Severe leaching of calcium ions from fir needles caused by acid fog

We have measured the components of the throughfall under fir trees (Abies firma) in the field around Mt. Oyama, where the forest appears to be declining, for the period 1994-1998. Exposure experiments of a simulated acid fog to fir twigs were performed under field conditions. There was a similarity between the acid response in the field and that in the laboratory. In both studies, the severe leaching of calcium ions from the needle surface was caused by exposure to acid fog. We also applied acid fog to fir seedlings over 1 year and observed a decrease in the growth of the seedlings due to this application in the dormant season. These results suggest that the severe leaching of calcium ions due to acid fog may cause the deficiency of calcium and be responsible for the decline of the fir trees.     

Removal of polychlorinated biphenyls from capacitors and pressure-sensitive paper by vacuum thermal recycling

This paper describes a new vacuum thermal recycling (VTR) method for treating discarded polychlorinated biphenyls (PCB)-contaminated capacitors and pressure-sensitive paper. Based on results demonstrating an exceptionally high PCB separation efficiency and recovery ratio from capacitors containing high-concentration PCBs, i.e. > 99.9%, respectively, the presented VTR method is verified to effectively remove PCBs. In addition, associated safety aspects of the employed procedure were confirmed.     

氢气爆炸特性研究

本文研究、总结了氢气与空气(氢气与氧气)的混合物的爆炸特性.即氢气在空气中,在比较低燃烧界限的情况下,只有向上的传播和非常少的超压可以观测得到.正因为氢气的这种特性,将氢应用于科技将极大地推进社会进步,氢燃料将成为一种主要的能源.然而,氢技术应用的成功与否主要取决于氢使用的安全性.所以,必须掌握实际使用时氢气燃烧的性能.本文在日本过去十年实验数据的基础上,通过实验研究了氢气与空气混合物的燃点.研究了氢气、氧气混合物经氮气稀释后,按化学当量比例将不同浓度的氢气与空气进行混合,并得出了低温下的爆炸压力特性.随后,分别讨论了在初始压力下一致的情况下,试管直径相同的状况下,氢气与空气混合浓度相同的情况下,这三种爆轰传播限制之间的关系.得出了在空气中直接点燃的发生爆轰的最小试管直径,最小的装药量之间的关系,进行了爆轰危险性分级.最后,文章概括比较了氢与其他燃料的燃烧特性,评估了氢气燃烧过程中的危险与安全因素.     

ALTERNATIVE MODELS FOR ESTIMATING THE TIME SERIES COMPONENTS OF WATER CONSUMPTION DATA1

ABSTRACT: Understanding the behavior of different time-series components of water consumption data is essential for a more effective analysis of economic incentive effects of alternative policy measures and also closer integration of water supply and demand management. Additive and multiplicative models are used to analyze the trend (T), cyclical (C), seasonal (S) and irregular (I) components. The stepwise regression method was applied to 187 data points (January 1960 to July 1975), each representing average daily water consumption within the service area of the Honolulu Board of Water Supply. Although statistically similar results (R² 0.95 and 0.96 and respective corresponding F-ratios 277 and 307) might suggest little difference in model performances, closer analysis of the results point to important multiplicative effects which should be taken into account in both short-run and long-run analyses.     

Development of a catalytic dehalogenation (Cl,Br) process for municipal waste plastic-derived oil

Dehalogenation is a key technology in the feedstock recycling of mixed halogenated waste plastics. In this study, two different methods were used to clarify the effectiveness of our proposed catalytic dehalogenation process using various carbon composites of iron oxides and calcium carbonate as the catalyst/sorbent. The first approach (a two-step process) was to develop a process for the thermal degradation of mixed halogenated waste plastics, and also develop dehalogenation catalysts for the catalytic dehydrochlorination of organic chlorine compounds from mixed plastic-derived oil containing polyvinyl chloride (PVC) using a fixed-bed flow-type reactor. The second approach (a single-step process) was the simultaneous degradation and dehalogenation of chlorinated (PVC) and brominated (plastic containing brominated flame retardant, HIPS–Br) mixed plastics into halogen-free liquid products. We report on a catalytic dehalogenation process for the chlorinated and brominated organic compounds formed by the pyrolysis of PVC and brominated flame retardant (HIPS–Br) mixed waste plastics [(polyethylene (PE), polypropylene (PP), and polystyrene (PS)], and also other plastics. During dehydrohalogenation, the iron- and calcium-based catalysts were transformed into their corresponding halides, which are also very active in the dehydrohalogenation of organic halogenated compounds. The halogen-free plastic-derived oil (PDO) can be used as a fuel oil or feedstock in refineries.     

