Detection of antibiotics in chicken eggs obtained from supermarkets in Ho Chi Minh City,Vietnam

The residual levels of antibiotics in Vietnamese eggs were monitored from 2014 to 2015. A total of 111 egg packages, distributed by 11 different companies, were collected from supermarkets in Ho Chi Minh City and the levels of 28 antibiotics were analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening method. Sixteen samples tested positive for antibiotics; a total of eight compounds (enrofloxacin, ciprofloxacin, norfloxacin, sulfadimethoxine, sulfamethazine, sulfamonomethoxine, tilmicosin and trimethoprim) were detected. Enrofloxacin was detected in eight samples, with two samples exhibiting concentrations exceeding 1,000 µg kg^?1. Tilmicosin was detected in three samples at a range of 49–568 µg kg^?1. We observed that two of the 11 companies frequently sold antibiotic-contaminated eggs (detection rates of 56 and 60%), suggesting that a number of companies do not regulate the use of antibiotics in egg-laying hens. Our findings indicate that livestock farmers require instruction regarding antibiotic use and that continual antibiotic monitoring is essential in Vietnam.     

Leaching of brominated flame retardants from TV housing plastics in the presence of dissolved humic matter

In this study, we investigated the contents of several brominated compounds in TV molding plastics, as well as their leaching characteristics in the presence of DHM. The PBDE content was about 3% of the sample weight, and deca-BDE was the most abundant homologue, accounting for over 80% of the total amount. TBBPA, PBPs and PBBs content was 8100, 4700 and 250 ng/g, respectively. Despite no detection of most of the lower brominated DEs in distilled water, most homologues could be detected in DHM solution, and their solubility increased according to the contact time; those of highly brominated compounds increased to 10 times their maximum solubility in distilled water. Especially, contrary to the relatively faster equilibrium in distilled water, BFR solubility in DHM solution was maintained even after 20 days. In addition, a modified first-order model adequately reflected rapid desorption for each compound in the initial period, but slow desorption afterwards. From an overall perspective, it is clear that hydrophobic BFRs can leach out to a great extent in the presence of DHM, which is a matter of great concern in E&E waste as the potential contaminant source of BFRs, especially in landfills and open dump sites that provide the perfect conditions for exposure of BFRs to abundant DHM.     

Removal of PCDD/Fs from contaminated sediment and released effluent gas by charcoal in a proposed cost-effective thermal treatment process

A novel cost-effective thermal treatment technology has been proposed for the removal of PCDD/Fs from contaminated sediment and released effluent gas using charcoal as both an adsorbent and a thermal source. When a reactor was used for thermal treatment, the PCDD/Fs removal efficiency exceeded 98% from the sediment at the three different air superficial velocities employed in this study. The total PCDD/F international toxic equivalent (I-TEQ) contents, both in the treated sediments and effluent gas, were below the Japanese emission standard limit. Analysis of the PCDD/F contents in different fractions showed that large quantities of PCDDs but not PCDFs were evaporated from the sediment and adsorbed in the moist sediment column. This difference was attributed to the formation of PCDDs from pentachlorophenol (PCP) during the cooling process following the thermal treatment process in the reactor. This proposed thermal process provides a promising alternative to the conventional methods.     

Method of removal of volatile organic compounds by using wet scrubber coupled with photo-Fenton reaction - Preventing emission of by-products

The photo-Fenton reaction was applied as a novel method for the removal of volatile organic compounds (VOCs) in the gas phase, and its effectiveness was experimentally examined. In conventional VOCs removal methods using a photocatalyst or ozone, VOCs are oxidized in the gas phase. Therefore, incompletely oxidized intermediates, which may have adverse effects on health, are likely to contaminate the treated air. On the other hand, in the VOCs removal method developed in this study, because the VOCs are oxidized in the liquid phase by the photo-Fenton reaction, any incompletely oxidized intermediates produced are confined to the liquid phase. As a result, the contamination of the treated air by these harmful intermediates can be prevented. Using a semi-batch process, it was found that the removal efficiency for toluene in a one-pass test (residence time of 17 s) was 61%, for an inlet toluene gas concentration of 930 ppbv, an initial iron ion concentration of 20 mg L⁻¹, and an initial hydrogen peroxide concentration of 630 mg L⁻¹. The removal efficiency was almost constant as long as H₂O₂ was present in the solution. Proton transfer reaction mass spectrometry analysis confirmed the absence of any incompletely oxidized intermediates in the treated air.     

