Performance and diagnostic evaluation of ozone predictions by the Eta-Community Multiscale Air Quality Forecast System during the 2002 New England Air Quality Study

A real-time air quality forecasting system (Eta-Community Multiscale Air Quality [CMAQ] model suite) has been developed by linking the National Centers for Environmental Estimation Eta model to the U.S. Environmental Protection Agency (EPA) CMAQ model. This work presents results from the application of the Eta-CMAQ modeling system for forecasting ozone (O3) over the Northeastern United States during the 2002 New England Air Quality Study (NEAQS). Spatial and temporal performance of the Eta-CMAQ model for O3 was evaluated by comparison with observations from the EPA Air Quality System (AQS) network. This study also examines the ability of the model to simulate the processes governing the distributions of tropospheric O3 on the basis of the intensive datasets obtained at the four Atmospheric Investigation, Regional Modeling, Analysis, and Estimation (AIRMAP) and Harvard Forest (HF) surface sites. The episode analysis reveals that the model captured the buildup of O3 concentrations over the northeastern domain from August 11 and reproduced the spatial distributions of observed O3 very well for the daytime (8:00 p.m.) of both August 8 and 12 with most of normalized mean bias (NMB) within +/- 20%. The model reproduced 53.3% of the observed hourly O3 within a factor of 1.5 with NMB of 29.7% and normalized mean error of 46.9% at the 342 AQS sites. The comparison of modeled and observed lidar O3 vertical profiles shows that whereas the model reproduced the observed vertical structure, it tended to overestimate at higher altitude. The model reproduced 64-77% of observed NO2 photolysis rate values within a factor of 1.5 at the AIRMAP sites. At the HF site, comparison of modeled and observed O3/nitrogen oxide (NOx) ratios suggests that the site is mainly under strongly NOx-sensitive conditions (>53%). It was found that the modeled lower limits of the O3 production efficiency values (inferred from O3-CO correlation) are close to the observations.     

Atmospheric particle-bound polycyclic aromatic compounds over two distinct sites in Pakistan: Characteristics, sources and health risk assessment

Much attention is drawn to polycyclic aromatic hydrocarbons（PAHs） as an air pollutant due to their toxic, mutagenic and carcinogenic properties. Therefore, to understand the levels, seasonality, sources and potential health risk of PAHs in two distinct geographical locations at Karachi and Mardan in Pakistan, total suspended particle（TSP） samples were collected for over one year period. The average total PAH concentrations were 31.5 ± 24.4 and 199 ± 229 ng/m³ in Karachi and Mardan, re...     

Exploring the impact of new particle formation events on PM2.5 pollution during winter in the Yangtze River Delta, China

New particle formation（NPF） events are an increasingly interesting topic in air quality and climate science. In this study, the particle number size distributions, and the frequency of NPF events over Hefei were investigated from November 2018 to February 2019. The proportions of the nucleation mode, Aitken mode, and accumulation mode were 24.59%,53.10%, and 22.30%, respectively, which indicates the presence of abundant ultrafine particles in Hefei. Forty-six NPF events occurred during the obser...     

Adsorption characteristics of siloxanes in landfill gas by the adsorption equilibrium test

Due to the increase in energy cost by constantly high oil prices and the obligation to reduce greenhouse effect gases, landfill gas is frequently used as an alternative energy source for producing heat and electricity. Most of landfill gas utility facilities, however, are experiencing problems controlling siloxanes from landfill gas as their catalytic oxidizers are becoming fouled by silicon dioxide dust. To evaluate adsorption characteristics of siloxanes, an adsorption equilibrium test was conducted and parameters in the Freundlich and Langmuir isotherms were analyzed. Coconut activated carbon (CA1), coal activated carbon (CA2), impregnated activated carbon (CA3), silicagel (NCA1), and activated alumina (NCA2) were used for the adsorption of the mixed siloxane which contained hexamethyldisiloxane (L2), octamethylcyclotetrasiloxane (D4), and decamethylcyclopentasiloxane (D5). L2 had higher removal efficiency in noncarbon adsorbents compared to carbon adsorbents. The application of Langmuir and Freundlich adsorption isotherm demonstrated that coconut based CA1 and CA3 provided higher adsorption capacity on L2. And CA2 and NCA1 provided higher adsorption capacity on D4 and D5. Based on the experimental results, L2, D4, and D5 were converted by adsorption and desorption in noncarbon adsorbents. Adsorption affinity of siloxane is considered to be affect by the pore size distribution of the adsorbents and by the molecular size of each siloxane.     

