Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Effects of impervious cover on the surface water quality and aquatic ecosystem of the Kyeongan stream in South Korea

The extent of impervious cover in a watershed has been linked to the quality of an urban aquatic environment. The Kyeongan watershed in South Korea was investigated to evaluate the relationship between the total impervious area (TIA) and the aquatic ecosystem of the watershed, including water quality and aquatic life using a relatively high-resolution (0.4 m) image. The TIA was found to be approximately 12% of the watershed, which indicates that the quality of its environment was being adversely affected by it. For water quality, Pearson correlation analyses showed that all water quality parameters studied were found to be positively correlated with TIA at p < 0.01, except for nitrate (NO3-). In addition, the zone with a higher TIA was found to have worse water quality. Some water quality parameters, such as nitrite (NO2-), total phosphorus, and phosphate (PO4(3-)) were highly affected by discharges from wastewater treatment plants. Water quality data suggest that TIA could be used to predict the water quality of streams. For ecological parameters, the diatom index for organic pollution and trophic diatom index were found to be highly correlated with TIA, whereas physical habitat and benthic macroinvertebrates were poorly correlated with TIA. However, the results indicate that the extent of impervious cover can be a useful indicator for predicting the status of specific ecosystem of streams.     

Wood pellet fly ash and bottom ash as an effective liming agent and nutrient source for rye grass (Lolium perenne L.) and oats (Avena sativa)

Fly ash (FA) and bottom ash (BA) from a softwood pellet boiler were characterized and evaluated as soil amendments. In a greenhouse study, two plant species (rye grass, Lolium perenne L. and oats, Avena sativa) were grown in three different treatments (1% FA, 1% BA, non-amended control) of a silty loam soil. Total concentrations of plant nutrients Ca, K, Mg, P and Zn in both ashes were elevated compared to conventional wood ash. Concentrations of Cd, Cr, Pb, Se and Zn were found to be elevated in the FA relative to BA and the non-amended soil. At 28 d, oat above-ground biomass was found to be significantly greater in soil amended with FA. Potassium and Mo plant tissue concentrations were significantly increased by addition of either ash, and FA significantly increased Zn tissue concentrations. Cadmium and Hg tissue concentrations were elevated in some cases. As soil amendments, either pellet ash is an effective liming agent and nutrient source, but high concentrations of Cd and Zn in FA may preclude its use as an agricultural soil amendment in some jurisdictions. Lower ash application rates than those used in this study (i.e. <1%) may still provide sufficient nutrients and effective neutralization of soil acidity.     

Sources and distribution of polychlorinated-dibenzo-p-dioxins and -dibenzofurans in soil and sediment from the Yellow Sea region of China and Korea

Polychlorinated-dibenzo-p-dioxins and -dibenzofurans (PCDD/Fs) were measured in soils and sediments from the Yellow Sea region. Korean soils and sediments mostly contained detectable PCDD/Fs and showed a widespread distribution among locations. Soil and sedimentary PCDD/Fs from China were comparable to or less than those in Korea. The patterns of relative concentrations of individual congeners in soils were different between the two countries, but similar in sediments. Sources of PCDD/Fs in China and Korea were found to be independent of each other and their distributions reflected matrix-dependent accumulation. Spatial distribution indicated some point sources in Korea while Chinese sources were more widespread and diffuse. PCDD/Fs measured in the coastal areas of the Yellow Sea were comparable to or less than those previously reported in for eastern Asia. However, ∑TEQs in soils and sediments were near to or, in some cases exceeded environmental quality guidelines.     

Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate

Construction and demolition waste has been dramatically increased in the last decade, and social and environmental concerns on the recycling have consequently been increased. Recent technology has greatly improved the recycling process for waste concrete. This study investigates the fundamental characteristics of concrete using recycled concrete aggregate (RCA) for its application to structural concrete members. The specimens used 100% coarse RCA, various replacement levels of natural aggregate with fine RCA, and several levels of fly ash addition. Compressive strength of mortar and concrete which used RCA gradually decreased as the amount of the recycled materials increased. Regardless of curing conditions and fly ash addition, the 28 days strength of the recycled aggregate concrete was greater than the design strength, 40 MPa, with a complete replacement of coarse aggregate and a replacement level of natural fine aggregate by fine RCA up to 60%. The recycled aggregate concrete achieved sufficient resistance to the chloride ion penetration. The measured carbonation depth did not indicate a clear relationship to the fine RCA replacement ratio but the recycled aggregate concrete could also attain adequate carbonation resistance. Based on the results from the experimental investigations, it is believed that the recycled aggregate concrete can be successfully applied to structural concrete members.     

