The effects of different CCS technological scenarios on EU low-carbon generation mix

Carbon capture and storage technology (CCS), a technology to reduce the emissions in coal and gas power generation plants, will play an important role in the achievement of the European Union emissions reduction objective. In the European Union, energy policies are articulated around three different elements: measures to promote renewable energy technologies, the emissions certificates system and both energy-saving and energy-efficiency policies. The succession of directives and communications from the EU Commission on renewable technology generation share targets and the implementation of the European Emissions Market exemplify the serious EU commitment to a more environmentally friendly future. CCS technologies—together with RES technologies—are thus key to achieve the European emissions reduction target. Although the CCS commercial availability is not guaranteed—due to a slow technological development—some institutions, such as the Institute for Prospective Technological Studies, assume, for 2030 horizon, a quick development of this technology, growing until a maximum participation of an 18 % over the fossil fuels total generation. An eventual non-availability of these technologies in 2030 could increase the cost of this objective in a 70 %. Therefore, the achievement of pollutant emissions reduction targets depends on a correct design of the European generation technologies mix, which should include CCS technologies. Nevertheless, the uncertainty about the final costs and economic risk of these technologies makes a question about their future role to arise. This paper analyses the effects of different variations in the cost and risk of the CCS technologies (scenarios) over the European power technologies mix. The results confirm the need of the availability of these technologies in 2030, beyond the potential costs and risks of both options. The reason lies in the methodological approach of portfolio theory, which allows an analysis from an efficient portfolio point of view.     

Biodegradable chelating agents for industrial,domestic, and agricultural applications—a review

Aminopolycarboxylates, like ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA), are chelating agents widely used in several industrial, agricultural, and domestic applications. However, the fact that they are not biodegradable leads to the presence of considerable amounts in aquatic systems, with serious environmental consequences. The replacement of these compounds by biodegradable alternatives has been the object of study in the last three decades. This paper reviews the most relevant studies towards the use of environmentally friendly chelating agents in a large number of applications: oxidative bleaching, detergents and cleaning compositions, scale prevention and reduction, remediation of soils, agriculture, electroplating, waste treatment, and biocides. Nitrilotriacetic acid (NTA), ethylenediaminedisuccinic acid (EDDS), and iminodisuccinic acid (IDS) are the most commonly suggested to replace the nonbiodegradable chelating agents. Depending on the application, the requirements for metal complexation might differ. Metal chelation ability of the most promising compounds [NTA, EDDS, IDS, methylglycinediacetic acid (MGDA), l-glutamic acid N,N-diacetic acid (GLDA), ethylenediamine-N,N′-diglutaric acid (EDDG), ethylenediamine-N,N′-dimalonic acid (EDDM), 3-hydroxy-2,2-iminodisuccinic acid (HIDS), 2-hydroxyethyliminodiacetic acid (HEIDA), pyridine-2,6-dicarboxylic acid (PDA)] with Fe, Mn, Cu, Pb, Cd, Zn, Ca, and Mg was simulated by computer calculations. The advantages or disadvantages of each compound for the most important applications were discussed.     

Seasonal changes in daily precipitation extremes in mainland Portugal from 1941 to 2007

This study aims mostly at understanding seasonal variations in the intensity, frequency and duration of extreme precipitation events in mainland Portugal. For this purpose, selected precipitation indices that mainly focus on extremes were calculated at the seasonal scale for daily data recorded in the period 1941–2007 at 57 meteorological stations scattered across the area. These indices were explored for trends at the local and regional levels. The results show that there are marked changes in precipitation indices at the seasonal scale. Trends in spring and autumn precipitation have opposite signals. In spring, statistically significant drying trends are found together with a reduction in extremes. In autumn, wetting trends are detected for all indices, although overall they are not significant at the 5 % level. In addition, the relationship between seasonal extreme precipitation indices and atmospheric large-scale modes of low-frequency variability is analysed by means of a seasonal correlation analysis. Four modes of low-frequency variability are explored. Results confirm that, over mainland Portugal, the North Atlantic Oscillation is one of the most important teleconnection patterns in any season and the mode of variability that has the greatest influence on precipitation extremes in the area, particularly in the winter and autumn.     

Ecological and biological determinants of methylmercury accumulation in tropical coastal fish