Waste plastics recycling process using coke ovens

The Japan Iron and Steel Federation (JISF), as its voluntary energy-saving action plan, proposed a 10% energy reduction by 2010 with 1990 as the basis. Further, it has suggested an additional 1.5% energy saving by the use of waste plastics as a metallurgical raw material. The amount of processing of waste plastics which corresponds to this amount of energy conversion is about 1 million t scale during 1 year. Conventional known methods for recycle-processing of waste plastics include, for example, the method of injection into a blast furnace to use waste plastics as an iron-ore reducing agent instead of coal. On the other hand, the coking process is considered to be suitable as a waste plastic recycling facility because the process involves coal carbonization in a high-temperature and reducing atmosphere. Carbonization tests with mixed waste plastics were conducted with laboratory equipment and in actual coke ovens. As a result, it was confirmed that the waste plastics recycling process using coke ovens is feasible. Therefore, a waste plastics recycling process using coke ovens was started as a chemical recycling technology at Nippon Steel.     

Unique bioconcentration characteristics of new aryl fluoroalkyl ethers in common carp (Cyprinus carpio)

The bioconcentration factors (BCFs) of seven new aryl fluoroalkyl ethers--four bis-4-tetrafluoroethoxyphenyl-type (bis-type) compounds and three mono-4-tetrafluoroethoxyphenyl-type (mono-type) compounds--were obtained by bioconcentration tests using common carp. The BCFs of 4 of the 7 ethers were higher than 5000, indicating their high bioconcentration potential. The bioconcentration characteristics of the bis-type compounds were different from those of the mono-type compounds and non-fluoro diphenylmethanes with a similar skeleton structure to the bis-type compounds, in taking longer to reach a plateau and having a slower elimination rate and in their distribution patterns in the fish body. The BCF of 1 bis-type compound was much higher than the value predicted by an accepted correlation equation between BCF and P(ow). In addition, the logP(ow) of the bis-type compounds calculated by commercially available computer software was remarkably different from that measured.     

Impact of fermented brown rice with Aspergillus oryzae (FEBRA) intake and concentrations of polybrominated diphenylethers (PBDEs) in blood of humans from Japan

The isotope dilution technique was applied for the analysis of new polybrominated diphenylethers (PBDEs) calibration standard (both labeled and non-labeled) using high-resolution gas chromatography-high-resolution mass spectrometry (HRGC-HRMS). The relative response factor (RRF) and relative standard deviation (RSD) for new calibration standard in Finnigan Thermo Electron (MAT-95XL) and Micromass (Autospec Ultima) were more or less identical with mean RRF (0.9882), RSD (0.0865) and CV% of (8.75). The results also revealed for DeBDE-209 quantification; labeled DeBDE-209 is essential. Furthermore, we recommend on column injection technique with a thin film instead of splitless injection in order to reduce the thermal degradation of DeBDE-209 and formation of octabromodibenzofurans (OBDF). Besides, analysis of human blood (n = 156) of FEBRA-intake and non-FEBRA-intake individuals elucidated frequent detection of eighteen PBDE congeners. The average PBDE concentrations in non-FEBRA intake and FEBRA-intake humans were 6000-11,000 (mean: 8400) and 5400-15,000 (mean: 9900) respectively on pg/g fat basis. Although FEBRA-intake individuals showed slightly greater PBDEs, computer-normalized concentrations of TeBDE-47 corroborate FEBRA-intake individual from four family showed reduced concentrations. The contamination profiles of PBDEs varied in between family, gender as well as geography. International comparison with predominant PBDE congener (TeBDE-47) prevailed lower levels in Japan when compared to Korea, Germany and USA nevertheless, congener specific profiles were different which is in accordance with different technical PBDE usage in between countries.     

Determination of persistent organic pollutants by gas chromatography/laser multiphoton ionization/time-of-flight mass spectrometry

An authentic mixture of polychlorinated biphenyls was measured using a short wide-bore capillary column for the group separation of major components present in an actual sample of Kanechlor. The limits of detection were improved by ca. 2 fold in comparison with those obtained using a conventional capillary column, since the retention time was reduced and the amount of analytes introduced into the mass spectrometer per unit time could be increased. On the other hand, surface-water and sediment samples containing polycyclic aromatic hydrocarbons (PAHs) were collected from the river located in the vicinity of a waste water treatment plant. Even acenaphthylene, a minor component of the mixture could be measured for the sediment sample, and the concentrations were determined for several heavy PAHs. As demonstrated, a technique involving laser multiphoton ionization/time-of-flight mass spectrometry was useful as a sensitive and selective analytical tool for the trace analysis of persistent organic pollutants in an environmental sample.     

Performance tests of newly developed adsorption/plasma combined system for decomposition of volatile organic compounds under continuous flow condition

The adsorption/plasma decomposition with the combination of adsorption honeycomb-sheets and a plasma element is a new technology for small-sized apparatuses to decompose volatile organic compounds (VOCs) at concentrations lower than about 100 ppm. The feasibility of the prototype adsorption/plasma decomposition apparatus was evaluated with the simulated exhausts containing one VOC component and with real exhausts from a painting booth and an adhesion factory. The apparatus decomposed VOCs e ectively at the painting booth exhaust but not always satisfactorily at the adhesion factory exhaust. The performance test results with real exhausts were discussed with respect to the concentration and discharge pattern of the exhausts and the basic properties of the system such as cooperation of adsorption and plasma reaction and the concentration dependence of the performance.