Heading for the hills: climate-driven community relocations in the Solomon Islands and Alaska provide insight for a 1.5 °C future

Whilst future air temperature thresholds have become the centrepiece of international climate negotiations, even the most ambitious target of 1.5 °C will result in significant sea-level rise and associated impacts on human populations globally. Of additional concern in Arctic regions is declining sea ice and warming permafrost which can increasingly expose coastal areas to erosion particularly through exposure to wave action due to storm activity. Regional variability over the past two decades provides insight into the coastal and human responses to anticipated future rates of sea-level rise under 1.5 °C scenarios. Exceeding 1.5 °C will generate sea-level rise scenarios beyond that currently experienced and substantially increase the proportion of the global population impacted. Despite these dire challenges, there has been limited analysis of how, where and why communities will relocate inland in response. Here, we present case studies of local responses to coastal erosion driven by sea-level rise and warming in remote indigenous communities of the Solomon Islands and Alaska, USA, respectively. In both the Solomon Islands and the USA, there is no national government agency that has the organisational and technical capacity and resources to facilitate a community-wide relocation. In the Solomon Islands, communities have been able to draw on flexible land tenure regimes to rapidly adapt to coastal erosion through relocations. These relocations have led to ad hoc fragmentation of communities into smaller hamlets. Government-supported relocation initiatives in both countries have been less successful in the short term due to limitations of land tenure, lacking relocation governance framework, financial support and complex planning processes. These experiences from the Solomon Islands and USA demonstrate the urgent need to create a relocation governance framework that protects people’s human rights.     

Dynamic Modeling of Biological Treatment of Leachates from Solid Wastes

Leachates from municipal solid wastes are liquids formed by organic and inorganic components suitable for biological treatment. In biological treatment plants, prediction of the output parameter value due to dynamic variation is essential. A dynamic model based on ASM1 has been applied for prediction of effluent COD value at real scale, using three different composition leachates. Tuning between dynamic variables and predicted parameter is tested for a correct proposal of the model. Dynamic model predicts correctly fluctuations in the output COD value and tempers dynamism caused by variation of temperature and biomass concentration in the case of high organic loaded leachates. Kinetic parameters Y _H and K _s are fixed to solve the model, and dynamic variables μ _H and X_BH are changing in time. μ_H,max is obtained in simulation (0.37–1.82 day^?1) for minimum error between predicted values and experimental data. μ_H,max value is much lower compared with the value for domestic wastewater treatment due to lower biodegradability of leachate.     

A Proposed Methodology to Assess the Quality of Public Use Management in Protected Areas

In recent years, the goal of nature preservation has faced, almost worldwide, an increase in the number of visitors who are interested in experiencing protected areas resources, landscapes and stories. Spain is a good example of this process. The rapidly increasing numbers of visitors have prompted administrations and managers to offer and develop a broad network of facilities and programs in order to provide these visitors with information, knowledge and recreation. But, are we doing it the best way? This research focuses on developing and applying a new instrument for evaluating the quality of visitor management in parks. Different areas are analyzed with this instrument (78 semi-quantitative indicators): planning and management capacity (planning, funding, human resources), monitoring, reception, information, interpretation, environmental education, training, participation and volunteer's programs. Thus, we attempt to gain a general impression of the development of the existing management model, detecting strengths and weaknesses. Although Spain's National Parks constituted the specific context within which to develop the evaluation instrument, the design thereof is intended to provide a valid, robust and flexible method for application to any system, network or set of protected areas in other countries. This paper presents the instrument developed, some results obtained following its application to Spanish National parks, along with a discussion on the limits and validity thereof.     

Environmental pesticide distribution in horticultural and floricultural periurban production units

The environmental pesticide distribution on non-target systems (soil, drift and agricultural plastics) during the application step at small periurban production units, was studied in open field and greenhouses, for different crops (tomato, lettuce, broccoli, strawberry and flowers) using different pesticides (endosulfan, procymidone, chlorothalonil, chlorpyrifos and deltamethrin). In all cases, soil was the most exposed non-target system. For greenhouses, a general pesticide distribution was found of approximately 2/3 for crop, 1/4 for soil and 1/20 for plastic, of the total amount applied. In horticultural open fields, although the distribution was very dependent on the crop size and type, soil was also the most exposed non-target subsystem. Pesticide drift seems not to be significant in these production units, whilst pesticide accumulation on agricultural plastics reached up to 45% of the total applied, for polyethylene mulching in strawberry fields.     

Assessment of the levels of DDT and DDE in soil and blood samples from Tabasco, Mexico

In Mexico, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) was used until the year 2000, principally in agriculture and anti-paludal program health campaigns. The southeastern region of Mexico was an important area of malaria, and from 1957 DDT was applied indoors every 6?months, with a coverage of 2?g/m². The current study was performed in Tabasco, a Mexican state located in the southeastern region of Mexico. DDT and 1,1-dichloro-2,2-bis(4-chlorophenyl)ethene (DDE) were analyzed by gas chromatography/mass spectrometry. In general, low levels were found in household outdoor samples; the levels of DDT ranged from not detectable to 0.048?mg/kg, and of DDE from 0.001 to 0.068?mg/kg. An important finding was that, in all communities where DDT in blood was analyzed, exposure to DDT was found, indicating both past and present exposure. Although the levels found in this study were lower than other studies in Mexico, there is a need to evaluate whether the people living in the study area are at risk.     

