-size plastic piece scales (particles <?5 mm) in sediments and waters which interact with environment and organisms by various means. Microplastics are becoming a universal ecological concern since they may be a source of hazardous chemicals to marine organisms and environments. Recent research suggests microplastics could enable the transfer of hydrophobic aquatic pollutants or chemical additives to biota. Even though microplastic presence and interactions are recently being detected in marine and freshwater systems, the fate of microplastics is still very poorly understood. This literature review is a summary of the sources and transport of microplastics, their interactions with toxic chemicals and the methodologies for chemical quantification and characterization of microplastics. The environmental outcome and impact of microplastics in wastewater treatment plants were assessed as well as the trends and update on microplastic research in the South African aquatic ecosystem.

     

Performance evaluation of 1-D numerical model HEC-RAS towards modeling sediment depositions and sediment flushing operations for the reservoirs

Sediment inflow to the reservoir is a key factor to calculate life of the reservoir. Flushing is a very useful technique in order to enhance the life of reservoir. From the literature review, 14 reservoirs were considered where flushing has already been practiced and only 6 reservoirs were found successful in flushing. The others were found partially flushed. In this research, data of three successfully flushed reservoirs namely Baira reservoir (India), Gebidem reservoir (Switzerland), and Gmund reservoir (Austria) were used to run 1-D numerical model HEC-RAS. In the first phase, the longitudinal profiles of delta were modeled and calibrated with observed sediment depositions. In the presence of available data of discharges and respective reservoir levels, the modeled deltas were used for flushing the deltas. With the help of modeled delta and corresponding flushing discharges, sediment deposition and flushing durations were computed. The simulated flushed durations were 31, 102, and 180 h for Baira, Gebidem, and Gmund reservoirs, respectively. The simulated flushed durations were found close to observed durations. Hence, the use of 1-D numerical model HEC-RAS is encouraged for modeling of sediment deposits and flushing operations.