Comparison of Fe(VI) (FeO4(2-)) and ozone in inactivating Bacillus subtilis spores

The protozoan parasites such as Cryptosporidiumparvum and Giardialamblia have been recognized as a frequent cause of recent waterborne disease outbreaks because of their strong resistance against chlorine disinfection. In this study, ozone and Fe(VI) (i.e., FeO(4)(2-)) were compared in terms of inactivation efficiency for Bacillus subtilis spores which are commonly utilized as an indicator of protozoan pathogens. Both oxidants highly depended on water pH and temperature in the spore inactivation. Since redox potential of Fe(VI) is almost the same as that of ozone, spore inactivation efficiency of Fe(VI) was expected to be similar with that of ozone. However, it was found that ozone was definitely superior over Fe(VI): at pH 7 and 20°C, ozone with the product of concentration×contact time (CˉT) of 10mgL(-1)min inactivate the spores more than 99.9% within 10min, while Fe(VI) with CˉT of 30mgL(-1) min could inactivate 90% spores. The large difference between ozone and Fe(VI) in spore inactivation was attributed mainly to Fe(III) produced from Fe(VI) decomposition at the spore coat layer which might coagulate spores and make it difficult for free Fe(VI) to attack live spores.     

Reduction of tar using cheap catalysts during sewage sludge gasification

Solid-fuel conversion or gasification study of sewage sludge and energy recovery has become increasingly important because energy recovery and climate change are emerging issues. Various types of catalysts, such as dolomite, steel slag and calcium oxide, were tested for tar reduction during the sewage sludge gasification process. For the experiments on sewage sludge gasification reactions and tar reduction using the catalysts, a fixed bed of laboratory-scale experimental apparatus was set up. The reactor was made of quartz glass using an electric muffle furnace. The sewage sludge samples used had moisture contents less than 6%. The experimental conditions were as follows: sample weight was 20 g and reaction time was 10 min, gasification reaction temperature was from 600 to 800°C, and the equivalence ratio was 0.2. The quantity of catalysts was 2–6 g, and temperatures of catalyst layers were 500–700°C. As the reaction temperature increased up to 800°C, the yields of gaseous products and liquid products increased, whereas char and tar products decreased, showing effects on gas product compositions. These results were considered to be due to the increase of the water-gas reaction and Boudouard reaction. In the case of experiments with catalysts, dolomite (4 g), steel slag (6 g) and calcium oxide (6 g) were used. When the temperature of catalysts increased, the weight of the tar produced decreased with different cracking performances by different catalysts. Reforming reactions were considered to occur on the surface of dolomite, steel slag and calcium oxide, causing cracking of the hydrocarbon structure, which eventually showed reduced tar generation.     

Drying characteristics of sewage sludge using vacuum evaporation and frying

This study was performed to investigate the possibility of utilizing sewage sludge as a fuel. The drying characteristics of sewage sludge were examined by using vacuum evaporation and fry-drying technology in a batch-type rotary evaporator. In addition, the optimal drying conditions of sludge in the vacuum evaporator were investigated in terms of the vacuum pressure, temperature, and oil dosage ratio, etc. Experimental results showed that the moisture content in the sludge decreased with increases in oil/sewage sludge ratio and temperature. Dried sludge fuel (SDF) product could be obtained with on average less than 5% moisture content and a lower heating value of more than 4000 kcal/kg. Considering energy efficiency, we suggest that the optimal operating condition for drying sludge is ?450 mmHg of vacuum, a temperature of 100°C, a drying time of 90 min, and a sludge/oil ratio of 1:1. The SDF product was shaped as granules and fluff-type particles. Evaluated from the perspective of the energy balance and economic considerations, this sludge drying system with vacuum fry drying could be used for effective sludge treatment and the production of SDF.     

No bioavailability of 17α-ethinylestradiol when associated with nC60 aggregates during dietary exposure in adult male zebrafish (Danio rerio)

The C(60) fullerene is a manufactured carbon nanoparticle (CNP) that could pose a risk to humans and other organisms after release into the environment. In surface waters, C(60) is likely to be present as aggregates of nC(60) and these aggregates can associate with other substances that are toxic. Our goal was to evaluate the association of a model contaminant [17α-ethinylestradiol (EE2)] with nC(60) and determine bioavailability of EE2 after accumulation by a filter feeding organism [Brine shrimp (BS) Artemia sp.] and subsequent dietary exposure in zebrafish. Aqueous suspensions of nC(60) were prepared (600 mg C(60)/900 mL, 6-month water stirred method) with/without EE2 (1 μg/L) and BS were exposed to these preparations. Accumulation of nC(60) in gut of BS was assessed by light microscopy, and C(60) were extracted from BS and concentration analyzed by HPLC. Adult male zebrafish were fed (5d) live BS according to the following treatments: BS (control); BS containing nC(60); BS containing nC(60)+EE2; or BS containing EE2. Liver was excised from exposed fish and total RNA was extracted for assessment of vitellogenin gene (vtg1A/B) expression. The vtg1A/B was highly up-regulated in fish exposed to BS containing EE2, but expression of vtg1A/B did not differ from controls in other treatments. The EE2 associated with nC(60) did not become bioavailable in zebrafish during passage through the intestinal tract of zebrafish. Results have implications on the effect of nC(60) on the bioavailability of co-contaminants in organisms during dietary exposure.