Inactivation of <Emphasis Type="Italic">Escherichia coli</Emphasis> in fresh water with advanced oxidation processes based on the combination of O<Subscript>3</Subscript>, H<Subscript>2</Subscript>O<Subscript>2</Subscript>, and TiO<Subscript>2</Subscript>. Kinetic modeling

The purpose of this work was to study the efficiency of different treatments, based on the combination of O₃, H₂O₂, and TiO₂, on fresh surface water samples fortified with wild strains of Escherichia coli. Moreover, an exhaustive assessment of the influence of the different agents involved in the treatment has been carried out by kinetic modeling of E. coli inactivation results. The treatments studied were (i) ozonation (O₃), (ii) the peroxone system (O₃/0.04 mM H₂O₂), (iii) catalytic ozonation (O₃/1 g/L TiO₂), and (iv) a combined treatment of O₃/1 g/L TiO₂/0.04 mM H₂O₂. It was observed that the peroxone system achieved the highest levels of inactivation of E. coli, around 6.80 log after 10 min of contact time. Catalytic ozonation also obtained high levels of inactivation in a short period of time, reaching 6.22 log in 10 min. Both treatments, the peroxone system (O₃/H₂O₂) and catalytic ozonation (O₃/TiO₂), produced a higher inactivation rate of E. coli than ozonation (4.97 log after 10 min). While the combination of ozone with hydrogen peroxide or titanium dioxide thus produces an increase in the inactivation yield of E. coli regarding ozonation, the O₃/TiO₂/H₂O₂ combination did not enhance the inactivation results. The fitting of experimental values to the corresponding equations through non-linear regression techniques was carried out with Microsoft® Excel GInaFiT software. The inactivation results of E. coli did not respond to linear functions, and it was necessary to use mathematical models able to describe certain deviations in the bacterial inactivation processes. In this case, the inactivation results fit with mathematical models based on the hypothesis that the bacteria population is divided into two different subgroups with different degrees of resistance to treatments, for instance biphasic and biphasic with shoulder models.

Open image in new window

Graphical abstract ?

     

Development of the Diatom Ecological Quality Index (DEQI) for peri-urban mountain streams in the Basin of Mexico

Environmental Science and Pollution Research - In the Basin of Mexico, one of the most important economic regions in the country with over 22 million inhabitants, peri-urban streams have been...     

Sibling aggression, hatching asynchrony, and nestling mortality in the black kite (Milvus migrans)

In siblicidal species, hatching asynchrony could act to reduce sibling rivalry or promote the death of last-hatched chicks. The pattern of hatching asynchrony was experimentally altered in the black kite Milvus migrans. Hatching asynchrony in control broods was intermediate between those of experimentally synchronised and asynchronised broods. Sibling aggression and wounds on the chicks were more commonly observed early in the nestling period and in synchronous nests. Serious injuries were observed on last-hatched chicks in asynchronous nests, as were observations of intimidated or crushed chicks. Sibling aggression was related to food abundance, but some chicks died at an early age in nests with abundant food (cainism). Cainism was more commonly found in asynchronous nests. For species with facultative siblicide, moderate hatching asynchrony could be a compromise between reducing sibling rivalry and avoiding large size differences between sibs that would result in cainism. Female black kites preferentially fed the smallest chicks and exhibited behaviours to reduce sibling aggression, contrary to observations in other siblicidal species. In a highly opportunistic forager such as the black kite, a strategy may exist to protract the life of all the chicks in the brood, waiting for unpredictable situations of food overabundance. This would induce the appearance of a parent-offspring conflict over brood reduction, reflected in the existence of a possible anticipated response by some of the chicks (cainism) and in the appearance of special behaviours by the parents to selectively feed smaller chicks or reduce sibling aggression. In this facultatively siblicidal species, cainism does not seem to be the final stage of an evolutionary trend favouring the raising of high-quality chicks, but a manifestation of a parent-offspring conflict over brood size. Received: 9 March 1998 / Accepted after revision: 8 August 1998     

Strength and workability of masonry mortars manufactured with ladle furnace slag

Ladle furnace basic slag (LFS) is a by-product of the steelmaking process. It has rarely been recovered in the past and is usually disposed of in landfill sites. Despite containing stable chemical substances of great quality, some of which are potentially hydraulic, its practical applications have been limited. This paper discusses the attractive option of using LFS in the manufacture of masonry mortars for use in the construction industry, which requires an analysis of the principal characteristics of such mortars, i.e. workability and mechanical strength. It reports on a comparative study, using standard commercial admixtures, between conventional masonry mortars and mortars manufactured with LFS as a partial replacement for sand and cement, the results of which imply considerable economic savings in sand and cement, improvements in the properties of the mortars and in overall sustainability, by avoiding disposal and conserving natural resources.