Environmental impact evaluation of feeds prepared from food residues using life cycle assessment

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.     

Influence of dispersants on bioconcentration factors of seven organic compounds with different lipophilicities and structures

Seven compounds with different lipophilicities and structures—1,3,5-trichlorobenzene, pentachlorobenzene, acenaphthylene, 1,4-dimethyl-2-(1-methylphenyl)benzene, 4-ethylbiphenyl, 4,4′-dibromobiphenyl, and 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—were subjected to bioconcentration tests in carp at concentrations below the water solubilities of the compounds in the presence or absence of a dispersant (either an organic solvent or a surfactant). The bioconcentration factors (BCFs) of the compounds were on the order of 10²–10⁴. The BCF values remained in the range of 15–49% for all the compounds, whether or not a dispersant was present, i.e., the BCF values in the presence of an organic solvent or a surfactant at a concentration below the critical micelle concentration were not significantly smaller than the BCF values in the absence of the solvent or surfactant. This result indicates that the dispersants had no influence on the evaluation of the bioconcentration potential of these test substances.     

Study on the early stage of runaway reaction using Dewar vessels

In this paper, compared with a UN cylindrical 500 mL Dewar (H.4 in the UN tests), a spherical 1 L Dewar vessel was used to study the early stages of runaway reactions of several liquid and solid samples, including three organic peroxides and a reactive material. The samples were filled in the vessels and the temperature profiles versus times at different positions of the samples were measured. As a result, the minimum temperatures, defined as the SADT, were averagely 10 K lower than those measured in the cylindrical Dewar vessels. At the same time, the temperature profiles of solids in the spherical Dewars tended to be homogeneous. The heat transfer coefficient of a spherical Dewar is only 0.18 W/K/m, one-eighth of a conventional cylindrical Dewar vessel. Meanwhile it has a low phi factor. These factors are essential to simulate low heat loss bulk conditions in the equilibrium process and at the early stage of a runaway reaction. To characterize the ability of the adiabaticity of a storage vessel, it can be seen that a spherical Dewar could simulate the plant process having critical storage size of a reactive-material, r₀, approximately 0.6 m. It is recommended that such a technique is used to investigate the SADT of an unstable material in larger scale packaging or a material with very weak heat release in industry.     

联合国建议的固体氧化物燃烧测试方法的研究

由于日本消防法中固体氧化物的燃烧试验方法,与联合国黄皮书中所建议的试验方法有所不同,在实际应用中经常出现矛盾.因此,本文对其中的一些不同之处进行了重新的研究考察.并与日本海事检定协会和代表联合国标准测试方法的荷兰应用科学研究组织进行合作,对比研究了联合国建议的关于固体氧化物燃烧试验的方法.并就其中发现的问题提出了相应的改进意见.具体有以下4方面的措施:(1)纤维素种类对于燃烧时间的影响;(2)环境湿度及纤维素含水量对燃烧时间的影响;(3)导火线材料与导火线破裂方式出现的问题;(4)联合国建议中的举例数据.     

Synthese und biochemisches Verhalten von Idebenon und verwandten Verbindungen

Syntheses of some metabolites of ubiquinone and of related compounds are described. Idebenone (QSA-10), a methyl-dimethoxy-benzoquinone bearing an omega-hydroxydecyl side chain in 3-position, restored the oxidation of succinate and of NADH in ubiquinone-depleted mitochondrial preparations and showed a stabilizing effect on lysosomal membranes and an inhibitory effect on cAMP-phosphodiesterase. It inhibited lipid peroxidation in canine brain mitochondria and in microsomes from canine brain and rat liver. Administered orally to rats, it increased the respiratory control index for glutamate and succinate oxidation but had no effect on the ADP/O2 ratio. Pharmacological effects of idebenon are also briefly discussed.     

EMF effects on microcirculatory system

Authors review the importance of studying the effects of electromagnetic fields (EMF) on microcirculatory system, especially in respect of possibility that vasculature may have direct and indirect role in interaction of static magnetic fields (SMF). We outline the physiological importance of microcirculation and relatively new methods of evaluation technique in vivo and explain in details the local and/or whole body exposure effects of SMF with␣range of 0.3–180 mT, power frequency EMF with range of 0.1–30 mT and microwaves at 1.5 GHz with range 0.08–8 W/kg brain average specific absorption rate (SAR) on microcirculatory systems in different tissues in experimental animals.