Hydroponic technique using waste concrete and ferronickel slag instead of fertilizer

Journal of Material Cycles and Waste Management - This paper presents whether some minerals in waste concrete and ferronickel slag are available for hydroponics instead of commercial fertilizer....     

Influence of physical properties of ammonium nitrate on the detonation behaviour of ANFO

In order to obtain a better understanding of the non-ideal detonation behaviour of ammonium nitrate based explosives, detonation velocities of ANFO (ammonium nitrate and fuel oil) prepared with different kinds of ammonium nitrate (AN) were measured in steel tubes. In this series of test six kinds of AN were used and the influence of the pore diameter, the pore volume and the particle diameter of the AN particle on the detonation velocity of ANFO was investigated.

It was found that the pore diameter and the pore volume had a strong influence on the detonation velocities of ANFO. In the case of ANFO samples which were prepared with AN that had the same pore diameter and the pore volume, when tested the highest detonation velocity (3.85 km/s) was observed when the smallest particle diameter (<0.85 mm) was used. This value corresponded to 75% of the ideal detonation velocity, which was theoretically predicted by the CHEETAH code with the JCZ3-EOS.

The 12 months aging showed the change of the detonation velocities of ANFO and the reaction of ANFO was influenced both by the physical and the chemical properties of AN particles and oil during the storage period.     

Occurrence of Viruses and Protozoa in Drinking Water Sources of Japan and Their Relationship to Indicator Microorganisms

A nationwide survey of viruses, protozoa, and indicator microorganisms in drinking water sources of Japan was conducted. Among 64 surface water samples collected from 16 drinking water treatment plants, 51 (80?%) samples were positive for at least one of the 11 pathogen types tested, including noroviruses of genogroups I (positive rate, 13?%) and II (2?%), human sapoviruses (5?%), human adenoviruses of serotypes 40 and 41 (39?%), Cryptosporidium oocysts (41?%), and Giardia cysts (36?%). Total coliforms, Escherichia coli, and F-specific coliphages were detected in 63 (98?%), 33 (52?%), and 17 (27?%) samples, respectively, and E. coli was judged to be the most suitable indicator of pathogen contamination of drinking water sources. Genogroup-specific real-time PCR for F-specific coliphages revealed the presence of F-specific RNA coliphages of animal genogroup I and human genogroups II and III in 13 (41?%), 12 (39?%), and 1 (3?%), respectively, of 31 plaques isolated.     

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Environmental impact evaluation of feeds prepared from food residues using life cycle assessment

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.     

Destruction of Chlorofluorocarbons in a Cement Kiln

Abstract

One of the thermal oxidation technologies recommended by the United Nations Environment Programme (UNEP) is destruction of chlorofluorocarbons (CFCs) in a cement kiln. The destruction of CFC12, CFC11 and CFC113 was studied in a cement kiln plant in actual commercial operation. CFCs were completely destroyed in the kiln under normal operating conditions. Hydrogen fluoride and hydrogen chloride generated by CFC decomposition were absorbed by cement materials. No formation of toxic ha-logenated organic compounds, such as polychlorinated dibenzo-p-dioxins or dibenzofurans (PCDDs/PCDFs), was observed in the CFC incineration.     

Element and mineral characterization of dust emission from the saline land at Songnen Plain, Northeastern China

Recent observations of Asian dust storms show an eastern expansion of the source area to degraded lands, where dust emissions have been little studied. The dust concentrations over the saline land of the western Songnen Plain (SSL), Northeastern China, are circumstantially higher than those from the northwestern Chinese deserts. These concentrations are sensitive to the surface soil conditions and wind velocity on the ground. The dust samples collected during dust storm events on the SSL contain abundant Na, Mg, Al, K, Ca, Fe and Ti, as well as toxic elements such as Cu, V, Zn and Ba. Individual particle analysis reveals that fine saline particles (< 10 μm in diameter) on the saline land, consisting largely of carbonate, halite and sulfate together with lithogenic minerals such as SiO₂ and aluminosilicate, are eventually uplifted during the interval from spring to autumn. The predominantly fine saline particles uplifted from the SSL are likely transported eastward by the winter monsoon circulation and westerlies. Recent degradation of saline lands in Northeastern China would not only increase the frequency of dust storm events in the downwind area, but also might change the chemical composition of the Asian dust emissions.