Spring water quality and usability in the Mount Cameroon area revealed by hydrogeochemistry

Groundwater is the only reliable water resource for drinking, domestic, and agricultural purposes for the people living in the Mount Cameroon area. Hydrogeochemical and R-mode factor analysis were used to identify hydrogeochemical processes controlling spring water quality and assess its usability for the above uses. Main water types in the study area are Ca-Mg-HCO(3) and Na-HCO(3). This study reveals that three processes are controlling the spring water quality. CO(2)-driven silicate weathering and reverse cation exchange are the most important processes affecting the hydrochemistry of the spring waters. While tropical oceanic monsoon chloride-rich/sulfate-rich rainwater seems to affect spring water chemistry at low-altitude areas, strong correlations exist between major ions, dissolved silica and the altitude of springs. In general, the spring waters are suitable for drinking and domestic uses. Total hardness (TH) values indicate a general softness of the waters, which is linked to the development of cardiovascular diseases. Based on Na?%, residual sodium carbonate, sodium adsorption ratio, and the USSL classification, the spring waters are considered suitable for irrigation. Though there is wide spread use of chemical fertilizers and intense urban settlements at the lower flanks of the volcano, anthropogenic activities for now seem to have little impact on the spring water quality.     

Impact of FEBRA (fermented brown rice with Aspergillus oryzae) intake and concentrations of PCDDs, PCDFs and PCBs in blood of humans from Japan

Impact of FEBRA (fermented brown rice with Aspergillus oryzae, a rich dietary fiber) intake on the concentrations of polychlorinated-biphenyls (PCBs), -dioxin-like polychlorinated biphenyls (DLPCBs), -dibenzo-p-dioxins (PCDDs), and -dibenzofurans (PCDFs) in blood of nine married Japanese were studied for 2 years. Concentrations of total PCBs (average+/-standard deviation) were greater 326,000+/-263,000 and 207,000+/-89,000 in FEBRA-intake and non-FEBRA-intake groups, respectively, on pg/g lipid (from now onwards data expressed on pg/g lipid). DLPCBs were second major contaminants 94,000+/-77,000 and 60,000+/-28,000, orderly in FEBRA-intake and non-FEBRA-intake groups. The concentrations of PCDD/DFs were several orders of magnitude lower than those of PCBs, whereas PCDDs were greater (433+/-233 and 512+/-511, in FEBRA-intake and non-FEBRA-intake groups, respectively) than PCDFs (56+/-50 and 43+/-35). Calculated toxic equivalency (TEQ) concentrations were 34+/-24 and 23+/-10 in FEBRA-intake and non-FEBRA-intake groups, respectively. In order to corroborate the impact of FEBRA, the changes of PCDD/DFs and PCB concentrations for 0.5-year, 1-year, 1.5-year, and 2-year samples were estimated from average concentration of 1-day before study commences and 1-week study samples. The results explicit FEBRA-intake group eliminated 7%, 33%, 45%, 36%, and 26% and non-FEBRA-intake group eliminated 8%, 28%, 36%, 31%, and 20% of DLPCBs, PCDDs, PCDFs, PCDD/DF TEQ and total TEQ, respectively. This study is the first of its kind showing the possible elimination of PCDDs, PCDFs and their TEQ in humans from Japan after the consumption of FEBRA.     

Biobased Epoxy/Layered Silicate Nanocomposites: Thermophysical Properties and Fracture Behavior Evaluation

The biobased epoxy containing epoxidized linseed oil (ELO) and its clay nanocomposites were processed with an anhydride curing agent. The certain amount of diglycidyl ether of bisphenol F (DGEBF) was replaced by ELO. The selection of the DGEBF, ELO, an anhydride curing agent, and organo-montmorillonite clay resulted in an excellent combination, to provide new biobased epoxy/clay nanocomposites showing high elastic modulus, high glass transition temperature, and high fracture toughness with larger amount of ELO. Izod impact strength was almost constant while changing the amount of ELO. This is a promising result for future applications in different engineering industries.     

Evaluation of groundwater quality and its suitability for drinking,domestic, and agricultural uses in the Banana Plain (Mbanga,Njombe, Penja) of the Cameroon Volcanic Line

Groundwater quality of the Banana Plain (Mbanga, Njombe, Penja—Cameroon) was assessed for its suitability for drinking, domestic, and agricultural uses. A total of 67 groundwater samples were collected from open wells, springs, and boreholes. Samples were analyzed for physicochemical properties, major ions, and dissolved silica. In 95% of groundwater samples, calcium is the dominant cation, while sodium dominates in 5% of the samples. Eighty percent of the samples have HCO₃ as major anion, and in 20%, NO₃ is the major anion. Main water types in the study area are CaHCO₃, CaMgHCO₃, CaNaHCO₃, and CaNaNO₃ClHCO₃. CO₂-driven weathering of silicate minerals followed by cation exchange seemingly controls largely the concentrations of major ions in the groundwaters of this area. Nitrate, sulfate, and chloride concentrations strongly express the impact of anthropogenic activities (agriculture and domestic activities) on groundwater quality. Sixty-four percent of the waters have nitrate concentrations higher than the drinking water limit. Also limiting groundwater use for potable and domestic purposes are contents of Ca²⁺, Mg²⁺ and HCO₃ ⁻ and total hardness (TH) that exceed World Health Organization (WHO) standards. Irrigational suitability of groundwaters in the study area was also evaluated, and results show that all the samples are fit for irrigation. Groundwater quality in the Banana Plain is impeded by natural geology and anthropogenic activities, and proper groundwater management strategies are necessary to protect sustainably this valuable resource.     