Design optimization and standardization of an environmental availability test under both acidic and alkaline conditions

The objective of this study was to design a procedure for an environmental availability test under both acidic and alkaline conditions for solid wastes and recycled materials and products. The procedure was designed on the basis of the Dutch availability test NEN 7371. Bottom ash from a municipal solid waste incinerator and copper slag were used as test materials. The influences of the type and intensity of liquid stirring apparatus and the open area ratio of the top of the leaching vessel were investigated experimentally, and partial least-squares modeling was applied as multivariate data analysis for the simultaneous evaluation of the three leaching conditions. Interlaboratory validation was then carried out with the participation of seven laboratories in accordance with JIS Z 8402-2/ISO 5725-2. Both repeatability and reproducibility were found to be acceptable, but precise calibration of the pH electrode is required. The proposed procedure will provide sufficient accuracy as a standard test method.     

Study of the effect of political measures on the citizen participation rate in recycling and on the environmental load reduction

Obtaining the cooperation of citizens to participate in separate waste collection is essential to create a recycling-oriented society. In this research, the degree of change in the citizen participation rate, which occurs when the contents of political measures such as the raising of awareness, provision of information, and the conditions of collection services were changed, was estimated together with the effect on the reduction in environmental load. A questionnaire survey was conducted, targeted at residents of Itabashi Ward, while logistic regression analyses were also conducted to create predictive models for recycling behavior, and sensitivity analyses of the models were carried out to estimate the increase in citizen participation rate achievable through the implementation of various political measures. It was found that the effect of "thorough perception of information" was the largest, followed by "minimization of evaluation of trouble" and "thorough perception of efficacy of measures." The effect of the improvement in the citizen participation rate on the reduction in environmental load was also evaluated quantitatively by life cycle inventory analyses. It was indicated that "maximization of perception of information" had the greatest effect. However, the reduction effect with "paper packs" and "PET bottles" was relatively small compared with that of "bottles/cans."     

The prediction of PCDD/DF levels in wet scrubbers associated with waste incinerators

Wet scrubber is one of the most conventional types of air pollutant control devices (APCDs), which is specially designed to treat dust and acidic gases in the flue gas simultaneously. In spite of its outstanding ability to control them, however, wet scrubbers have been considered as potential contaminant sources that may increase PCDD/DF concentrations in the flue gas. In this study, we investigated the change of PCDD/DF concentrations at the inlets and outlets of seven wet scrubbers, and compared them with other published data. With a multi-regression analysis of dust concentrations and temperature at the inlets and outlets of given wet scrubbers, we developed an empirical model to understand factors dominating the change of PCDD/DF concentrations. As a result, we confirmed that the changes of PCDD/DF concentrations in wet scrubbers are closely related to their concentrations at the inlets, which would usually be determined by the type of APCDs installed upstream of the wet scrubber.     

Isolation of antifungal bacteria from Japanese fermented soybeans, natto

An inhibitory effect of a traditional Japanese fermented food, natto, was found against plant pathogens such as Rhizoctonia solani and Fusarium oxysporum, and the bacteria which showed inhibition were isolated from the natto. Among isolated bacteria, BC-1 and GAc exhibited a strong antagonistic effect in vitro against plant pathogens on an agar medium. The supernatant of bacterial culture also showed strong activity against R. solani, which meant the antimicrobial substances were produced and secreted into the medium. Both of the bacteria were estimated as Bacillus amyloliquefaciens from a partial sequence of the 16s rRNA gene. High performance liquid chromatography analysis clearly showed the production of the lipopeptide antibiotic iturin A by BC-1 and GAc.     

The cost of stratospheric climate engineering revisited

Stratospheric aerosol injection (SAI) has been receiving increasing attention as a possible option for climate engineering. Its direct cost is perceived to be low, which has implications for international governance of this emerging technology. Here, we critically synthesize previous estimates of the underlying parameters and examine the total costs of SAI. It is evident that there have been inconsistencies in some assumptions and the application of overly optimistic parameter values in previous studies, which have led to an overall underestimation of the cost of aircraft-based SAI with sulfate aerosols. The annual cost of SAI to achieve cooling of 2 W/m² could reach US$10 billion with newly designed aircraft, which contrasts with the oft-quoted estimate of “a few billion dollars.” If existing aircraft were used, the cost would be expected to increase further. An SAI operation would be a large-scale engineering undertaking, possibly requiring a fleet of approximately 1,000 aircraft, because of the required high altitude of the injection. Therefore, because of its significance, a more thorough investigation of the engineering aspects of SAI and the associated uncertainties is warranted.     

Spider silk has an ice nucleation activity

Several ice nucleating substances have been identified, which exist in vivo or can be extracted from biological materials. Spider silk, which has a strong ability for water condensation, has also been found to possess an ice nucleation activity. The freezing temperature of water droplets was higher in the presence than in the absence of spider silk. Moreover, by means of environmental scanning electron microscopy, it was observed that the activity is not due to foreign matter attached to the silk but to the silk fibroin itself.