Numerical model for a watering plan to wash out organic matter from the municipal solid waste incinerator bottom ash layer in closed system disposal facilities

Bottom ash from municipal solid waste incineration (MSWI) is a main type of waste that is landfilled in Japan. The long-term elution of organic matter from the MSWI bottom ash layers is a concern because maintenance and operational costs of leachate treatment facilities are high. In closed system disposal facilities (CSDFs), which have a roof to prevent rainfall from infiltrating into the waste layers, water must be supplied artificially and its quantity can be controlled. However, the quantity of water needed and how to apply it (the intensity, period and frequency) have not been clearly defined. In order to discuss an effective watering plan, this study proposes a new washout model to clarify a fundamental mechanism of total organic carbon (TOC) elution behavior from MSWI bottom ash layers. The washout model considers three phases: solid, immobile water and mobile water. The parameters, including two mass transfer coefficients of the solid-immobile water phases and immobile-mobile water phases, were determined by one-dimensional column experiments for about 2 years. The intensity, period and frequency of watering and other factors were discussed based on a numerical analysis using the above parameters. As a result, our washout model explained adequately the elution behavior of TOC from the MSWI bottom ash layer before carbonation occurred (pH approximately 8.3). The determined parameters and numerical analysis suggested that there is a possibility that the minimum amount of water needed for washing out TOC per unit weight of MSWI bottom ash layer could be determined, which depends on the two mass transfer coefficients and the depth of the MSWI bottom ash layer. Knowledge about the fundamental mechanism of the elution behavior of TOC from the MSWI bottom ash layer before carbonation occurs, clarified by this study, will help an effective watering plan in CSDFs.     

Centralization of dairy farming facilities for improved economics and environmental quality

In Japan, most farm animal excreta has been stored directly on farmland. Runoff from this storage has often caused water pollution. Biogasification is anticipated as an important technology to manage excreta properly, but complex problems hinder its introduction. Economic aspects of management have been especially difficult for dairy farmers. For this study, structural problems regarding introduction of biogasification into dairy farming were identified. Subsequently, a desirable system of dairy farming including biogasification was suggested, and an evaluation model of the financial balance was constructed. A case study using current financial balances of several systems of dairy farming was evaluated using the constructed model and actual data. The systems were based on several policy alternatives including the suggested system mentioned above. Results show that a farmer can obtain sufficient income from a system featuring centralization of dairy housing and biogasification facilities and coordinated management by over six farmers.     

Assessment of ozone effects on local rice cultivar by portable ozone fumigation system in Hanoi, Vietnam

This study examined the effects of troposphere ozone (O3) on rice by developing a portable ozone fumigation system and applied to the field in Hanoi, Vietnam. The system was nearly identical to the open top chamber but designed to easily and cheaply assess the O3 sensitivity of local agricultural crops in the actual field. The rice (Oryza sativa L.) was exposed to ozone during the flowering stage at peri-urban experimental site of Hanoi. The fumigation protocols covered five different levels, namely; non-filtered air (ambient) as the control treatment, 32, 62, 85 and 113 ppb in 7-h mean. It was found that observed impacts corresponded well to similar open-top chamber studies in other Asian countries. The methodology and the system left a large room for improvement and called for very careful interpretation and pre-conditions (e.g. low ambient O3 concentration). However, the portable O3 exposure in the field might open a door to the less developed countries to implement the phytotoxic risk assessment of the local agricultural species.     

Production of Poly(3-hydroxyalkanoate)s by Pseudomonas putida Cultivated in a Glycerol/Nonanoic Acid-Containing Medium

The biosynthesis of poly(3-hydroxyalkanoate) (PHA) by Pseudomonas putida (JCM6160) cultivated in a medium containing glycerol, nonanoic acid, or a glycerol/nonanoic acid mixture as the sole carbon sources was investigated. The PHA content was ~20 % when glycerol was the carbon source. This relatively low content can be attributed to the glycerol end-cap effect and the absence of enzymes that can directly synthesize PHA from acetyl CoA, which is the major metabolite of glycerol. Fatty acids, containing even numbered carbons, are synthesized from acetyl CoA, and they can be used as substrates for PHA synthesis. However, this process also results in decreasing PHA content as fatty acids are siphoned off into other pathways. However, addition of 5 mM nonanoic acid into a 20 mM glycerol-containing medium dramatically increased the PHA content in P. putida, which was 1.3 times larger than the sum of the values found when glycerol and nonanoic acid were each used as the sole carbon source. The PHA, synthesized in the glycerol/nonanoic acid medium, contains 3-hydroxy alkanoate units that have 5, 6, 7, 8, 9, or 10 carbons. The units that contain the even numbered carbons are derived from fatty acids that were produced from glycerol; whereas, the PHA units with the odd numbered carbons are derived from nonanoic acid. Pentanoate units were also found in the polyester derived from glycerol and nonanoic acid, and must have been synthesized indirectly via β-oxidation of nonanoic acid with the assistance of glycerol because pentanoate units were not found in PHA when P. putida was cultivated in the presence of only nonanoic acid.     

Influence of moisture content,particle size and forming temperature on productivity and quality of rice straw pellets

A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ?12 MJ/kg for the lower heating value, and >95% durability.     

