颗粒污泥粒径的工程测定方法

厌氧反应器污泥粒径分布的测试方法目前主要有激光粒度分析、照相、沉降法和筛分法.快速方便的实用方法是筛分法,但筛分时需用缓冲剂,考察了分别用缓冲液和自来水作为冲洗介质的筛分结果.结果表明,作为现场应用自来水替代缓冲液是可行的,能够准确反映出污泥颗粒粒径变化的趋势,同时给出了试验测定方法和原则,确定了最佳污泥取样量为20 mL.     

饮用水生物处理中微生物量和活性的测定方法

微生物量和微生物活性是饮用水生物处理工艺设计与运行的重要参数。总结论述了适用于表示饮用水生物处理过程生物膜中微生物数量和活性的几种主要指标的测定方法。     

Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China

A detailed investigation was conducted to understand the contamination characteristics of a selected set of potentially toxic metals in Shanghai. The amount of Pb, Zn, Cu, Cr, Cd and Ni were determined from 273 soil/dust samples collected within urban area. The results indicated that concentration of all metals except Ni in soils was significant, and metal pollution was even severer in roadside dust. A series of metal spatial distribution maps were created through geostatistical analysis, and the pollution hotspots tended to associate with city core area, major road junctions, and the regions close to industrial zones. In attempt of identifying the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Pb, Zn and Cu mainly originated from traffic contaminants; soil Ni was associated with natural concentration; Cd largely came from point-sourced industrial pollution; and Cr, Ni in dust were mainly related to atmospheric deposition.     

环渤海湾诸河口水质现状的分析

根据对环渤海湾诸河口实地采集的12个水样进行的重金属、砷、总氮和总磷含量分析，发现环渤海湾诸河口水污染严重，多超过地表水V类标准，主要污染物质为Hg、N和P，其他污染物含量均在地表水H类标准以内。其中海河口处的Hg含量在20年间增加了10倍左右。诸河口水体中N和P含量均达到水体富营养化危险负荷，可见陆源污染是渤海湾富营养化日趋严重、赤潮日趋增多的主要原因。     

高岭土对不同污染物微滤过程的影响

本研究采用原子力显微镜(AFM)结合自制的膜探针以及Zeta电位仪通过分别测量不同有机污染物,即腐殖酸(HA)、牛血清蛋白(BSA)和海藻酸钠(SA)与微滤膜之间的粘附力以及相应污染物的Zeta电位,对高岭土在不同有机物微滤过程的影响进行了系统性研究。结果表明,高岭土对污染膜通量衰减的影响主要发生在膜过滤的初期阶段,其存在使HA污染膜的初期通量衰减幅度增加,BSA和SA污染膜的初期通量衰减幅度减缓;清洗后HA污染膜的通量恢复率降低,而BSA和SA污染膜的通量恢复率增大。而且,高岭土的存在使膜-HA之间的粘附力变大以及HA溶液的Zeta电位变小,膜-BSA、SA之间的粘附力变小以及相应污染物的Zeta电位都增大。因此,膜-污染物之间粘附力以及溶液的Zeta电位的变化可以指示膜污染的变化趋势。     

生物反应器填埋场产甲烷规律的模拟研究

生物反应器填埋场是一种新型的垃圾卫生填埋场,可以加速填埋场的稳定及甲烷的产生.通过模拟试验探讨了生物反应器填埋场在不同操作条件下的产甲烷情况及COD、pH值的变化趋势.试验证明较高的回灌频率有助于垃圾降解、产甲烷速率的升高及渗滤液中COD浓度的降低;污泥接种起缓冲作用,使垃圾的降解及产气速率更趋向平稳;甲烷的产生与COD的降低是同步进行的,因此可以通过COD的变化趋势来判断产甲烷情况.研究建立了反映垃圾含水率影响填埋场产甲烷的数学模型,该模型具有简便、直观、准确等优点.     

Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China

Emission of unintentionally produced persistent organic pollutants (Unintentional POPs), including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychorinated biphenyls (PCBs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were investigated in four typical iron ore sintering plants in China. The emission factors and annual mass releases of the Unintentional POPs were calculated. The results indicated that PCDFs contributed more than 60% to the overall toxic equivalent quantity (TEQ) values, while the contribution of the dl-PCBs is relatively low, and only in the range of 8-9%. The dominant congeners of PCDD/Fs and dl-PCBs contributing most to the total TEQ were 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126. With regard to the TEQ contributions, the most abundant homologues were PeCDFs and HxCDD/Fs, followed by PeCDDs and non-ortho dl-PCB, whereas HpCDD/Fs, OCDD/Fs and mono-ortho dl-PCBs almost made no contributions. Due to the massive use of recycled waste in the feeding materials, the average emission factor of PCDD/Fs and dl-PCBs of the four plants was 3.95 μg WHO-TEQ ton⁻¹. Based on the results, the annual release of PCDD/Fs and dl-PCBs in 2007-2009 were estimated to be 2070 g, 2212 g, and 2307 g WHO-TEQ, respectively.     

Fate and transformation of naphthylaminesulfonic azo dye Reactive Black 5 during wastewater treatment process

Certain aromatic amines generated by the decolorization of some azo dyes are not removed substantially by conventional anaerobic–aerobic biotreatment. These aromatic amines are potentially toxic and often released in the wastewater of industrial plants. In this study, the fate and transformation of the naphthylaminesulfonic azo dye Reactive Black 5 (RB5) during different phases of a sequencing batch reactor were investigated. The major products of RB5 decolorization during the anaerobic phase include 2-[(4-aminophenyl)sulfonyl]ethyl hydrogen sulfate (APSEHS) and 1-2-7-triamino-8-hydroxy-3-6-naphthalinedisulfate (TAHNDS). During the aerobic phase, APSEHS was hydrolyzed and produced 4-aminobenzenesulfonic acid, which was further degraded via dearomatization. TAHNDS was transformed rapidly via auto-oxidation into TAHNDS_DP-1 and TAHNDS_DP-2, which were not further removed by the activated sludge during the entire 30-day aerobic phase. In contrast, different behaviors of TAHNDS were observed during the anoxic phase. The transformation of TAHNDS was initiated either by deamination or desulfonation reaction. TAHNDS was then converted into 3,5-diamino-4-hydroxynaphthalene-2-sulfonic acid, which was subsequently removed via ring cleavage reaction under aerobic condition. In conclusion, complete degradation of TAHNDS by activated sludge occurs only during anoxic/aerobic processes instead of the conventional anaerobic/aerobic processes.     

定量风险评价中装置的选取方法与应用

介绍了一种对化工厂单元内所有装置进行定量化评估危险大小的方法,给出了对其中较大危险装置进行定量风险评价的选取标准.该选取方法同时考虑装置自身的危险特性和装置对单元周边区域的危险影响大小,采用计算公式得出每个装置的选择指数,根据指数大小判断是否选取该装置进行定量风险评价.最后,依照该方法对现有一个有5个装置的单元进行了选取分析与计算,得到了需要进行QRA的3个装置,结论与实际情况相符,表明该方法具有准确性和实用性.     

Size distributions of aerosol and water-soluble ions in Nanjing during a crop residual burning event

To investigate the impact on urban air pollution by crop residual burning outside Nanjing, aerosol concentration, pollution gas concentration, mass concentration, and water-soluble ion size distribution were observed during one event of November 4-9, 2010. Results show that the size distribution of aerosol concentration is bimodal on pollution days and normal days, with peak values at 60-70 and 200-300 nm, respectively. Aerosol concentration is 10⁴ cm^-3. nm^-1 on pollution days. The peak value of spectrum distribution of aerosol concentration on pollution days is 1.5-3.3 times higher than that on a normal day. Crop residual burning has a great impact on the concentration of fine particles. Diurnal variation of aerosol concentration is trimodal on pollution days and normal days, with peak values at 03:00, 09:00 and 19:00 local standard time. The first peak is impacted by meteorological elements, while the second and third peaks are due to human activities, such as rush hour traffic. Crop residual burning has the greatest impact on SO₂ concentration, followed by NO₂, O₃ is hardly affected. The impact of crop residual burning on fine particles (< 2.1 μm) is larger than on coarse particles (> 2.1 μm), thus ion concentration in fine particles is higher than that in coarse particles. Crop residual burning leads to similar increase in all ion components, thus it has a small impact on the water-soluble ions order. Crop residual burning has a strong impact on the size distribution of K⁺, Cl^-, Na⁺, and F^- and has a weak impact on the size distributions of NH₄⁺, Ca²⁺, NO₃^- and SO₄^2-.