Optimal water and waste-load allocations in rivers using a fuzzy transformation technique: a case study

In this paper, a new methodology is developed for integrated allocation of water and waste-loads in river basins utilizing a fuzzy transformation method (FTM). The fuzzy transformation method is used to incorporate the existing uncertainties in model inputs. In the proposed methodology, the FTM, as a simulation model, is utilized in an optimization framework for constructing a fuzzy water and waste-loads allocation model. In addition, economic as well as environmental impacts of water allocation to different water users are considered. For equitable water and waste load allocation, all possible coalition of water users are considered and total benefit of each coalition, which is a fuzzy number, is reallocated to water users who are participating in the coalition. The fuzzy cost savings are reallocated using a fuzzy nucleolus cooperative game and the FTM. As a case study, the Dez River system in south-west of Iran is modeled and analyzed using the methodology developed here. The results show the effectiveness of the methodology in optimal water and waste-loads allocations under uncertainty.     

Optimizing different adaptive strategies by using crop growth modeling under IPCC climate change scenarios for sustainable wheat production

Environment, Development and Sustainability - Crop production is highly sensitive to climate. It is affected by long-term trends in average rainfall and temperature, inter-annual climate...     

Hydraulics Near Unscreened Diversion Pipes in Open Channels: Large Flume Experiments

Most of the water diversions on the Sacramento and San Joaquin Rivers (California, United States) and their tributaries are currently unscreened. These unscreened diversions are commonly used for irrigation and are potentially harmful to migrating and resident fishes. A large flume (test section: 18.29 m long, 3.05 m wide and 3.20 m high) was used to investigate the hydraulic fields near an unscreened water diversion under ecologically and hydraulically relevant diversion rates and channel flow characteristics. We investigated all combinations of three diversion rates (0.28, 0.42, and 0.57 m³/s) and three sweeping velocities (0.15, 0.38, and 0.61 m/s), with one additional test at 0.71 m³/s and 0.15 m/s. We measured the three‐dimensional velocity field at seven cross sections near a diversion pipe and constructed regression equations of the observed maximum velocities near the pipe. Because the velocity components in three directions (longitudinal, transverse, and vertical) were significantly greater near the diversion pipe inlet compared with those farther from it, they cannot be neglected in the modeling and design of fish guidance and protection devices for diversion pipes. Our results should be of great value in quantifying the hydraulic fields that are formed around fish guidance devices to design more effective protection for fishes from entrainment into unscreened water‐diversion pipes.     

Photolysis of pharmaceuticals and personal care products in the marine environment under simulated sunlight conditions: irradiation and identification

The photochemical fate of 16 pharmaceuticals and personal care products (PPCPs) found in the environment has been studied under controlled laboratory conditions applying a sunlight simulator. Aqueous samples containing PPCPs at environmentally relevant concentrations were extracted by solid-phase extraction (SPE) after irradiation. The exposed extracts were subsequently analysed by liquid chromatography combined with triple quadrupole mass spectrometry (HPLC-MS/MS) for studying the kinetics of photolytic transformations. Almost all exposed PPCPs appeared to react with a half-life time (τ _1/2) of less than 30 min. For ranitidine, sulfamethoxazole, diclofenac, warfarin, sulfamethoxazole and ciprofloxacin, τ_1/2 was found to be even less than 5 min. The structures of major photolysis products were determined using quadrupole-time-of-flight mass spectrometry (QToF) and spectroscopic data reported in the literature. For diclofenac, the transformation products carbazol-1-yl-acidic acid and 8-chloro-9H-carbazol-1-yl-acetic acid were identified based on the mass/charge ratio of protonated ions and their fragmentation pattern in negative electrospray ionization (ESI^?-QTOF). Irradiation of carbamazepine resulted in three known products: acridine, carbamazepine-10,11-epoxide, and 10,11-dihydro-10,11-dihydroxy-carbamazepine, whereas acetaminophen was photolytically transformed to 1-(2-amino-5 hydroxyphenyl) ethenone. These photochemical products were subsequently identified in seawater or fish samples collected at sites exposed to wastewater effluents on the Saudi Arabian coast of the Red Sea.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

Carbon dioxide emission in relation with irrigation and organic amendments from a sweet corn field

