Ultraviolet absorbance as a proxy for total dissolved mercury in streams

Stream water samples were collected over a range of hydrologic and seasonal conditions at three forested watersheds in the northeastern USA. Samples were analyzed for dissolved total mercury (THg_d), DOC concentration and DOC composition, and UV₂₅₄ absorbance across the three sites over different seasons and flow conditions. Pooling data from all sites, we found a strong positive correlation of THg_d to DOC (r² = 0.87), but progressively stronger correlations of THg_d with the hydrophobic acid fraction (HPOA) of DOC (r² = 0.91) and with UV₂₅₄ absorbance (r² = 0.92). The strength of the UV₂₅₄ absorbance-THg_d relationship suggests that optical properties associated with dissolved organic matter may be excellent proxies for THg_d concentration in these streams. Ease of sample collection and analysis, the potential application of in-situ optical sensors, and the possibility for intensive monitoring over the hydrograph make this an effective, inexpensive approach to estimate THg_d flux in drainage waters.     

Organic aerosol characterization by complementary measurements of chemical bonds and molecular fragments

Organic aerosol chemical markers from normalized concentrations of independent measurements of mass fragments (using Aerosol Mass Spectrometry, AMS) are compared to bond-based functional groups (from Fourier Transform Infrared spectroscopy, FTIR) during eight field projects in the western hemisphere. Several field projects show weak correlations between alcohol group fractions and m/z 60 fractions, consistent with the organic hydroxyl groups and the fragmentation of saccharides, but the weakness of the correlations indicate chemical differences among the relationships for ambient aerosols in different regions. Carboxylic acid group fractions and m/z 44 fractions are correlated weakly for three projects, with correlations expected for aerosols dominated by di-acid compounds since their fragmentation is typically dominated by m/z 44. Despite differences for three projects with ratios of m/z 44 to m/z 57 fragments less than 10, five projects showed a linear trend between the project-average m/z 44 to m/z 57 ratio and the ratio of acid and alkane functional groups. While this correlation explains only a fraction of the fragment and bond variability measured, the consistency of this relationship at multiple sites indicates a general agreement with the interpretation of the relative amount of m/z 44 as a carboxylic acid group marker and m/z 57 as an alkane group marker.     

Population dynamics and the economics of invasive species management: the greenhouse whitefly in California-grown strawberries

In agriculture, relatively few efficacious control measures may be available for an invasive pest. In the case of a new insect pest, insecticide use decisions are affected by regulations associated with its registration, insect population dynamics, and seasonal market price cycles. We assess the costs and benefits of environmental regulations designed to regulate insecticide applications on an invasive species. We construct a bioeconomic model, based on detailed scientific data, of management decisions for a specific invasion: greenhouse whiteflies in California-grown strawberries. The empirical model integrates whitefly population dynamics, the effect of whitefly feeding on strawberry yields, and weekly strawberry price. We use the model to assess the optimality of alternative treatment programs on a simulated greenhouse whitefly population. Our results show that regulations may lead growers to "under-spray" when placed in an economic context, and provide some general lessons about the design of optimal invasive species control policies.     

Challenges to liberalism: The case of Australian energy policy

This paper considers liberal and nationalist economic policy approaches to the ownership and development of Australian energy resources (oil, gas, coal and uranium). In the two decades prior to 1983, Australia pursued economic policies in relation to its energy resources which could broadly be described as ‘nationalist’. Governments of the day intervened in development decisions in an effort to enhance the ‘national interest’. From 1983, along with the deregulation of the Australian economy as a whole, policy relating to energy resources was liberalised. Development of energy reserves henceforth occurred according to the dictates of the market. This paper argues that recent Australian energy policy initiatives reflect an increase in nationalist influences and a retreat from the liberalisation agenda that dominated energy policy making in the 1980s and 1990s. Three examples are discussed where policy has been influenced by a nationalist framework: (1) the domestic gas reservation policy in Western Australia; (2) Australian government efforts to promote a ‘value adding’ nuclear processing industry and (3) Australian Labor Party policy giving preferential financial incentives for gas to liquids projects. The re-emergence of nationalism in Australia is occurring either because policy makers now favour it as a path to energy security or in some cases because they believe that appeals to nationalism will generate political support.     

Batch sorption dynamics and equilibrium for the removal of lead ions from aqueous phase using activated carbon developed from coffee residue activated with zinc chloride

Lignocellulosic materials are good precursors for the production of activated carbon. In this work, coffee residue has been used as raw material in the preparation of powder activated carbon by the method of chemical activation with zinc chloride for the sorption of Pb(II) from dilute aqueous solutions.The influence of impregnation ratio (ZnCl₂/coffee residue) on the physical and chemical properties of the prepared carbons was studied in order to optimize this parameter. The optimum experimental condition for preparing predominantly microporous activated carbons with high pore surface area (890 m²/g) and micropore volume (0.772 cm³/g) is an impregnation ratio of 100%. The developed activated carbon shows substantial capability to sorb lead(II) ions from aqueous solutions and for relative impregnation ratios of 75 and 100%, the maximum uptake is practically the same. Thus, 75% represents the optimal impregnation ratio.Batch experiments were conducted to study the effects of the main parameters such as contact time, initial concentration of Pb(II), solution pH, ionic strength and temperature. The maximum uptake of lead(II) at 25 °C was about 63 mg/g of adsorbent at pH 5.8, initial Pb(II) concentration of 10 mg/L, agitation speed of 200 rpm and ionic strength of 0.005 M. The kinetic data were fitted to the models of pseudo-first order and pseudo-second order, and follow closely the pseudo-second order model. Equilibrium sorption isotherms of Pb(II) were analyzed by the Langmuir, Freundlich and Temkin isotherm models. The Freundlich model gives a better fit than the others.Results from this study suggest that activated carbon produced from coffee residue is an effective adsorbent for the removal of lead from aqueous solutions and that ZnCl₂ is a suitable activating agent for the preparation of high-porosity carbons.     

