高海拔高寒地区金属矿山采选固废安全处置现状及研究进展

针对高海拔寒区金属矿山采选固废处置成本高、有效处置率偏低、安全隐患多等问题,采用室内试验、理论分析、数值模拟及现场实践相结合的方法,开展高海拔寒区排土场散体物料物理力学性质、排土场稳定性、充填料浆输送、充填体固结性能、充填体改性增强等方面的研究,构建冻融循环条件下散体物料内部微观结构信息与宏观力学参数定量关系模型,揭示冻融循环下排土场致灾机理和低温低气压环境下胶结充填料浆固结演化特性,提出冻融循环下排土场堆置工艺和低温低气压环境下胶结充填料浆固结增强技术。相关成果对于提高我国高海拔高寒地区金属矿山采选固废的有效处置率,降低固废处置成本,保障矿山可持续发展具有重要的理论价值和实践指导意义。     

基于Shear Damage模型的剪切闸板防喷器剪切性能研究

为揭示剪切闸板在纯剪切工况条件下(无压差、无悬重)剪切钻杆时剪切力特征,以及悬重、内外压差等复杂工况条件对剪切钻杆时剪切力和油压的影响规律。本文基于Shear Damage断裂损伤模型,通过显示动力学方法开展剪切过程仿真研究。研究结果表明:在纯剪切工况条件下,剪切力随时间增加先逐渐增加再急剧下降为0;在有悬重工况条件下,剪切力和油压随悬重增加而呈减小趋势;在钻杆内压大于外压工况条件下,剪切力和油压均随压差增大而增大;在钻杆内压小于外压工况条件下,剪切力随压差增大而减小,57/8 in(壁厚14.50 mm)、5 in(壁厚12.70 mm)规格钻杆油压随压差增大呈先增加后减小趋势,51/2 in(壁厚10.54 mm)规格钻杆油压随压差变化不明显,其余钻杆油压随压差增大均呈上升趋势。研究结果可为剪切闸板防喷器油压配置、结构优化、关井工艺改进等提供关键技术支撑。     

LS系列硫磺回收催化剂工业装置使用总结

对比总结了LS系列催化剂的使用情况，结果表明，在一级转化器均装填LS-931Al2O3基催化剂的前提下，二级转化器上部装填LS－971脱氧保护型催化剂，下部装填LS－811Al2O3催化剂后，与单纯使用LS－931催化剂相比，单器转化率由64．1％提高到70．1％，有机硫水解率由96％提高到接近100％，两项合计使装置总硫转化率由95．1％提高到96．2％，若与两个转化器全部使用LS－811催化剂相比，则装置总硫转化率可由94．49％提高到96．2％使用效果更加显著。     

不同种植方式下伊乐藻生长对沉积物磷的影响

将伊乐藻以直接抛掷、直接扦插和断枝抛掷3种方式种植,测定其上覆水TP、DO、pH和沉积物中各形态磷。结果表明:(1)实验结束(120d)时,直接抛掷、直接扦插和断枝抛掷处理组的的生物量分别增加69.14、50.32、46.15g,从长期来看,直接抛掷最有利于伊乐藻生物量的增长。(2)实验结束时,直接抛掷、直接扦插和断枝抛掷处理组的沉积物中TP分别下降了8.90%、7.30%、5.40%;无机磷分别下降了11.80%、8.20%、6.60%;有机磷分别下降了7.47%、6.46%、2.65%;NaOH提取态磷分别下降了19.90%、17.20%、11.70%;HCl提取态磷分别下降了4.12%、3.47%、2.83%。直接抛掷种植伊乐藻对沉积物中各形态磷的去除效果最好。(3)上覆水TP与沉积物中各形态磷呈正相关,说明沉积物中的磷是上覆水中磷的重要来源;上覆水TP和沉积物各形态磷均与伊乐藻生物量呈负相关,说明伊乐藻可以有效去除上覆水和沉积物中的磷;DO和pH与生物量呈正相关,而与上覆水TP和沉积物各形态磷呈负相关,说明上覆水DO和pH主要受伊乐藻的影响。     

