Aerobic and anaerobic transformations of sulfide in a sewer system--field study and model simulations.

The formation and fate of sulfide in a force main and a downstream-located gravity sewer were investigated in an extensive field study. Sulfide formation in the force main was significant. However, during 14 minutes of transport in the gravity sewer, the sulfide concentration decreased 30%, on average. An application of a conceptual sewer process model for simulating the formation and fate of sulfide was demonstrated. Overall, the model predicted that approximately 90% of the decrease of the sulfide concentration in the gravity sewer was the result of sulfide oxidation and that only a small fraction entered the sewer atmosphere, causing odor and corrosion. Even so, the model predicted concrete corrosion rates of up to 1.2 mm/y in the gravity sewer section.     

Impact of mineral components and selected trace metals on ambient PM10 concentrations

PM10 levels of the mineral components Si, Al, Fe, Ca, Mg and some trace metals were measured at three different sites in the urban area of Vienna (Austria). Observed trace metal concentrations varied between less than 0.1 ng m^?3 (Cd) and approximately 200 ng m^?3 (Zn), mineral components showed enhanced concentrations ranging from 0.01 μg m^?3 (Ca) to 16.3 μg m^?3 (Si). The contribution of the respective mineral oxides to PM10 mass concentrations accounted on average for 26.4 ± 16% (n = 1090) of the PM10 mass, with enhanced rates in spring and autumn (monthly averages of up to 40%) and decreased contributions in the cold season (monthly averages below 10%). The atmospheric occurrence of Al, Ti and Sr could be assigned to crustal sources, whereas for the elements Ba, Ca, Fe, Mg, Mn and V an increased contribution of non-crustal origin was observed. PM10 levels of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, Sn and Zn were predominantly derived from man-made emissions. Intersite comparison indicated that urban PM10 mass concentrations and PM10 levels of As, Pb and Zn were predominantly influenced from the transport of aerosols from outside into the city, whereas for the elements Ba, Mg, Ca, Cu and Fe a distinctly increased impact of local emissions was observed. The contribution of these urban emissions to total PM10 concentrations was estimated by calculating the so-called “urban impact”, which was found to be 32.7 ± 18% (n = 392) in the case of PM10 mass concentrations. The investigated elements accounted on average for 31.3 ± 19% (n = 392) of the observed PM10 mass increase. The mean values for the “urban impacts” of individual elements varied between 25.5% (As) and 77.0% (Ba).     

Improved source assessment of Si, Al and related mineral components to PM10 based on a daily sampling procedure

Samples obtained from an industrialized valley in the East Alpine region were collected daily for a half year and analyzed using X-ray fluorescence to examine the elements Si,Al,Fe,Ca,Mg,Na,K,Zn,P,S and Cl.Some factors affecting the changes of these elements were considered,including time,elemental correlations,weekday,weekend and seasonal changes.Diagnostic analysis provided an insight into a decoupling behavior that occursin siliceous and carbonates minerals.A decrease in Si and Al and an increase in carbonates,Na,K,Zn and P were observed during the cold season.However,a consistently high correlation of Si and Al was observed in all seasons.It was established that such high levels originated from street surface abrasion.The increase in variability and absolute levels of carbonates during the cold season was demonstrated by adding carbonates to the street surface as gritting material to increase the grip on snowy surfaces.A marked increase in Na and Cl was observed in winter which may have been caused by thaw salt that is widely used in winter in Austria.This was associated with a significant increase in K,Zn,and P in the cold season that was the result of domestic space heating with wood.PM10 levels in December were 12 μg/m3 and were higher than levels detected in July.It was established that such high levels originated from mineral oxides,wood smoke,and inorganic ionic material(s).     