Soil moisture and organic matter level affects soil respiration and microbial activities, which in turn impact greenhouse gas (GHG) emissions. This study was conducted to evaluate the effect of irrigation levels (75% [deficit], 100% [full], and 125% [excess] of reference crop evapotranspiration requirements), and organic amendments (OA) type (chicken manure [CM] and bone meal [BM]) and OA application rates (0,168, 336 and 672 kg total N ha^?1) on (i) soil physical properties (bulk density, organic matter content and soil moisture content) and (ii) soil carbon dioxide (CO₂) emissions from a highly weathered tropical Hawai'ian soil. Carbon dioxide readings were consistently taken once or twice a week for the duration of the cropping season. A drip irrigation system was used to apply the appropriate amount of irrigation water to the treatment plots. Treatments were randomly selected and corresponding organic amendments were manually incorporated into the soil. Plots were cultivated with sweet corn (Zea mays ‘SS-16’). Soil moisture content within and below the rootzone was monitored using a TDR 300 soil moisture sensor (Spectrum Technologies, Inc., Plainfield, IL, USA) connected with 12 cm long prongs. Soil bulk density and organic matter content were determined at the end of the cropping season. Analysis of variance results revealed that OA type, rate, and their interaction had significant effect on soil CO₂ flux (P < 0.05). Among the OA rates, all CM mostly resulted in significantly higher soil CO₂ fluxes compared to BM and control treatment (p < 0.05). The two highest rates of BM treatment were not significantly different from the control with regard to soil CO₂ flux. In addition, organic amendments affected soil moisture dynamics during the crop growing season and organic matter content measured after the crop harvest. While additional studies are needed to further investigate the effect of irrigation levels on soil CO₂ flux, it is recommended that in order to minimize soil CO₂ emissions, BM soil amendments could be a potential option to reduce soil CO₂ fluxes from agricultural fields similar to the one used in this study.     

Quality of tube well water intended for irrigation and human consumption with special emphasis on arsenic contamination at the area of Punjab,Pakistan

In the present study, the tube well water quality and the associated health risks, emphasizing on arsenic contamination, were investigated in rural and urban samples from Tehsil Mailsi located in Punjab, Pakistan. Arsenic concentrations (μg/L) were ranged from 12 to 448.5 and which exceeded the WHO recommended limit (10 μg/L) in all cases. The calculated average daily dose (3.3 × 10^?0.4 to 1.2 × 10^?0.2 mg/kg day) and hazard quotient (1.1–40) reflected the potential health risk to local population due to tube well water consumption as drinking purpose. Sodium percent (Na%), sodium absorption ratio, residual sodium carbonate, Kelly’s index and magnesium absorption ratio were also determined to assess the suitability of tube well water for irrigation purpose. The resulting piper plot revealed the Na–Ca–HCO₃ type water chemistry of the area and generally alkaline environment. The spatial distribution of arsenic in the tube well waters pinpoints the significant contribution of anthropogenic activities to arsenic pollution. Nevertheless, different statistical tools, including principal component analysis, hierarchical cluster analysis and correlation matrices, revealed the contribution of both natural and anthropogenic activities and alkaline type of aquifers toward the high level of arsenic contamination.     

Degradation of petroleum hydrocarbons from bottom sludge of crude oil storage tanks using in-vessel composting followed by oxidation with hydrogen peroxide and Fenton

In this research the feasibility of aerated in-vessel composting process followed by chemical oxidation with H₂O₂ and Fenton for removal of petroleum hydrocarbons from oily sludge of crude oil storage tanks was investigated. The ratios of the sludge to immature compost were 1:0 (as abiotic control), 1:2, 1:4, 1:6, 1:8 and 1:10 (as dry basis) at a C:N:P ratio of 100:5:1 and 55 % moisture content for a period of 10 weeks. Six concentrations of H₂O₂ and Fenton were added to the compost mixture for a period of 24- and 48-h reaction times. Results showed that petroleum hydrocarbons removal in ratios of 1:2, 1:4, 1:6, 1:8 and 1:10 were 66.6, 73.2, 74.8, 80.2 and 79.9 %, respectively. The results of the abiotic experiments indicated that the main mechanism of hydrocarbon removal in the composting reactors was biological. The application of combined composting and chemical oxidation demonstrated a remarkable (about 88 %) overall removal. The study showed that in-vessel composting combined with chemical oxidation is a viable choice for the remediation of the sludge.