The utility of electrocardiography and echocardiography in copper deficiency-induced cardiac damage in goats

Environmental Science and Pollution Research - Copper deficiency (CuD) is a common mineral disorder in ruminants, which causes histomorphological changes in the heart due to disturbances in...     

Investigation and modeling of diurnal variation in suburban ambient formaldehyde concentration

Environmental Science and Pollution Research - Formaldehyde (HCHO) is a naturally occurring compound found in ambient air which can induce cancer and sick-building syndrome. It plays an important...     

Contamination,dynamics, and health risk assessment of pesticides in seawater and marine samples from the Seto Inland Sea,Japan

Environmental Science and Pollution Research - We assessed the contamination, dynamics, and health risks of the pesticides cyanazine, simetryn, fenarimol, isoprothiolane, diazinon, irgarol,...     

Photodegradation characteristics of PPCPs in water with UV treatment

The degradation characteristics of PPCPs commonly found in surface water under UV treatment were examined for 30 kinds of PPCPs using a UV/Lamp1 that emits light at a wavelength of 254 nm and a UV/Lamp2 that emits light at 254 nm and 185 nm in pure water. When a UV dose of some 230 mJ/cm² was introduced to the 30 PPCPs, photodegradation rates of about > 3% (theophylline) to 100% (diclofenac) and about > 15% (clarithromycin) to 100% (diclofenac) were observed for UV/Lamp1 and UV/Lamp2, respectively. This study also showed that UV/Lamp2, which photolyzes water molecules and generates OH radicals, is more effective for PPCP removal than UV/lamp1. It was postulated that the degradation rates of sulfamethoxazole, sulfamonomethoxine, sulfadimethoxine and sulfadimidine, all, including sulfamethoxazole, derived from sulfanilamide, under UV/Lamp1 resulted mainly from the bond-breaking reactions occurring between –SO₂– and its side atoms, the C–S bond and the N–H bond. Some PPCPs with amide bonds, such as cyclophosphamide and DEET, were highly resistant to photodegradation by UV/Lamp1. AOPs (Advanced oxidation processes) such as the UV/H₂O₂ or UV/O₃ processes should therefore be considered for their potential to remove these substances effectively.     

Development of extraction method of pharmaceuticals and their occurrences found in Japanese wastewater treatment plants

In this study, occurrence of 66 PPCPs (pharmaceuticals and personal care products) in liquid and solid phases of sewage sludge was elucidated. The extraction methods for the PPCPs from sludge were newly developed employing Pressurized Liquid Extraction (PLE) and Ultrasonic Solvent Extraction (USE). As an appropriate method, PLE using water (pH2), PLE using methanol (pH4), and USE using mixture of methanol and water (1/9,v/v, pH11) was found most effective because total recovery of most of the PPCPs indicated 40 to 130%. The developed extraction method with previously developed method for liquid phase analysis was applied to field survey at wastewater treatment plants (WWTPs) in Japan. 56 compounds were detected from the primary sludge and 61 compounds were detected from the excess sludge. The concentration was ranged between several ng/g and several μg/g. Solid-water distribution coefficient (Log K_d) ranged between 0.9 L/kg (Caffeine) and 3.7 L/kg (Levofloxacin) for primary sludge and between 1.4 L/kg (Sulpirid) and 4.3 L/kg (Mefenamic acid) for excess sludge.     

An improved method for Kr analysis by liquid scintillation counting and its application to atmospheric Kr determination

Atmospheric ⁸⁵Kr concentration at Fukuoka, Japan was determined by an improved ⁸⁵Kr analytical method using liquid scintillation counting (LSC). An average value of 1.54 ± 0.05 Bq m⁻³ was observed in 2008, which is about two times that measured in 1981 at Fukuoka, indicating a 29 mBq y⁻¹ rate of increase as an average for these 27 years. The analytical method developed involves collecting Kr from air using activated charcoal at liquid N₂ temperature and purifying it using He at dry ice temperature, followed by Kr separation by gas chromatography. An overall Kr recovery of 76.4 ± 8.1% was achieved when Kr was analyzed in 500-1000 l of air. The Kr isolated by gas chromatography was collected on silica gel in a quartz glass vial cooled to liquid N₂ temperature and the activity of ⁸⁵Kr was measured with a low-background LS counter. The detection limit of ⁸⁵Kr activity by the present analytical method is 0.0015 Bq at a 95% confidence level, including all propagation errors, which is equivalent with ⁸⁵Kr in 1.3 l of the present air under the analytical conditions of 72.1% counting efficiency, 0.1597 cps background count rate, and 76.4% Kr recovery.