Glycosylation of bisphenol A by freshwater microalgae

The endocrine disruptor bisphenol A (BPA, 4,4'-isopropylidenediphenol) is used to manufacture polycarbonate plastic and epoxy resin linings of food and beverage cans, and the residues from these products are then sometimes discharged into rivers and lakes in waste leachates. However, the fate of BPA in the environment has not yet been thoroughly elucidated. Considering the effect of BPA on aquatic organisms, it is important that we estimate the concentration of BPA and its metabolites in the aquatic environment, but there are few data on the metabolites of BPA. Here, we focused on freshwater microalgae as organisms that contribute to the biodegradation or biotransformation of BPA in aquatic environments. When we added BPA to cultures of eight species of freshwater microalgae, a reduction in the concentration of BPA in the culture medium was observed in all cultures. BPA was metabolized to BPA glycosides by Pseudokirchneriella subcapitata, Scenedesmus acutus, Scenedesmus quadricauda, and Coelastrum reticulatum, and these metabolites were then released into the culture medium. The metabolite from P. subcapitata, S. acutus, and C. reticulatum was identified by FAB-MS and (1)H-NMR as bisphenol A-mono-O-beta-d-glucopyranoside (BPAGlc), and another metabolite, from S. quadricauda, was identified as bisphenol A-mono-O-beta-d-galactopyranoside (BPAGal). These results demonstrate that freshwater microalgae that inhabit universal environments can metabolize BPA to its glycosides. Because BPA glycosides accumulate in plants and algae, and may be digested to BPA by beta-glycosidase in animal intestines, more attention should be given to levels of BPA glycosides in the environment to estimate the ecological impact of discharged BPA.     

Phytotoxicities of fluoranthene and phenanthrene deposited on needle surfaces of the evergreen conifer, Japanese red pine (Pinus densiflora Sieb. et Zucc.)

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied with respect to their carcinogenic and mutagenic effects on animals and human cells. Phenanthrene (PHE) and fluoranthene (FLU) effects on the needle photosynthetic traits of 2-year-old Japanese red pine (Pinus densiflora Sieb. et. Zucc.) seedlings were investigated. Three months after fumigation of foliage with solutions containing these PAHs (10 microM each), FLU had negative effects on net photosynthesis at near-saturating irradiance, stomatal conductance, initial chlorophyll fluorescence, and the contents of total chlorophyll, magnesium, and ribulose 1,5-bisphosphate carboxylase (rubisco) of current-year needles. PHE had similar negative effects to FLU but in lesser magnitude. The effects of the PAHs were mitigated by the addition of an OH-radical scavenger (mannitol) into the PAH solutions. PAHs deposited on the surface of pine needles may induce the generation of reactive oxygen species in the photosynthetic apparatus, a manner closely resembling the action of the herbicide paraquat.     

Radium geochemistry in Na-Cl type groundwater in Niigata Prefecture, Japan

Radium isotopes in 23 Na-Cl type groundwater sampled mainly from deep wells in Niigata Prefecture, which is the site of the largest oil- and gas-fields in Japan, were measured along with U isotopes, chemical components and hydrogen and oxygen isotope ratios to elucidate the distribution and behavior of Ra in a brackish environment underground. Also analyzed were U and Th isotopes in 38 rock samples collected from outcrops at 17 locations. Ra-226 concentrations (8.86-1637 mBq kg⁻¹) of groundwater samples roughly correlated with total dissolved solid (TDS) concentrations and other alkaline earth contents. Their ²²⁸Ra/²²⁶Ra activity ratios (0.32-5.2) were similar to or higher than the ²³²Th/²³⁸U activity ratios (0.6-1.7) in the rocks. The most likely transport mechanism of Ra isotopes into groundwater was due to their α-recoil from the solid phase, probably from the water-rock interface where Th isotopes had accumulated, and adsorption/desorption reaction based on the increase in ²²⁶Ra contents with TDS.     

Relationship between the riverine nitrate–nitrogen concentration and the land use in the Teshio River watershed, North Japan

The present research investigated the relationship between nitrate–nitrogen (NO₃–N) in river water and the land use/land cover (hereafter, land use) in the Teshio River watershed located in northern Hokkaido island to understand the effect of human activities such as agriculture, forestry, industry, and urbanization in the drainage basin on the river ecosystem quality and services. River water was sampled at nine points seasonally during a 2-year period and the nutrients concentration was measured. Land use profiles were estimated at two spatial scales, riparian and sub-catchment, for each sampling station. The spatial pattern of water quality in the Teshio River showed increased NO₃–N levels associated with agriculture and urban expansion, and forest reduction in the watershed. Land use at the riparian scale closely reflected that at the sub-catchment scale, which masked the unique riparian buffer effect on the river water condition. The increased agricultural and reduced forest area in the riparian zone, especially in the upper middle reach, could be a possible reason for a decline of ecosystem service for the provisioning of clean water and habitat for aquatic organisms. Measures towards sustainable and more nature-friendly agricultural management are necessary in the area to protect the Teshio River ecosystem and its ecosystem services.     

