Reduction of tar using cheap catalysts during sewage sludge gasification

Solid-fuel conversion or gasification study of sewage sludge and energy recovery has become increasingly important because energy recovery and climate change are emerging issues. Various types of catalysts, such as dolomite, steel slag and calcium oxide, were tested for tar reduction during the sewage sludge gasification process. For the experiments on sewage sludge gasification reactions and tar reduction using the catalysts, a fixed bed of laboratory-scale experimental apparatus was set up. The reactor was made of quartz glass using an electric muffle furnace. The sewage sludge samples used had moisture contents less than 6%. The experimental conditions were as follows: sample weight was 20 g and reaction time was 10 min, gasification reaction temperature was from 600 to 800°C, and the equivalence ratio was 0.2. The quantity of catalysts was 2–6 g, and temperatures of catalyst layers were 500–700°C. As the reaction temperature increased up to 800°C, the yields of gaseous products and liquid products increased, whereas char and tar products decreased, showing effects on gas product compositions. These results were considered to be due to the increase of the water-gas reaction and Boudouard reaction. In the case of experiments with catalysts, dolomite (4 g), steel slag (6 g) and calcium oxide (6 g) were used. When the temperature of catalysts increased, the weight of the tar produced decreased with different cracking performances by different catalysts. Reforming reactions were considered to occur on the surface of dolomite, steel slag and calcium oxide, causing cracking of the hydrocarbon structure, which eventually showed reduced tar generation.     

Effects of impervious cover on the surface water quality and aquatic ecosystem of the Kyeongan stream in South Korea

The extent of impervious cover in a watershed has been linked to the quality of an urban aquatic environment. The Kyeongan watershed in South Korea was investigated to evaluate the relationship between the total impervious area (TIA) and the aquatic ecosystem of the watershed, including water quality and aquatic life using a relatively high-resolution (0.4 m) image. The TIA was found to be approximately 12% of the watershed, which indicates that the quality of its environment was being adversely affected by it. For water quality, Pearson correlation analyses showed that all water quality parameters studied were found to be positively correlated with TIA at p < 0.01, except for nitrate (NO3-). In addition, the zone with a higher TIA was found to have worse water quality. Some water quality parameters, such as nitrite (NO2-), total phosphorus, and phosphate (PO4(3-)) were highly affected by discharges from wastewater treatment plants. Water quality data suggest that TIA could be used to predict the water quality of streams. For ecological parameters, the diatom index for organic pollution and trophic diatom index were found to be highly correlated with TIA, whereas physical habitat and benthic macroinvertebrates were poorly correlated with TIA. However, the results indicate that the extent of impervious cover can be a useful indicator for predicting the status of specific ecosystem of streams.     

Thermal Degradation and Kinetics of Alginate Polyurethane Hybrid Material Prepared from Alginic Acid as a Polyol

Alginate polyurethane hybrid materials are prepared by varying mole ratio of 2, 4-TDI as a di-isocyanate and alginic acid as a polyol in presence of dimethyl sulfoxide (DMSO) as a solvent. FT-IR and ¹³C one-dimensional (1D) solid state NMR (SSNMR) spectroscopy indicates that alginic acid is converted into alginate-polyurethane hybrid material via urethane linkage. Surface morphology of alginate-polyurethane hybrids changes by varying alginic acid: TDI ratio. The peak at near 221 °C in DSC thermogram of alginic acid (Alg) is shifted to higher temperature in alginate-polyurethane hybrid (Algpu1 and Algpu2). TGA study shows that alginate-polyurethane hybrid prepared using alginic acid: TDI = 1:1 (Algpu2) is more stable than alginic acid: TDI = 1:0.5 (Algpu1) at 300 °C. Kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive 1st order reactions. This study shows that thermal stability of alginate-polyurethane hybrid material was increased by adjusting mole ratio of 2, 4-TDI and alginic acid.     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume of dust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 μm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.

Implications: VOCs and particles have been of interest both in industrial field and public indoor spaces. In this study, a post cyclone (PoC) that utilizes a residual vortex from the mother cyclone was modified by inserting a flow guide and was applied to capture toluene vapor. The device of modified post-cyclone system can be used effectively in simultaneous treatment of gas-solid flow.     

Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.     

