Biogas production from anaerobic digestion of food waste and relevant air quality implications

Biopower can diversify energy supply and improve energy resiliency. Increases in biopower production from sustainable biomass can provide many economic and environmental benefits. For example, increasing biogas production through anaerobic digestion of food waste would increase the use of renewable fuels throughout California and add to its renewables portfolio. Although a biopower project will produce renewable energy, the process of producing bioenergy should harmonize with the goal of protecting public health. Meeting air emission requirements is paramount to the successful implementation of any biopower project. A case study was conducted by collecting field data from a wastewater treatment plant that employs anaerobic codigestion of fats, oils, and grease (FOG), food waste, and wastewater sludge, and also uses an internal combustion (IC) engine to generate biopower using the biogas. This research project generated scientific information on (a) quality and quantity of biogas from anaerobic codigestion of food waste and municipal wastewater sludge, (b) levels of contaminants in raw biogas that may affect beneficial uses of the biogas, (c) removal of the contaminants by the biogas conditioning systems, (d) emissions of NO_x, SO₂, CO, CO₂, and methane, and (e) types and levels of air toxics present in the exhausts of the IC engine fueled by the biogas. The information is valuable to those who consider similar operations (i.e., co-digestion of food waste with municipal wastewater sludge and power generation using the produced biogas) and to support rulemaking decisions with regards to air quality issues for such applications.

Implications: Full-scale operation of anaerobic codigestion of food waste with municipal sludge is viable, but it is still new. There is a lack of readily available scientific information on the quality of raw biogas, as well as on potential emissions from power generation using this biogas. This research developed scientific information with regard to quality and quantity of biogas from anaerobic co-digestion of food waste and municipal wastewater sludge, as well as impacts on air quality from biopower generation using this biogas. The need and performance of conditioning/pretreatment systems for biopower generation were also assessed.     

Environmental and cultural changes under Chilean neoliberalism: an ethnography of forestry and the Mapuche in Valle Elicura

Dominant development discourses often proclaim promises of economic prosperity and global inclusion, while actually disenfranchising local cultures in the Global South from their traditional environments. In Latin America, and specifically Chile, development manifests itself through neoliberal economic policies implemented in the late twentieth century, while simultaneously creating political economies ripe for foreign and corporate exploitation. Using a political ecology framework, this ethnography presents a case study of the correlation between the development of Chilean neoliberalism and the lifeways of Mapuche indigenous peoples in the town of Valle Elicura, Chile. The findings reveal that natural resource extraction and ecological devastation to local forests by large, international logging companies result in environmental, cultural, and environmental-cultural transformations for this community. The local people who more closely rely on their surrounding environments to regulate and inform their transportation networks, basic life needs, and religion, among other applications, are forced to compete for resources with foreign corporations focused on profit. However, it is this short-term focus that threatens extinction for the traditional lifeways of the Mapuche peoples and many other marginalised communities of facing the demands of development.     

Performance Evaluation of the SLEUTH Model in the Shenyang Metropolitan Area of Northeastern China

Performance evaluation is crucial for the development and improvement of an urban cellular automata model, such as SLEUTH. In this paper, we employed multiple methods for map comparison and model validation to evaluate the simulation performance of the SLEUTH urban growth model in the Shenyang metropolitan area of China. These multiple methods included the relative operating characteristic (ROC) curve statistic, multiple-resolutions error budget, and landscape metrics. They were used to quantitatively examine model performance in terms of the amount and spatial location of urban development, urban spatial pattern and prediction ability. The assessment results showed that SLEUTH performed well in the way of the quantitative simulation of urban growth for this case study. Similar to other urban growth models, however, the simulation accuracy for spatial location of new development at the pixel scale and urban spatial pattern still needs to be improved greatly. These inaccuracies might be attributed to the structure and nature of SLEUTH, local urban development characteristics, and the temporal and spatial scale of its application. Finally, many valuable suggestions had been put forward to improve simulation performance of SLEUTH model for spatial location of urban development in the Shenyang metropolitan area.     

Sampling effort needed to estimate condition and species richness in the Ohio river, USA

The level of sampling effort required to characterize fish assemblage condition in a river for the purposes of bioassessment may be estimated via different approaches. However, the goal with any approach is to determine the minimum level of effort necessary to reach some specific level of confidence in the assessment. In the Ohio River, condition is estimated and reported primarily at the level of pools defined by lock and dam structures. The goal of this study was to determine the minimum level of sampling effort required to adequately characterize pools in the Ohio River for the purpose of bioassessment. We followed two approaches to estimating required sampling effort using fish assemblage data from a long-term intensive survey across a number of Ohio River pools. First, we estimated the number of samples beyond which variation in the multimetric Ohio River Fish Index (ORFIn) leveled off. Then, we determined the number of samples necessary to collect approximately 90% of the fish species observed across all samples collected within the pool. For both approaches, approximately 15 samples were adequate to reduce variation in IBI scores to acceptable levels and to capture 90% of observed species in a pool. The results of this evaluation provide a basis not only for the Ohio River Valley Water Sanitation Commission (ORSANCO) but also states and other basin commissions to develop sampling designs for bioassessment that ensure adequate sampling of all assessment units.     

