Recycling MSWI bottom and fly ash as raw materials for Portland cement

Municipal solid waste incineration (MSWI) ash is rich in heavy metals and salts. The disposal of MSWI ash without proper treatment may cause serious environmental problems. Recently, the local cement industry in Taiwan has played an important role in the management of solid wastes because it can utilize various kinds of wastes as either fuels or raw materials. The objective of this study is to assess the possibility of MSWI ash reuse as a raw material for cement production. The ash was first washed with water and acid to remove the chlorides, which could cause serious corrosion in the cement kiln. Various amounts of pre-washed ash were added to replace the clay component of the raw materials for cement production. The allowable limits of chloride in the fly ash and bottom ash were found to be 1.75% and 3.50% respectively. The results indicate that cement production can be a feasible alternative for MSWI ash management. It is also evident that the addition of either fly ash or bottom ash did not have any effect on the compressive strength of the clinker. Cement products conformed to the Chinese National Standard (CNS) of Type II Portland cement with one exception, the setting time of the clinker was much longer.     

Factors influencing on the bioaccessibility of polybrominated diphenyl ethers in size-specific dust from air conditioner filters

Size-specific concentrations and bioaccessibility of polybrominated diphenyl ethers (PBDEs) in dust from air conditioner filters were measured, and the factors influencing the PBDE bioaccessibility were determined. Generally, the PBDE concentrations increased with decreasing dust particle size, and BDE209 (deca-BDE) was generally the predominant congener. The bioaccessibility ranged from 20.3% to 50.8% for tri- to hepta-BDEs, and from 5.1% to 13.9% for BDE209 in dust fractions of varied particle size. The bioaccessibility of most PBDE congeners decreased with increasing dust particle size. The way of being of PBDE (adsorbed to dust surface or incorporated into polymers) in dust significantly influenced the bioaccessibility. There was a significant negative correlation between the tri- to hepta-BDE bioaccessibility and organic matter (OM) contents in dust. Furthermore, tri- to hepta-BDE bioaccessibility increased with increasing polarity of OMs, while with decreasing aromaticity of OMs. The tri- to hepta-BDE bioaccessibility significantly positively correlated with the surface areas and pore volumes of dust. Using multiple linear regression analysis, it was found that the OM contents and pore volumes of dust were the most important factors to influence the tri- to hepta-BDE bioaccessibility and they could be used to estimate the bioaccessibility of tri- to hepta-BDEs according to the following equation: bioaccessibility (%) = 45.05 − 0.49 × OM% + 1.79 × pore volume. However, BDE209 bioaccessibility did not correlate to any of these factors.     

Arsenic sorption by red mud-modified biochar produced from rice straw

Red mud-modified biochar (RM-BC) has been produced to be utilized as a novel adsorbent to remove As because it can effectively combine the beneficial features of red mud (rich metal oxide composition and porous structure) and biochar (large surface area and porous structure properties). SEM-EDS and XRD analyses demonstrated that red mud had loaded successfully on the surface of biochar. With the increasing of pH in solution, arsenate (As(V)) adsorption on RM-BC decreased while arsenite (As(III)) increased. Arsenate adsorption kinetics process on RM-BC fitted the pseudo-second-order model, while that of As(III) favored the Elovich model. All sorption isotherms produced superior fits with the Langmuir model. RM-BC exhibited improved As removal capabilities, with a maximum adsorption capacity (Q_max) for As(V) of 5923 μg g^?1, approximately ten times greater than that of the untreated BC (552.0 μg g^?1). Furthermore, it has been indicated that the adsorption of As(V) on RM-BC may be strongly associated with iron oxides (hematite and magnetite) and aluminum oxides (gibbsite) by X-ray absorption near-edge spectroscopy (XANES), which was possibly because of surface complexation and electrostatic interactions. RM-BC may be used as a valuable adsorbent for removing As in the environment due to the waste materials being relatively abundant.     

区域污染物总量控制绩效评估技术及动态化管理建议与对策研究（二）

首次指出了物元分析隶属函数及运算模型在区域污染物总量控制动态化管理中的应用.研究成果是对扬州市的10年污染物总量控制系统性、宏观性的展开,丰富了区域污染物总量控制的理论体系,且进一步表明：该成果不仅为污染物总量控制进行动态化、规范化管理提供了科学的技术支撑,也为促进区域经济结构调整和增长方式的转变,实施循环经济的决策提供了保障.     

Distribution and temporal trend of polybrominated diphenyl ethers in one Shanghai municipal landfill, China

The scarcity of information on polybrominated diphenyl ethers’ (PBDEs) flow in landfill restricts the life cycle analysis of PBDEs. In this study, eight PBDE congeners (BDEs 28, 47, 99, 100, 153, 154, 183, and 209) in topsoil, vegetation leaves, leachate, and municipal aged refuse collected from Shanghai Laogang Municipal Landfill (SLML) were investigated. The present study revealed elevated PBDE concentrations in topsoil and proved PBDE leakage from SLML and vegetation uptake. BDE-209 was the predominant congener, and this could be due to massive usage of deca-BDE mixture in Shanghai. ΣPBDE concentrations in leachates treated by reed wetland and A²/O process fell in the low end of the worldwide range. ΣPBDE concentrations in aged refuse samples rose from under 50 ng/g dw in 1989 to the range of 5,150–5,718 ng/g dw in 2002. PBDE concentrations increase in aged refuse samples throughout the 1990s into the 2000s paralleled municipal solid waste output from 1991 to 2002 in Shanghai. Exponential increase in BDE-209 concentration in aged refuse suggested the increasing market demands for deca-BDE mixture after 1990 in China. Notably, the inventory of PBDEs in SLML was 28.7 MT, and the doubling time of BDE-209 in aged refuse was calculated to be 1.6 year. SLML can be considered as a source of PBDE and one main recipient of PBDE as well, receiving inputs predominantly from the PBDE-containing waste. Priority should be given to formulate regulation on PBDEs and sorting work before landfill disposal.     

Stereoisomeric profiling of pharmaceuticals ibuprofen and iopromide in wastewater and river water, China

Stereoisomeric compositions can provide insights into sources, fate, and ecological risks of contaminants in the environment. In this study, stereoisomeric profiles of ibuprofen and iopromide were investigated in wastewater and receiving surface water of the Pearl River Delta, south China. The enantiomeric fraction (EF) of ibuprofen was 0.108–0.188 and 0.480, whereas the isomer ratio (IR) of iopromide was 1.426–1.673 and 1.737–1.898 in the influent and final effluent, respectively, suggesting stereoselective degradation occurred for both pharmaceuticals during wastewater treatment. Ibuprofen showed enantioselective degradation in the anaerobic, anoxic, and aerobic conditions, whereas iopromide displayed isomer-selective degradation only under the aerobic condition. In the river waters, the EF of ibuprofen was 0.130–0.327 and the IR of iopromide was 1.500–2.531. The results suggested that pharmaceuticals in the mainstream Pearl River were mainly from discharge of treated wastewater, whereas in the tributary rivers and urban canals, direct discharge of untreated wastewater represented a significant contribution. The IR of iopromide can be an applicable and efficient tracer for wastewater discharge in the environment.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.