土壤中多环芳烃化合物的生物降解及监测

在实验室模拟条件下,研究芳香化合物菲污染土壤中的生物降解作用。结果表明,转基因工程菌对土壤中菲的生物降解有很好促进效果,在30d内约有50%的菲被降解。同时利用分子生物学技术对污染环境中转基因工程菌进行了追踪监测,发现添加菌的数量随时间的推移逐渐减少。     

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in the atmosphere and bulk deposition in Kyoto, Japan

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in atmosphere, bulk atmospheric deposition and soil in Kyoto, which is an urban city in Japan, were measured. Decabromodiphenyl ether (D(10)BDE, BDE-209) was detected in relatively high concentrations compared to other PBDE congeners in most samples. Similar results, in which D(10)BDE was predominantly detected, were reported in other studies in Japan. However, these homologue profiles differ from those of studies conducted in North America. The partitioning of semivolatile organic compounds between atmospheric gas phase and particulate-associated phase is an important factor in their environmental behavior. In this study, atmospheric particulate phase fraction (f(P)) of the brominated compounds increased with increasing bromine number, and f(P) was higher in samples collected in winter than in those collected in summer. Moreover, f(P) of PBDFs and MoBPXDFs was higher than that of PCDFs with the same halogen number. These results agree well with expectations from the vapor pressure of the brominated compounds and PCDD/Fs. Among the brominated compounds in the atmosphere, the level of MoBPXDD/Fs correlates positively with that of PCDD/Fs. This relationship has been previously observed in waste incineration samples. These results suggest that one of the sources of MoBPXDD/Fs in the atmosphere is incineration byproduct. The level of PBDD/Fs seems to correlate positively with that of PBDEs. This relationship suggest that the PBDD/Fs in the atmosphere relate to PBDEs, which is an impurity of PBDE products, or formed by the manufacture or combustion of plastics containing PBDEs.     

Evaluation of an electrolysis apparatus for inactivating antineoplastics in clinical wastewater

We recently reported a system for inactivating antineoplastics in which sodium hypochlorite is supplied by the electrolysis of sodium chloride solution. In this study, we designed an electrolysis apparatus for inactivating the cytotoxicity of antineoplastics in clinical wastewater using the system. The apparatus consists of an electrolysis cell with platinum-iridium electrodes, a pool tank, a circulating system for wastewater, a safety system for explosive gas and overflow, and an exhaust duct. The free chlorine concentration increased linearly up to 6500 mg l(-1), and pH also increased to 9.0-10.0 within 2h, when 0.9% sodium chloride solution was electrolyzed. We examined its efficacy with model and clinical wastewaters. The reciprocal of dilution factor for disappearance of cytotoxicity using Molt-4 cells was compared before and after electrolysis. In the model wastewater, that was 9.10 x 10(4) before electrolysis, and 3.56 x 10(2) after 2h of electrolysis. In the clinical wastewater (n=26), that was 6.90 x 10(3)-1.02 x 10(6) before electrolysis, and 1.08 x 10(2)-1.45 x 10(4) after 2h of electrolysis. Poisonous and explosive gases released by the electrolysis were measured; however, they were found to be negligible in terms of safety. The environmental load was evaluated by carbon dioxide generation as an index and it was found that the carbon dioxide generated by the electrolysis method was 1/70 lower than that by the dilution method with tap water. Moreover, the cost of the electrolysis method was 1/170 lower than that of the dilution method. This method was found to be both effective and economically valuable.     

Ionic imbalance due to hydrogen carbonate from Asian dust

In an attempt to identify the ionic imbalance, hydrogen carbonate, HCO₃⁻ (bicarbonate), was determined together with the commonly determined nine major ions because the imbalance was frequently encountered in the chemical analysis of samples with high pHs. Titration method was applied for the determination of the samples with pH higher than 5.6. These samples amounted to 102 of the 1536 samples collected in Hokkaido, Northern Japan, from April 1998 to December 2002. Of the 102 samples, 74 (Group A) showed an acceptable ion balance without including HCO₃⁻. In the other 28 (Group B), however, inclusion of HCO₃⁻ successfully improved the ion balance. These results suggested that hydrogen carbonate was a potential candidate for explaining the imbalance. The hydrogen carbonate concentrations showed a strong correlation with the corresponding non-sea salt calcium (nss-Ca²⁺) concentrations, which implied that hydrogen carbonate was derived from calcium carbonate particles incorporated into falling raindrops or cloud droplets. For Group A, the relationship between hydrogen carbonate and the nss-calcium ion concentration was very similar to that for commonly suspended particles in Hokkaido. On the other hand, Group B exhibited a stronger but significantly different correlation. To the samples of Group B, a back-trajectory analysis was applied to demonstrate that the samples were associated with aerosol travelling from Northern China or Mongolia, which indicated that alkaline aerosol affected the chemistry. In consideration of these findings, the current standard of the ion balance should be critically reviewed for modification in regard to the contribution of hydrogen carbonate not only in source areas but also in receptor areas of alkaline aerosol.     

Solubility parameters for determining optimal solvents for separating PVC from PVC-coated PET fibers

Poly(vinyl chloride) (PVC) in PVC-coated poly(ethylene terephthalate) (PET) fabrics can be separated through dissolution in a suitable solvent, leaving only the PET fibers. We investigated the solubility of PVC in 30 solvents using swelling tests. The results were compared with those obtained using the Hansen, Gutmann, Swain, E _T(30), and Kamlet–Taft parameters. For this purpose, Gaussian plots of the PVC swellability versus solubility parameter were used to decide the applicability of the solubility parameter system. Only Gutmann’s electron acceptor–donor parameter (AN + DN) and the Kamlet–Taft parameters β and π* could describe the PVC-solvent system satisfactorily. Tetrahydrofuran (THF), methyl ethyl ketone (MEK), N,N-dimethylformamide (DMF), cyclohexanone, and cyclopentanone were tested for separating PVC from PET at different temperatures. THF dissolved PVC at 20 °C, while cyclohexanone and cyclopentanone did so at 40 °C. Traces of PVC remained on the PET fibers when DMF was used. Complete dissolution of PVC was not achieved at any temperature with MEK. The present work shows that solubility parameters are a helpful tool for the search for suitable solvents. It shows also that solubility parameters have to be selected carefully, since their usefulness depends strongly on the polymer properties.