A Regional Assessment of Windbreak Habitat Suitability

The Environmental Monitoring and Assessment Programwas initiated in 1989 by the United StatesEnvironmental Protection Agency to collect, analyze,and report quantitative, statistically unbiasedinformation about the state of the nation'senvironment on a regional basis. During a pilotprogram in Nebraska we measured a habitat suitabilityindex for a probability sample of 40 windbreaks andexpanded the results to estimate the potential valueof windbreaks as wildlife habitat in Nebraska. Theindex estimates the suitability of a windbreak ashabitat for wildlife including breeding birds, smallmammals, and deer. Index values range from zero toone, where a value of one indicates maximal habitatvalue. We estimated that 50% (±13% at 90%confidence) of windbreaks in Nebraska have a habitatsuitability index of 0.25 or less and that nowindbreaks have a suitability index greater than 0.6. Our results indicate that increasing the area ofindividual windbreaks is the most effective way toimprove their value as wildlife habitat. Monitoringwindbreak condition over time would alert wildlifemanagers to changes in the resource that might affectwildlife populations. Because our data were highlyvariable, the power to detect change in habitatcondition between two measurement periods was low. Amuch larger sample would be required to detect smallchanges in habitat condition. Variability may bereduced, and power increased, by carefully andconsistently constructing the sampling frame, keepingdata collection as simple as possible, appropriatelystratifying sample selection, and using a small numberof well-trained data collection teams. However, wesuggest adapting the index for use with aerialphotography in future efforts to evaluate windbreaksas wildlife habitat in extensive areas.     

Structural characterization and thermal stabilities of the isomers of the brominated flame retardant 1,2,5,6-tetrabromocyclooctane (TBCO)

1,2,5,6-Tetrabromocyclooctane (TBCO) is a commercial brominated flame retardant that is employed mainly as an additive in textiles, paints and plastics. Very little is known about its presence or behavior in the environment or its analysis. TBCO can exist as two diastereomers, the stereochemistries of which have not been previously reported. We have named the first eluting isomer, under HPLC conditions, as alpha-TBCO (α-TBCO) and the later eluting isomer as beta-TBCO (β-TBCO) when using an Acquity UPLC BEH C₁₈ column with methanol/acetonitrile/water as the mobile phase. The structural elucidation of these two isomers was accomplished by ¹H NMR spectroscopy, GC/MS, LC/MS and X-ray structure determinations. α-TBCO is (1R,2R,5S,6S)-1,2,5,6-tetrabromocyclooctane and β-TBCO is rac-(1R,2R,5R,6R)-1,2,5,6-tetrabromocyclooctane. As with some other brominated cycloaliphatic compounds, TBCO is thermally labile and the isomers easily interconvert. A thermal equilibrium mixture of α- and β-TBCO consists of approximately 15% and 85% of these isomers, respectively. Separation of the two diastereomers, with minimal thermal interconversion between them, is achievable by careful selection of GC-capillary column length and injector temperature. LC/MS analyses of TBCO also presents an analytical challenge due to poor resolution of the isomers on chromatographic stationary phases, and weak intensity of molecular ions (or major fragment ions) when using LC-ESI/MS. Only bromide ions were seen in the mass spectra. APCI and APPI also failed to produce the molecular ion with sufficient intensity for identification.     

Fishers,Farms, and Forests in Eastern North America

The fisher (Martes pennanti) has recently recovered from historic extirpations across much of its geographic range. There are at least five explanations for the recovery of the fisher, including changes in the amount of habitat, the suitability of habitat, trapping pressure, societal attitudes toward predators, and climate. We evaluated a recovering fisher population in Ontario to test two conditions we viewed as necessary to support the hypothesis that fisher populations have increased due to an increase in the amount of forested land. First, we tested whether the amount of forested land has increased. Second, we tested whether contemporary fisher abundance (and therefore habitat quality) was related to the amount of forest. Topographic maps showed that the proportion of forested land in the study area had increased by 1.9% per decade since 1934 and 3.3% per decade since 1959, likely as a result of land conversion from agricultural uses. Overall the proportion of the study area that was forested increased from 29% to 40% during 1934 to 1995. Census data from the region indicated that there had been a decline in the amount of land area being farmed during the last 50 years. Recent livetrapping data showed that fisher abundance was positively related to the proportion of landscapes that were forested. Based on our results, we could not reject the hypothesis that an increase in the amount of forested land has contributed to the recovery of fisher populations.     

Waste: Striving for a more sustainable future

Governments everywhere are recognising environmental sustainability as a major driver of technological and economic development—with innovative direction being found at the interface of our efforts to become more socially and environmentally sustainable. Rural communities, faced with the pressures of unprecedented change, have an opportunity to embrace the principles of sustainable development, to create a new future at the leading edge of global change—but they need help. They need both knowledge and skills to enable them to self-evaluate and strategically plan, and they need a highly motivated, creative, and coherent community to carry it through. Small Towns: Big Picture is a community development process designed to foster creative, energetic, and collaborative action by five small rural communities in central Victoria—focusing on the development of social, environmental, and economic sustainability indicators. The project bought together artists, researchers and local communities to produce a coherent and shared understanding of the sustainability issues and opportunities. This paper presents Small Towns: Big Picture, focusing specifically on the social dimension and the development of a Community Cohesion indicator through an arts-led community engagement process.