含铁黏土矿物与电子传递体强化生物还原固定地下水中Cr(Ⅵ)的过程和机理分析

为了提高微生物还原固定Cr(Ⅵ)的速率,实现地下水Cr(Ⅵ)污染物的快速有效去除,采用添加黏土矿物与电子传递体的方法,考察了含铁黏土矿物NAu-2和电子传递体AQDS单独/共存条件下对希瓦氏菌Shewanella oneidensis MR-1还原固定地下水中不同浓度Cr(Ⅵ)(0.1~2.0 mmol·L⁻¹)的影响。结果表明：单独添加NAu-2对不同浓度Cr(Ⅵ)生物还原过程均无促进作用;单独添加AQDS对不同浓度Cr(Ⅵ)(0.2~2.0 mmol·L⁻¹)生物还原过程均产生强化作用,强化系数达到1.33~3.90;同时添加NAu-2和AQDS时,不同浓度Cr(Ⅵ)(0.2~2.0 mmol·L⁻¹)生物还原时的强化作用均得到明显提升,强化系数达到2.02~10.49。此外,对比NAu-2和AQDS共存时对MR-1还原不同浓度Cr(Ⅵ)的协同促进作用,发现在低浓度Cr(Ⅵ)(0.1~0.5 mmol·L⁻¹)体系中未产生协同作用(协同系数<1.0),中、高浓度Cr(Ⅵ)(0.8~2.0 mmol·L⁻¹)体系中产生了明显的协同作用(SF>1.0),且在Cr(Ⅵ)浓度为1.2 mmol·L⁻¹时,协同效果最为明显(协同系数为2.98),说明NAu-2和AQDS对中、高浓度Cr(Ⅵ)(0.8~2.0 mmol·L⁻¹)还原过程的协同促进作用差异较大。通过对不同Cr(Ⅵ)浓度条件下NAu-2、AQDS与MR-1共存的复杂体系中Cr(Ⅵ)迁移转化过程和机理进行研究,可为实际Cr(Ⅵ)污染场地修复提供新的修复思路及参考数据。     

A nationwide survey of 20 legacy brominated flame retardants in indoor dust from China: continuing occurrence,national distribution,and implication for human exposure

Environmental Science and Pollution Research - Despite the restrictions on polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDDs), these chemicals are still ubiquitous...     

再沸器管箱封头环焊缝裂纹形成机理研究

某化工厂的一分塔再沸器在定期检验过程中,发现材质为奥氏体不锈钢的管箱封头环焊缝存在穿透性纵向裂纹缺陷。为了进一步了解裂纹形成的原因,避免类似缺陷再次产生。本文通过对案例背景介绍,在定期检验结果的基础上,通过对缺陷部位进行取样,在实验室采用理化检验方法,结合设计和使用参数,对裂纹的形成机理进行分析并得出结论。     

Who is importing forest products from Africa to China? An analysis of implications for initiatives to enhance legality and sustainability

Global forest product value chains are increasingly subject to regulatory requirements, such as legality and sustainability certification. For African forest products, a shift in the export destinations of forest products towards China, the leading timber product manufacturer, has raised concerns that social and environmental product and process standards are declining. Aggregate drivers of this shift have been documented, yet there has been little enterprise-level analysis of Chinese actors in African timber imports based in China. This paper provides an initial analysis, highlighting implications for existing and emerging regulatory initiatives. Data show that although an increasing number of Chinese private enterprises is engaged in African timber imports, import volumes remain concentrated among a small number of geographically clustered private and state-owned firms. Government-led schemes are beginning to address timber legality concerns. But given China’s growing domestic market for finished wood products, sustainability certification requirements driven by the US and EU will not be sufficient to ensure improved sourcing by Chinese firms.     

Field test of best management practice pollutant removal efficiencies in Shenzhen, China

This paper presents a study on the use of best management practices (BMPs) for controlling nonpoint pollution in the Xikeng Reservoir watershed located in Shenzhen, China. A BMP treatment train design, including a pond, a wetland, and a buffer strip placed in series was implemented at the reservoir location. A separate grass swale was also constructed at the site. Low impact development (LID) BMPs, namely a planter box and bioboxes, were used at the parking lot of the reservoir’s Administration Building. Samples were collected during storm events and were analyzed for total suspended solids (TSS), biochemical oxygen demand (BOD₅), ammonia nitrogen (NH₃—N), and total phosphorus (TP). The removal efficiencies of both BMP systems were evaluated using the Efficiency Ratio (ER) method based on the event mean concentration (EMC) data. In summary, the pond/wetland treatment train removed 70%―90% of TSS, 20%―50% of BOD₅, and 30%―70% of TP and NH₃—N. The swale removed 50%―90% of TSS, 30%―55% of BOD₅, −10%―35% of NH₃—N, and 25%―70% of TP. For the planter box and biobox, the ranges of removal rates were 70%―90%, 20%―50%, and 30%―70% for TSS, BOD₅, and ammonia and phosphorus, respectively.