Metagenomic assessment of the microbial diversity in ground pork products from markets in the North Central Region of South Korea

The purpose of this study was to characterize the microbial community in ground pork using molecular approaches. Forty six ground pork products were purchased from local stores in the north central area of South Korea. Aerobic plate counts varied 4.23 ± 5.14 × 10⁵ CFU/g with the range between 5.00 × 10³ and 1.85 × 10⁶ CFU/g for ground pork samples. Four ground meat samples were further processed for metagenomic analysis. Pseudomonas species was the most relative abundant with a wide range occurring (1.72 to 77.7%) as part of the microbial genera in ground pork. Bacteria such as Carnobacterium, Yersinia, Photobacterium were also identified in ground pork. Despite the prominence of certain genera across all samples there was still extensive microbial diversity among ground pork products that originated from different slaughter houses and were processed in different markets. Such diversity indicates that designing interventions to extend shelf life may be hampered by the extensive variability in the microbial consortia associated with pork products. However, this diversity may be useful for developing microbial traceability signatures unique to a slaughter house or a particular market.     

Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Contamination of polychlorinated biphenyls and organochlorine pesticides in breast milk in Korea: Time-course variation,influencing factors,and exposure assessment

Breast milk is a noninvasive specimen to assess maternal and infant exposure to polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). In this study, 206 breast milk samples were collected from 87 participants during lactation, at <7, 15, 30, or 90 days postpartum in four cities in Korea. The total concentrations of PCBs (ΣPCB) and OCPs (ΣOCP) ranged from <LOQ to 84.0 (median: 12.1) ng g⁻¹ lipid weight and from <LOQ to 559 (median: 144) ng g⁻¹ lipid weight, respectively. The residue levels of these contaminants measured in our study were relatively lower than those reported for European, African and Asian populations. Within a month postpartum typically after day seven the levels of ΣPCB and ΣOCP significantly increased. Some OCP compounds were correlated with maternal age, BMI, parity, and delivery mode. Certain types of dietary habits such as seafood and noodle consumption were significantly associated with ΣPCB and ΣOCP. The estimated daily intakes (EDIs) of ΣPCB and ΣOCP were 45.2–127 ng kg⁻¹ bw day⁻¹ and 625–1259 ng kg⁻¹ bw day⁻¹ during lactation, respectively, which are lower than the threshold values proposed by the US EPA and Health Canada. The exposure of Korean infants to chlordanes via breast milk had a potential health risk which deserves further investigation.     

Prevalence of low chlorinated dibenzo-p-dioxin/dibenzofurans in human serum

Mono- to tri-chlorinated dibenzo-p-dioxin/dibenzofurans (DD/Fs) have not been studied as extensively as the 17 toxic 2,3,7,8-substituted congeners. In this study for the first time, mono- to octa-chlorinated DD/Fs were analyzed for seventy one human serum samples collected from incinerator workers as well as residents living near and far from the facility. The mean concentrations of ∑Cl_1–8DD/Fs and 17-toxic congeners were 1890 and 398 pg g^?1 lipid (11.9 TEQ pg g^?1 lipid), respectively. 2,3,4,7,8-PeCDF, 1,2,3,7,8-PeCDD, and 1,2,3,6,7,8-HxCDD were predominant congeners that accounted for more than 78% of the TEQ concentrations. The profile for polychlorinated dibenzo-p-dioxins (PCDDs) was dominated by the most chlorinated congener, OCDD (>58%), while decreasing concentrations with increasing degree of chlorination were seen for polychlorinated dibenzofurans (PCDFs); MoCDFs (>83%) and DiCDFs (>6%). ∑Cl_1–3DD/Fs accounted for 77% of the serum concentrations of ∑Cl_1–8DD/Fs. These findings confirm that human beings are exposed to a large amount of ∑Cl_1–3DD/Fs. Moreover, MoCDFs contributed more than 60% of the ∑Cl_1–8DD/Fs and was highly correlated with ∑Cl_1–8DD/Fs. Thus, 2-MoCDF could be a predictive indicator for ∑Cl_1–8DD/Fs (r_s = 0.96), and the combination of 2-MoCDF and OCDD could explain the 95.9% variation in the serum of ∑Cl_1–8DD/Fs. These results suggest that low chlorinated DD/Fs should be studied extensively until these low chlorinated congeners will have been elucidated for their toxicities.