Application of lime and calcium hypochlorite in the dephenolisation and discolouration of olive mill wastewater

The application of hypochlorite for the removal of soluble COD, phenolic and polyphenolic like compounds, and other organic compounds responsible for the olive mill wastewater (OOWW) colour has been experimentally studied. After the OOWW filtration on a sand column, the effluent was subjected to a fast liming under optimal conditions. Lime application reduced polyphenols, COD and SS contents to half of their initial values but an important blackening of the treated OOWW was observed, especially when adding high concentrations of lime (10% (W/V) and 15% (W/V)).A second stage of treatment was applied using calcium hypochlorite. In this stage, removal of the studied compounds reached as much as 95% at higher concentrations, and particularly the colouring of OOWW which is generally difficult to eliminate was greatly reduced. The OOWW hypochloration acted through coagulation–flocculation and a rapid oxidation of the organic matter proceeded from the first 5 min. The kinetic study of the degradation of the waste polluting compounds from liming showed that Ca(ClO)₂ reacts similarly in the elimination of organic compounds, polyphenols, SS and colouration. The analysis of the organochloride compounds generated by the reaction between hypochlorite and the organic compounds showed that DDD, DDT and the heptachlor contents exceeded the values recommended by the International and European drinking water standards.     

Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

From land cover change to land function dynamics: a major challenge to improve land characterization

Land cover change has always had a central role in land change science. This central role is largely the result of the possibilities to map and characterize land cover based on observations and remote sensing. This paper argues that more attention should be given to land use and land functions and linkages between these. Consideration of land functions that provide a wide range of goods and services makes more integrated assessments of land change possible. The increasing attention to multifunctional land use is another incentive to develop methods to assess changes in land functions. A number of methods to quantify and map the spatial extent of land use and land functions are discussed and the implications for modeling are identified based on recent model approaches in land change science. The mixed use of land cover, land use and land function in maps and models leads to inconsistencies in land change assessments. Explicit attention to the non-linear relations between land cover, land use and land function is essential to consistently address land change. New methods to map and quantify land function dynamics will enhance our ability to understand and model land system change and adequately inform policies and planning.     

Modeling the costs and benefits of dam construction from a multidisciplinary perspective

Although the benefits of dam construction are numerous, particularly in the context of climate change and growing global demand for electricity, recent experience has shown that many dams have serious negative environmental, human, and political consequences. Despite an extensive literature documenting the benefits and costs of dams from a single disciplinary perspective, few studies have simultaneously evaluated the distribution of biophysical, socio-economic, and geopolitical implications of dams. To meet the simultaneous demands for water, energy, and environmental protection well into the future, a broader view of dams is needed. We thus propose a new tool for evaluating the relative costs and benefits of dam construction based on multi-objective planning techniques. The Integrative Dam Assessment Modeling (IDAM) tool is designed to integrate biophysical, socio-economic, and geopolitical perspectives into a single cost/benefit analysis of dam construction. Each of 27 different impacts of dam construction is evaluated both objectively (e.g., flood protection, as measured by RYI years) and subjectively (i.e., the valuation of said flood protection) by a team of decision-makers. By providing a visual representation of the various costs and benefits associated with two or more dams, the IDAM tool allows decision-makers to evaluate alternatives and to articulate priorities associated with a dam project, making the decision process about dams more informed and more transparent. For all of these reasons, we believe that the IDAM tool represents an important evolutionary step in dam evaluation.     

A Multilevel Model of the Impact of Farm‐Level Best Management Practices on Phosphorus Runoff1

Abstract: Multilevel or hierarchical models have been applied for a number of years in the social sciences but only relatively recently in the environmental sciences. These models can be developed in either a frequentist or Bayesian context and have similarities to other methods such as empirical Bayes analysis and random coefficients regression. In essence, multilevel models take advantage of the hierarchical structure that exists in many multivariate datasets; for example, water quality measurements may be taken from individual lakes, lakes are located in various climatic zones, lakes may be natural or man‐made, and so on. The groups, or levels, may effectively yield different responses or behaviors (e.g., nutrient load response in lakes) that often make retaining group membership more effective when developing a predictive model than when working with either all of the data together or working separately with the individuals. Here, we develop a multilevel model of the impact of farm level best management practices (BMPs) on phosphorus runoff. The result of this research is a model with parameters which vary with key practice categories and thus may be used to evaluate the effectiveness of these practices on phosphorus runoff. For example, it was found that the effect of fertilizer application rate on farm‐scale phosphorus loss is a function of the application method, the hydrologic soil group, and the land use (crop type). Further, results indicate that the most effective method for controlling fertilizer loss is through soil injection. In summary, the resultant multilevel model can be used to estimate phosphorus loss from farms and hence serve as a useful tool for BMP selection.