Annual migrations,diving behavior,and thermal biology of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tags were used to examine the biology of Atlantic bluefin tuna (Thunnus thynnus L.) on their breeding grounds in the Gulf of Mexico (GOM). The hypothesis that movement patterns, diving behavior, and thermal biology change during different stages of the breeding migration was tested. Mature Atlantic bluefin tuna tagged in the western Atlantic and the GOM, were on their breeding grounds from February to June for an average of 39 ± 11 days. The bluefin tuna experienced significantly warmer mean sea surface temperatures (SSTs) within the GOM (26.4 ± 1.6°C) than outside the GOM (20.2 ± 1.9°C). As the bluefin tuna entered and exited the GOM, the fish dove to daily maximum depths of 568 ± 50 and 580 ± 144 m, respectively, and exhibited directed movement paths to and from the localized breeding areas. During the putative breeding phase, the bluefin tuna had significantly shallower daily maximum depths (203 ± 76 m), and exhibited shallow oscillatory dives during the night. The movement paths of the bluefin tuna during the breeding phase were significantly more residential and sinuous. The heat transfer coefficients (K) were calculated for a bluefin tuna in the GOM using the recorded ambient and body temperatures. The K for this fish increased rapidly at the high ambient temperatures encountered in the GOM, and was significantly higher at night in the breeding phase when the fish was exhibiting shallow oscillatory dives. This suggests that the fish were behaviorally and physiologically thermoregulating in the Gulf of Mexico. This study demonstrates that the movement patterns, diving behavior, and thermal biology of Atlantic bluefin tuna change significantly at different stages of the breeding migration and can be used to define spawning location and timing. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Placental biopsy in the third trimester of pregnancy

Forty-two women with abnormal ultrasound findings after 27 weeks' gestation underwent a placental biopsy. In 39 cases, a karyotype was obtained from a direct preparation within 48 h, five abnormal karyotypes being detected (four trisomies and a triploidy). One confirmed placental mosaic was also detected. In one case, a small terminal deletion of chromosome 7 was not detected at the time due to the quality of the preparation. A karyotype can be obtained from a direct preparation in the third trimester in over 90 per cent of cases, the quality of the preparation allowing the reliable detection of abnormalities of chromosome number. We believe that this technique may be usefully, reliably, and safely employed in the third trimester of pregnancy by those with an interest in antenatal ultrasound diagnosis who do not have immediate access to a cytogenetics laboratory and who feel that cordocentesis is inappropriate for their situation.     

Some biologically important low molecular weight organic acids in the sediments of Loch Eil

The isolation of biologically important low molecular weight organic acids from organically enriched sediments in Loch Eil, Scotland, was carried out by extraction of pore water with acidified ethyl acetate. High concentrations of acetic acid, up to 1.8 mg g^-1 dry weight of sediment were found at Station E-24. Propionate, butyrate, valerate, lactate and traces of succinate were also found. Succinate was present in significant amounts, 42.2 g g^-1 dry weight of sediment at Station E-70, which received a higher input of organic matter than E-24. Both propionate and succinate were absent from a control station in the Lynn of Lorne where the sediment was low in carbon compared with Loch Eil. In experimental tanks, acetate levels increased as the input of organic carbon (as cellulose) was increased up to a load level of 1.5 g m^-2 day^-1. Above this, acetate decreased and succinate appeared. Succinate was not detected in low-loaded tanks. Experiments with sieved mud showed a vertical distribution of the different acids with depth. Lactate and succinate reached highest concentration in the 0 to 3 cm layer, acetate at 3 to 6 cm and propionate at 6 to 9 cm. The results are discussed in relation to the role of these acids as food sources and as indicators of biochemical pathways taking place in sediments with different carbon input levels.     

A prospective study of spontaneous miscarriage in ultrasonically normal pregnancies and relevance to chorion villus sampling

A total of 1068 patients were examined by ultrasound to ensure normality of pregnancy and followed prospectively from booking until 28 weeks. The spontaneous miscarriage rate was 2.7 per cent occuring within the first 16 weeks. Threatened miscarriage was associated with a 38 per cent fetal loss. Miscarriage was less likely as pregnancy advanced. The reduction in subsequent miscarriage rate before 11 weeks and from 11 weeks onwards is statistically significant (p<0.001). Gravidity, maternal age and a history of previous fetal loss did not contribute significantly to the miscarriage rate. Patients with a history of fetal loss were more likely to experience a threatened miscarriage. The relevance of these findings to chorion villus sampling is discussed.     

Preparation of high resolution chromosomes from amniotic fluid cells

A relatively simple method of obtaining high resolution chromosomes from amniotic fluid cells is described. The elongated chromosomes are achieved by adding ethidium bromide (5μg/ml) to the culture 4 1/2 hours before harvesting and the high resolution banding can be produced by usual banding procedures.