Adsorption characteristics of Cu2+ and Zn2+ from aqueous solution using carbonized food waste

The aim of the present study was to analytically provide adsorption characteristics of Cu²⁺ and Zn²⁺ using carbonized food waste (CFW); more specifically, batch tests were conducted using various concentrations of metal ions, contact times, and initial pH levels in an attempt to understand the adsorption removal of heavy metal ions in aqueous solution at concentrations ranging between 50 and 800 mg/l. The results confirmed that the adsorption equilibrium was established within a maximum of 80 min, and the maximum concentrations for adsorption of Cu²⁺ and Zn²⁺ were 28.3 and 23.5 mg/g, respectively. These adsorption levels indicate that CFW has better performance than many other adsorbents. In experiments using different pH conditions, the applicability to acid wastewater was found to be high, and an excellent adsorption removal ratio of 75%–90% was observed under acid conditions at pH 2–4. Furthermore, as the adsorption time increased, the calcium component in the CFW began to leach into the aqueous solution and raise the pH, accordingly causing the removal of heavy metal ions partially as a result of precipitation. When our results were analyzed using the Langmuir model and the Freundlich model for isothermal adsorptivity, the activity of CFW in this study was shown to be more consistent with the former; the adsorption speed of Cu²⁺ and Zn²⁺ according to a pseudosecond-order reaction model was found to be very fast for an initial concentration of not more than 100 mg/l. In a test in which an attempt was made to compare adsorption capacity values obtained from the experiments in this study with the aforementioned three models, the pseudosecond-order reaction model was found to provide results closest to the actual values.     

Rheological and Thermal Properties of the PLA Modified by Electron Beam Irradiation in the Presence of Functional Monomer

Polylactic acid (PLA) has been modified by electron beam radiation in the presence of glycidyl methacrylate (GMA) to enhance the melt strength of PLA. The modified PLA was prepared by varying both the amount of GMA and the irradiation dose and was characterized by observing the thermal properties, the melt viscoelastic properties and the gel fraction. For comparison, virgin PLA was also irradiated. All irradiated virgin PLA had a lower complex viscosity and a storage modulus compared to virgin PLA due to irradiation-induced chain scission. However, these properties were remarkably improved due to formation of long chain branching and retarding chain scission if GMA was introduced in this system. The increase in melt viscoelastic property was much dependent on the irradiation dose. At optimum doses of radiation, it showed maximum complex viscosity and storage modulus. The PLA irradiated with 20 kGy in the presence of 3 phr GMA showed a complex viscosity of about 10 times higher and a storage modulus of 100 times higher than those of virgin PLA at 0.1 rad/s. Gel fraction measurement revealed that chain scission and branching was more dominant than crosslinking. The biodegradability of irradiated PLA was slightly decreased by the presence of GMA.     

低含油污泥固化处理技术研究*

针对辽河油田欢采水厂低含油污泥,采用固化处理方法,测定了固化剂用量对抗压强度的影响和促凝剂用量对固化时间的影响,得到含油污泥:固化剂:促凝剂最佳配比为100:12:1.5。对含油污泥固化块进行浸出液毒性监测,分析结果表明:含油污泥固化块浸出液中重金属Cu、Pb、Cr、As、Zn、Ni、Cd的含量明显降低,远低于GB5085.3-2007《危险废物鉴别标准浸出毒性鉴别》;浸出液中COD降低了77%。     

Effects of 4-methylbenzylidene camphor (4-MBC) on neuronal and muscular development in zebrafish (<Emphasis Type="Italic">Danio rerio</Emphasis>) embryos

The negative effects of overexposure to ultraviolet (UV) radiation in humans, including sunburn and light-induced cellular injury, are of increasing public concern. 4-Methylbenzylidene camphor (4-MBC), an organic chemical UV filter, is an active ingredient in sunscreen products. To date, little information is available about its neurotoxicity during early vertebrate development. Zebrafish embryos were exposed to various concentrations of 4-MBC in embryo medium for 3 days. In this study, a high concentration of 4-MBC, which is not being expected at the current environmental concentrations in the environment, was used for the purpose of phenotypic screening. Embryos exposed to 15 μM of 4-MBC displayed abnormal axial curvature and exhibited impaired motility. Exposure effects were found to be greatest during the segmentation period, when somite formation and innervation occur. Immunostaining of the muscle and axon markers F59, znp1, and zn5 revealed that 4-MBC exposure leads to a disorganized pattern of slow muscle fibers and axon pathfinding errors during the innervation of both primary and secondary motor neurons. Our results also showed reduction in AChE activity upon 4-MBC exposure both in vivo in the embryos (15 μM) and in vitro in mammalian Neuro-2A cells (0.1 μM), providing a possible mechanism for 4-MBC-induced muscular and neuronal defects. Taken together, our results have shown that 4-MBC is a teratogen and influences muscular and neuronal development, which may result in developmental defects.     

Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea

In recent decades, heavy metal contamination in soil adjacent to chromated copper arsenate (CCA) treated wood has received increasing attention. This study was conducted to determine the pollution level (PL) based on the concentrations of Cr, Cu and As in soils and to evaluate the remediative capacity of native plant species grown in the CCA contaminated site, Gangwon Province, Korea. The pollution index (PI), integrated pollution index (IPI), bioaccumulation factors (BAF_shoots and BAF_roots) and translocation factor (TF) were determined to ensure soil contamination and phytoremediation availability. The 19 soil samples from 10 locations possibly contaminated with Cr, Cu and As were collected. The concentrations of Cr, Cu and As in the soil samples ranged from 50.56-94.13 mg kg⁻¹, 27.78-120.83 mg kg⁻¹, and 0.13-9.43 mg kg⁻¹, respectively. Generally, the metal concentrations decreased as the distance between the CCA-treated wood structure and sampling point increased. For investigating phytoremediative capacity, the 19 native plant species were also collected in the same area with soil samples. Our results showed that only one plant species of Iris ensata, which presented the highest accumulations of Cr (1120 mg kg⁻¹) in its shoot, was identified as a hyperaccumulator. Moreover, the relatively higher values of BAF_shoot (3.23-22.10) were observed for Typha orientalis, Iris ensata and Scirpus radicans Schk, suggesting that these plant species might be applicable for selective metal extraction from the soils. For phytostabilization, the 15 plant species with BAF_root values > 1 and TF values < 1 were suitable; however, Typha orientalis was the best for Cr.     

Mechanistic and kinetic study on the ozonolysis of n-butyl vinyl ether, i-butyl vinyl ether and t-butyl vinyl ether

Density functional theory (DFT) and ab initio method are employed to elucidate the mechanisms for O(3)-initiated oxidation of n-butyl vinyl ether (n-BVE) and its isomers (i-BVE and t-BVE). For each BVE, the reactions proceed via O(3) cycloaddition resulting in the formation of primary ozonides (POZs) and then two self-decomposition pathways of POZs are followed. Major products are identified to be formaldehyde and butyl formates (CH(3)CH(2)CH(2)CH(2)OCHO for n-BVE, (CH(3))(2)CHCH(2)OCHO for i-BVE and (CH(3))(3)COCHO for t-BVE). The total and individual rate constants for main product channels have been calculated using the modified multichannel Rice-Ramsperger-Kassel-Marcus (RRKM) approach. At 298 K and 101 kPa, the calculated total rate constants are 2.50×10(-16), 3.41×10(-16) and 4.17×10(-16) cm(3) molecule(-1) s(-1) for n-BVE+O(3), i-BVE+O(3) and t-BVE+O(3), respectively, which are in perfect agreement with experimental results. The total rate coefficients are almost pressure independent in the range of 0.001-101 kPa but obviously positive temperature dependent over the whole study temperature range (200-400 K). Also, the favorable reaction pathways have been determined through the estimation of branching ratios. Moreover, the influence of alkoxy group structure on the reactivity of vinyl ethers was examined.     

序批式生物膜反应器处理农村生活污水的填料对比研究

选用4种填料进行序批式生物膜反应器(SBBR)处理农村生活污水的研究,通过出水COD、NH4+-N等指标的测定以及生物膜的扫描电镜观察,考察了运用不同填料时SBBR的污染物去除情况和生物膜的长势,以期筛选出适用于农村生活污水处理的填料。结果表明,3#、4#SBBR(分别选用组合填料和碳素纤维填料)的DO、pH波动幅度均相对较小,比1#、2#SBBR(分别选用立体网状填料及海绵填料)更加稳定;4#SBBR的COD去除效果最好,水力停留时间仅需5h,3#SBBR的COD去除效果其次,所需水力停留时间为6h,而1#、2#SBBR在运行8h时也无法将COD完全消化;3#、4#SBBR出水的NH4+-N、TN去除效果均高于1#、2#SBBR;采用4种填料的SBBR的生物膜长势优劣情况为碳素纤维填料>组合填料>海绵填料>立体网状填料;碳素纤维填料及组合填料在受到进水负荷冲击后,能相对较快适应环境,且填料上的微生物活性较高,较适合运用于中国农村生活污水的处理。     

零价铁修复受三氯乙烯污染地下水的实验研究

通过批实验和柱实验研究了三氯乙烯（TCE）初始浓度、四氯乙烯(PCE)等对零价铁去除三氯乙烯的影响,并建立了三氯乙烯降解的反应动力学方程。结果表明：（1）零价铁对TCE具有较好的降解效果,反应符合准一级反应动力学方程,表观反应速率常数随TCE浓度的增加而减小;（2）在铁粉充足的条件下,TCE初始浓度对降解效果影响不显著,且TCE去除率皆可达到90%以上;（3）PCE的存在抑制了TCE的脱氯反应。PCE和TCE共存时,TCE的最大去除率仅为64.2%;TCE脱氯反应的表观反应速率明显降低,反应半衰期由TCE单独存在时的6.8～9.7 h增大到66 h～346.5 h。     

神经网络模型在北海市空气日报污染指数计算中的应用

根据空气质量日报的实际需要,引入了Excel软件神经网络技术建立空气质量日报污染指数计算模型,采用LM算法提高了计算精度,并将模型应用于北海市空气日报。结果表明:此法较之实际公式计算法更加快捷方便,并且计算结果相当吻合。     

应用反渗透技术处理垃圾填埋场渗滤液

垃圾填埋场渗滤液属于高浓度氨氮废水,其水量、水质特性变化大,成分复杂,因此较难处理。反渗透分离技术能有效截留垃圾渗滤液中溶解态的有机和无机污染物。采用三级反渗透处理垃圾渗滤液工艺处理后的出水水质,能够满足《生活垃圾填埋污染控制标准》（DB16889-2008）要求,并把渗滤液浓缩液回灌于填埋场。