Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

Organizational issues for disseminating recycling technologies of carbon fiber-reinforced plastics in the Japanese industrial landscape

Journal of Material Cycles and Waste Management - Carbon fiber-reinforced plastics (CFRP) are used for structural materials in the aircraft and automotive industries due to their lightweight and...     

松嫩平原西部碱尘气溶胶的时段变化及其气候影响因素分析

利用耦合等离子体发射光谱测试技术(ICP-AES)对松嫩平原西部2003年7月到2004年5月间获得的大气总悬浮颗粒物(TSP)样品进行了元素分析,并结合气象资料和TSP质量浓度,初步确定了碱尘活动年际内的演变规律及其主要控制因素.结果表明,TSP质量浓度的高峰时段是早春,其元素总体浓度亦高于其它时段,其中Na元素浓度具有明显的高值,表明碱尘在该时段为TSP的主要成分;晚春时段区域沙尘影响加强,很难监测本地碱尘活动;夏季,碱尘的3种重要元素(Na、Ca、K)含量增加,表明夏季有碱尘活动,与TSP浓度偏高吻合;秋季,碱尘和区域沙尘的活动均减弱.影响碱尘活动的气候因子主要是风力、降水量、温度、日照和湿度,但不同时段其主导作用不同.     

Bacterial communities in different locations, seasons and segments of a dairy wastewater treatment system consisting of six segments

A dairy wastewater treatment system composed of the 1st segment (no aeration) equipped with a facility for the destruction of milk fat particles, four successive aerobic treatment segments with activated sludge and a final sludge settlement segment was developed. The activated sludge is circulated through the six segments by settling sediments (activated sludge) in the 6th segment and sending the sediments beck to the 1st and 2nd segments. Microbiota was examined using samples from the non-aerated 1st and aerated 2nd segments obtained from two farms using the same system in summer or winter. Principal component analysis showed that the change in microbiota from the 1st to 2nd segments concomitant with effective wastewater treatment is affected by the concentrations of activated sludge and organic matter (biological oxygen demand [BOD]), and dissolved oxygen (DO) content. Microbiota from five segments (1st and four successive aerobic segments) in one location was also examined. Although the activated sludge is circulating throughout all the segments, microbiota fluctuation was observed. The observed successive changes in microbiota reflected the changes in the concentrations of organic matter and other physicochemical conditions (such as DO), suggesting that the microbiota is flexibly changeable depending on the environmental condition in the segments. The genera Dechloromonas, Zoogloea and Leptothrix are frequently observed in this wastewater treatment system throughout the analyses of microbiota in this study.     

Environmental-economic models for total emission control of regional environmental pollution — input-output approach

This paper deals with a Leontief-type dynamic input-output analysis for total emission control of pollution. A dynamic input-output model can be described as a linear programming problem. In this paper an objective function to be minimized is chosen as the sum of pollutants emitted in a regional area throughout the planning period. It is assumed that consumption grows with a constant growth rate throughout the planning period. With this model, we can tell how to assign the elimination rate of pollutants to each production sector, under the constraint that the total emission standard is satisfied in each term of the planning period.     

Estrus cycle asynchrony in wild female chimpanzees, Pan troglodytes schweinfurthii

Although estrous synchrony has been reported in a number of mammalian species, most often among primates, methodological and analytical problems make it difficult to interpret these results. We developed a novel estrous synchrony index and employed a randomization procedure to analyze long-term observations of female chimpanzee (Pan troglodytes schweinfurthii) estrous cycles at the Mahale Mountains National Park, Tanzania. Our results revealed that female chimpanzees at Mahale avoid synchronizing their estrous periods with each other. We also found that birthrates decreased as the breeding sex ratio increased. We suggest that estrous asynchrony decreases female–female competition for mates. Asynchrony may also reduce the potential for male sexual coercion by nonpreferred mating partners.     

Simplified Fabrication of Optically Transparent Composites Reinforced with Nanostructured Chitin

Optically transparent films reinforced with micro to nano scale chitin particles were successfully developed in this study. Chitin composites based on micro scale particles which are larger than the optical wavelength do not cause light scattering provided that chitin particles are composed of nano structure networks which allow monomer impregnation and polymerization. This could lead a simplified process for fabricating transparent composites. The composites reinforced by the chitin micro particles not only retained the transparency of the plastic but also helped the effectiveness of its co-efficient of thermal expansion as similar to chitin nanofibers. Furthermore, chitin nanofibers transparent films are thermally stable against temperature as high as 200 °C for a long period of time. This could lead to number of important commercial applications, and is a significant move towards the sustainable utilization of marine bio-resources.