This research investigated whether environmental conditions, biological fish characteristics and anthropogenic impacts influenced mercury (Hg) assimilation into the muscle tissue of two fish species from two Brazilian bays, Ilha Grande Bay and Guanabara Bay. Fish and superficial water were collected in different periods. Hg was determined by CV-AAS. Methylmercury (MeHg) was identified and quantified by ECD-GC. Chlorophyll a concentrations in the water column indicated that Ilha Grande Bay and Guanabara Bay were oligotrophic and eutrophic, respectively. Hg in fish ranged from 2.10 to 870.17 μg kg^?1 dry wt. in Ilha Grande Bay and 40.90 to 809.24 μg kg^?1 dry wt. in Guanabara Bay. Slight differences were found between the length-normalized Hg concentrations and its percent of Hg in a voracious predator from the bays. In Guanabara Bay, where the presence of a chlor-alkali plant causes Hg input, the iliophagous fish species showed the highest length-normalized Hg concentrations and the voracious predator the lowest. Iliophagous fish is consumed by voracious predator and, consequently, acts as their MeHg food supply. Iliophagous fish from Ilha Grande Bay presented a higher percent of MeHg (80.0 %) than specimens from Guanabara Bay (54.5 %). This fact suggests that more MeHg was transferred from iliophagous fish to voracious predator in Ilha Grande Bay. At Guanabara Bay, the bioproduction is greater than that at Ilha Grande Bay, presenting the highest biomass in it ecosystem, which may subsequently dilute Hg and reduce its availability to the biota; i.e., influencing in Hg and MeHg availability throughout the food chain. Consequently, more MeHg is available in the aquatic environment of Ilha Grande Bay.     

Former DDT factory in Pakistan revisited for remediation: severe DDT concentrations in soils and plants from within the area

A factory in Amman Garh near Nowshera, Khyber Pakhtunkhwa, Pakistan, produced dichlorodiphenyltrichloroethane (DDT) from 1963–1994. Consequently, earlier papers reported a soil contamination in the per mille range inside the former factory wall (88 m?×?106 m) and up to 10 mg/kg of DDT in the surroundings in 2005–2007. The site within the factory wall was remonitored systematically in 2011 to complement the earlier data as a prerequisite for remediation, to put them in exposure context in a population developing area, and to suggest and evaluate the optimal remediation technique for the site. The contamination was drastically higher than the earlier published data, and the sum of DDT and its metabolites (ΣDDT) was up to 65 % in the soil. Grasses, shrubs, and trees growing in this severely contaminated site had 50–450 mg/kg_dw of ΣDDT. Thus, people living nearby and husbandry as well as wild animals are heavily exposed to DDT. The semiarid climate favors wind drift and deposition of the pollutant. Additionally, DDT from products of herbivore animals feeding on the contaminated plants will enter the food web. To overcome the exposure and distribution of the DDT, the site within the factory wall was capped with 1.5 m of soil. This remediation technique represents the easiest and least expensive solution. Nevertheless, DDT can still evaporate or leach, and groundwater can rise in this flood-prone area and thereby become contaminated, especially because a binding layer is missing.     

Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

Solar photocatalytic treatment of landfill leachate using a solid mineral by-product as a catalyst

The treatment of municipal solid waste landfill leachate in a pilot plant made up of solar compound parabolic collectors, using a solid industrial titanium by-product (WTiO₂) containing TiO₂ and Fe(III) as a photocatalyst, was investigated. In the study evidence was found showing that the degradation performed with WTiO₂ was mainly due to the Fe provided by this by-product, instead of TiO₂. However, although TiO₂ had very little effect by itself, a synergistic effect was observed between Fe and TiO₂. The application of WTiO₂, which produced coupled photo-Fenton and heterogeneous catalysis reactions, achieved a surprisingly high depuration level (86% of COD removal), higher than that reached by photo-Fenton using commercial FeSO₄ (43%) in the same conditions. After the oxidation process the biodegradability and toxicity of the landfill leachate were studied. The results showed that the leachate biodegradability was substantially increased, at least in the first stages of the process, and again that WTiO₂ was more efficient than FeSO₄ in terms of increasing biodegradability.     

Empirical assessment of sustainable energy markets in the EU-28

Sustainable consumption and production policies have been developed by the EU as part of the United Nations 10-year framework programme on sustainable consumption and production. In this context, the study of energy consumption and production patterns might be especially relevant as the importance of energy input. This paper develops the Sustainable Energy Market Aggregated Index in the EU-28 that provides information about the achieved effects of sustainable consumption and production policies on energy efficiency, energy dependence, generation mix based on clean production technologies and competitive market structure. The results suggest that Denmark, Sweden, UK, Italy, the Netherlands have the better scores. Reinforcing measures are proposed for member states with the lowest results (Slovakia, Luxembourg, Estonia, Czech Republic and Belgium) in order to move towards more competitive energy markets.     

Circumpolar terrestrial arthropod monitoring: A review of ongoing activities,opportunities and challenges,with a focus on spiders

The terrestrial chapter of the Circumpolar Biodiversity Monitoring Programme (CBMP) has the potential to bring international multi-taxon, long-term monitoring together, but detailed fundamental species information for Arctic arthropods lags far behind that for vertebrates and plants. In this paper, we demonstrate this major challenge to the CBMP by focussing on spiders (Order: Araneae) as an example group. We collate available circumpolar data on the distribution of spiders and highlight the current monitoring opportunities and identify the key knowledge gaps to address before monitoring can become efficient. We found spider data to be more complete than data for other taxa, but still variable in quality and availability between Arctic regions, highlighting the need for greater international co-operation for baseline studies and data sharing. There is also a dearth of long-term datasets for spiders and other arthropod groups from which to assess status and trends of biodiversity. Therefore, baseline studies should be conducted at all monitoring stations and we make recommendations for the development of the CBMP in relation to terrestrial arthropods more generally.