Intracellular localization of vanadium in the fan worm Pseudopotamilla occelata

A very high level of vanadium was found to be contained in the polychaete worm Pseudopotamilla occelata collected in 1992–1993 from the Sanriku coast on the main island of Japan. The vanadium concentration (mean±SD=5500±1800 g g^-1 dry wt) in the worm's branchial crown which is composed of many bipinnate radioles was approximately 100 times higher than that (mean±SD=60±25 g g^-1 dry wt) in the trunk body. Electron probe X-ray microanalysis revealed that a large amount of vanadium was present in the outer potion of the epidermis of the bipinnate radiole. Analytical electron microscopy for a cryo-section of the bipinnate radioles indicated that vanadium was localized in electron-dense deposits in the apical portion of epidermal cells. From an examination of the fine structures, the locality of the electron-dense deposits were found to correspond to that of the apical vacuoles in the epidermal cells. It was concluded that most of the vanadium in P. occelata was contained in the vacuoles of the epidermal cells of the bipinnate radioles.     

The top-down mechanism for body-mass-abundance scaling

Scaling relationships between mean body masses and abundances of species in multitrophic communities continue to be a subject of intense research and debate. The top-down mechanism explored in this paper explains the frequently observed inverse linear relationship between body mass and abundance (i.e., constant biomass) in terms of a balancing of resource biomasses by behaviorally and evolutionarily adapting foragers, and the evolutionary response of resources to this foraging pressure. The mechanism is tested using an allometric, multitrophic community model with a complex food web structure. It is a statistical model describing the evolutionary and population dynamics of tens to hundreds of species in a uniform way. Particularities of the model are the detailed representation of the evolution and interaction of trophic traits to reproduce topological food web patterns, prey switching behavior modeled after experimental observations, and the evolutionary adaptation of attack rates. Model structure and design are discussed. For model states comparable to natural communities, we find that (1) the body-mass abundance scaling does not depend on the allometric scaling exponent of physiological rates in the form expected from the energetic equivalence rule or other bottom-up theories; (2) the scaling exponent of abundance as a function of body mass is approximately -1, independent of the allometric exponent for physiological rates assumed; (3) removal of top-down control destroys this pattern, and energetic equivalence is recovered. We conclude that the top-down mechanism is active in the model, and that it is a viable alternative to bottom-up mechanisms for controlling body-mass-abundance relations in natural communities.     

Environmental occurrence of nitrotriphenylene observed in airborne particulate matter

1- and 2-Nitrotriphenylenes were found in the airborne particulate matter extracts collected in central Tokyo between the winter of 1998 and the winter of 1999. In particular, we have identified and quantified nitrotriphenylenes in the airborne particulate matter extracts collected over four consecutive 6-h periods on 2 December 1999. The concentrations of 1- and 2-nitrotriphenylene ranged from 0.04 to 0.44 and from 0.02 to 0.47 ng/m3, respectively, and the concentrations in the airborne particulate matter extracts collected during the 18:00-24:00 h time period were the highest of the four collection periods. 1-Nitropyrene and 2-nitrofluoranthene were also identified and quantified in the four 6-h samples. Although the concentrations of 1- and 2-nitrotriphenylenes were not higher than that of 2-nitrofluoranthene except during the 18:00-24:00 h time period, the concentrations were much higher than that of 1-nitropyrene during the four collection periods.The higher concentrations of 1- and 2-nitrotriphenylenes during the 18:00-24:00 h time period are presumably responsible for the high reactivity of parent triphenylene with NO2/NO3/N2O5, and high stability of 1- and 2-nitrotriphenylenes toward O3 + O2. In addition, the observed isomer distribution of nitrotriphenylenes suggested that direct emission of nitrotriphenylenes is also a source as well as their atmospheric formation.     

Detection and average content levels of carcinogenic and mutagenic compounds from the particulates on diesel and gasoline engine mufflers

Carcinogenic and mutagenic compounds, which were extracted from the particulates that adhered to inner surfaces of diesel and gasoline engine mufflers, were quantified by the series method of Soxhlet extraction, liquid-liquid partition, thin-layer chromatography, and spectrofluorometry. Mutagenic activity of their neutral and acidic fractions was tested in the improved Ames assay by the preincubation method with Salmonella typhimurium TA98 in the presence and absence of metabolic activation system (S-9 mix). The average content levels (μg/g tar) of polycyclic aromatic hydrocarbons from gasoline engine cars were greater than those from diesel engine vehicles. However, the levels of nitro derivatives of PAHs and polycyclic quinones from the diesel engines were greater than from the gasoline engines. Mutagenic activity of the diesel acidic fraction was the highest among the diesel and gasoline fractions, and was significantly higher in the absence of the S-9 mix. Furthermore, the relative value (R_{c = 0}) of infrared absorption of carbonyl stretching vibration to that of methylene asymmetric stretching vibration of the diesel acidic fraction was the highest among the diesel and gasoline fractions. These results strongly suggest that highly direct-acting mutagens in the acidic fraction are at higher levels in diesel emission particulates than those from gasoline, and that these mutagens are carboxylic acid, aldehyde, and alcohol derivatives of PAHs and NPAHs.