The Fuzzy Synthesizing Evaluation of City''''s Environmental Quality Based on GIOWA Operator:A Case of 13 Cities of Jiangsu Province

1 INTRODUCTION In China, cities have been undergoing a rapid development in recent years. On the one hand, the level of urbanization rises continuously and a large population gathers in a city. The number and the scale of city increase and enlarge continuously. On the other hand, large population gathering in a city brings a huge pressure to the ecological environment of the city. The environmental pollution of the city is becoming more serious. This is a terrible and heavy cost for city…     

安徽省数字化地电场FFT频谱分析研究

采用傅里叶变换方法对安徽省地电场进行功率谱分析。结果显示,地电场在磁静日和磁扰日的显著周期不同,静日以24 h、12 h、8 h和6 h最为显著,扰日则以4.8 h、4 h显著;一个月的地电场中最显著的周期为12 h和12 h附近。不同台站相同方向的地电场数据具有相似的频谱,可以根据地电场的频谱来判断地电场数据的可靠性。     

Chemical characteristics of size-resolved aerosols in winter in Beijing

Size-resolved aerosols were continuously collected by a Nano Sampler for 13 days at an urban site in Beijing during winter 2012 to measure the chemical composition of ambient aerosol particles. Data collected by the Nano Sampler and an ACSM(Aerodyne Aerosol Chemical Speciation Monitor) were compared. Between the data sets,similar trends and strong correlations were observed,demonstrating the validity of the Nano Sampler. PM10 and PM2.5concentrations during the measurement were 150.5 ± 96.0 μg/m3(mean ± standard variation)and 106.9 ± 71.6 μg/m3,respectively. The PM2.5/PM10 ratio was 0.70 ± 0.10,indicating that PM2.5dominated PM10. The aerosol size distributions showed that three size bins of 0.5–1,1–2.5 and 2.5–10 μm contributed 21.8%,23.3% and 26.0% to the total mass concentration(TMC),respectively. OM(organic matter) and SIA(secondary ionic aerosol,mainly SO42-,NO3-and NH4+) were major components of PM2.5. Secondary compounds(SIA and secondary organic carbon) accounted for half of TMC(about 49.8%) in PM2.5,and suggested that secondary aerosols significantly contributed to the serious particulate matter pollution observed in winter. Coal burning,biomass combustion,vehicle emissions and SIA were found to be the main sources of PM2.5. Mass concentrations of water-soluble ions and undetected materials,as well as their fractions in TMC,strikingly increased with deteriorating particle pollution conditions,while OM and EC(elemental carbon) exhibited different variations,with mass concentrations slightly increasing but fractions in TMC decreasing.     

氧含量对甲烷及丙烯爆炸特性的影响

为了进一步研究烷烃类气体在与氧气接触时的爆炸特性规律,对烃类气体爆炸理论、爆炸特性参数做了理论分析和计算,并以甲烷和丙烯为例,通过对其爆炸极限、爆炸压力、爆炸压力上升速率、爆炸指数的测试,探讨了氧含量对烃类气体爆炸特性的影响。测试结果表明:氧含量的增加能提升其最大爆炸压力,当氧含量达到一定值时,理论计算值已不适用;提高甲烷爆炸极限的宽度,对其爆炸上限影响十分显著,但对爆炸下限的影响并不明显;对爆炸压力上升速率也有巨大的促进作用,当氧含量提高时,爆炸压力上升速率可能提升数十倍;并测得了丙烯在80℃,表压0.14MPa条件下的极限氧含量值(LOC)。总之,氧含量的增加对烃类气体爆炸特性的促进作用是十分显著的。