Metal exposures in an inner-city neonatal population

ObjectivesWe measured concentrations of lead (Pb), manganese (Mn), chromium (Cr), and copper (Cu) in umbilical cord whole blood and examined sources of environmental Pb exposures in a predominantly African-American population.MethodsBetween April and July 2006, we collected reproductive histories, questionnaires, and blood samples from 102 women, aged 16–45 years, who delivered at a Memphis, TN hospital.ResultsThe prevalence of preeclampsia and low birth weight infancy in the study population was 11% and 10%, respectively. Twenty-eight percent of mothers reported living near a potential Pb-contaminated area, while 43% lived in a residence built before 1978. Geometric mean (GM) concentrations for umbilical cord blood in the study population were 1.3, 3.5, 9.0, and 52.0 µg/dL for Pb, Mn, Cr, and Cu, respectively. Six neonates had cord blood Pb (CBL) concentrations above 10 µg/dL, while 20 had CBL concentrations ≥ 2 µg/dL. GM umbilical CBL levels were higher in neonates born to women living near a potential Pb-contaminated area (2.2 vs. 1.1 µg/dL) and those with friends, family or household members exposed to lead products (1.6 vs. 1.1 μg/dL). Some evidence of an exposure–response relationship was also detected between all four metal concentrations and an increasing number of maternal lead exposures. After adjustment for confounding, proximity to a Pb-contaminated area was the strongest environmental determinant of CBL levels among neonates with CBL concentrations of ≥ 2 µg/dL (odds ratio = 5.1; 95% CI = 1.6, 16.7).ConclusionsMetal concentrations were elevated in this population, and CBL levels were associated with proximity to Pb-contaminated areas.     

Cost/Benefit Considerations for Recent Saltcedar Control,Middle Pecos River,New Mexico

Major benefits were weighed against major costs associated with recent saltcedar control efforts along the Middle Pecos River, New Mexico. The area of study was restricted to both sides of the channel and excluded tributaries along the 370 km between Sumner and Brantley dams. Direct costs (helicopter spraying, dead tree removal, and revegetation) within the study area were estimated to be $2.2 million but possibly rising to $6.4 million with the adoption of an aggressive revegetation program. Indirect costs associated with increased potential for erosion and reservoir sedimentation would raise the costs due to increased evaporation from more extensive shallows in the Pecos River as it enters Brantley Reservoir. Actions such as dredging are unlikely given the conservative amount of sediment calculated (about 1% of the reservoir pool). The potential for water salvage was identified as the only tangible benefit likely to be realized under the current control strategy. Estimates of evapotranspiration (ET) using Landsat TM data allowed estimation of potential water salvage as the difference in ET before and after treatment, an amount totaling 7.41 million m³ (6010 acre-ft) per year. Previous saltcedar control efforts of roughly the same magnitude found that salvaged ET recharged groundwater and no additional flows were realized within the river. Thus, the value of this recharge is probably less than the lowest value quoted for actual in-channel flow, and estimated to be < $63,000 per year. Though couched in terms of costs and benefits, this paper is focused on what can be considered the key trade-off under a complete eradication strategy: water salvage vs. erosion and sedimentation. It differs from previous efforts by focusing on evaluating the impacts of actual control efforts within a specific system. Total costs (direct plus potential indirect) far outweighed benefits in this simple comparison and are expected to be ongoing. Problems induced by saltcedar control may permanently reduce reservoir capacity and increase reservoir evaporation rates, which could further deplete supplies on this water short system. These potential negative consequences highlight that such costs and benefits need to be considered before initiating extensive saltcedar control programs on river systems of the western United States.     

Manipulation of snow in small headwater catchments at Storgama, Norway: effects on leaching of inorganic nitrogen

We have manipulated the winter-time soil temperature regime of small headwater catchments in a montane heathland area of southern Norway to study the possible effects on concentrations and fluxes of inorganic nitrogen in runoff. The experiments included extra insulation of soils in two catchments to prevent subzero temperatures during winter, and removal of snow in two other catchments to promote soil frost. Increased soil temperatures during winter increased the springtime concentrations and fluxes of ammonium (NH4) and nitrate (NO3) in runoff. By contrast, snow removal with development of significant soil frost showed no systematic effects on mean concentrations or fluxes of inorganic N. The results from our experiments suggest that warmer soils during winter caused by exceptionally mild winters, or alternatively a heavy snowpack, imply a greater risk for inorganic N leaching in this region than a possible increase of soil frost events because of reduced snow cover.     

Effect of climate change on fluxes of nitrogen from the Tovdal River basin, Norway, to adjoining marine areas

The mass transport model TEOTIL was used to project nitrate (NO3) fluxes from the Tovdal River basin, southernmost Norway, given four scenarios of climate change. Forests, uplands, and open water currently account for 90% of the NO3 flux. Climate scenarios for 2071-2100 suggest increased temperature by 2-4 degrees C and precipitation by 3-11%. Climate experiments and long-term monitoring were used to estimate future rates of nitrogen (N) leaching. More water will run through the terrestrial catchments during the winter but less will run in the spring. The annual NO3 flux from the Tovdal River to the adjoining Topdalsfjord is projected to remain unchanged, but with more NO3 delivered in the winter and less in the spring. Algal blooms in coastal waters can be expected to occur earlier in the year. Major sources of uncertainty are in the long-term fate of N stored in soil organic matter and the impacts of forest management.     

Projected stream water fluxes of NO3 and total organic carbon from the Storgama headwater catchment, Norway, under climate change and reduced acid deposition

Fluctuations in the 20-year record of nitrate (NO3) and total organic carbon (TOC) concentrations and fluxes in runoff at the small headwater catchment Storgama, southern Norway, were related to climate and acid deposition. The long-term decline in NO3 related to reduced NO3 deposition and increased winter discharge, whereas the long-term increase in TOC related to reduced sulfur deposition. Multiple regression models describing long-term trends and seasonal variability in these records were used to project future concentrations given scenarios of climate change and acid deposition. All scenarios indicated reduced NO3 fluxes and increased TOC fluxes; the largest projected changes for the period 2071-2100 were -86% and +24%, respectively. Uncertainties are that the predicted future temperatures are considerably higher than the historical record. Also, nonlinear responses of ecosystem processes (nitrogen [N] mineralization) to temperature, N-enrichment of soils, and step-changes in environmental conditions may affect future leaching of carbon and N.     

Monitoring of Benzene in Ambient Air with Organic Vapor Badges

The original Texas Intersection Model (TEXIN) for air quality near street intersections has been widely adopted across the nation. At the request of transportation agencies from several states, the TEXIN model was revised to improve its performance and flexibility. The new capabilities include T-intersections, one-way streets, four-way stops, inspection/maintenance capabilities, anti-tampering programs and a short-cut emissions algorithm. TEXIN2 uses the CMA procedures for estimating traffic flow parameters, MOBILE3 to determine free flowing traffic cruise emissions, and CALINE3 to model the pollutant distribution downwind of an intersection. The new model, TEXIN2, offers the user more accurate simulations with enhanced versatility while still requiring a minimal amount of input data.     

Performance Audits of EPA Protocol Gases and Inspection and Maintenance Calibration Gases

Air pollution abatement policies must be based on quantitative information on current and future emissions of pollutants. As emission projections uncertainties are inevitable and traditional statistical treatments of uncertainty are highly time/resources consuming, a simplified methodology for nonstatistical uncertainty estimation based on sensitivity analysis is presented in this work. The methodology was applied to the “with measures” scenario for Spain, concretely over the 12 highest emitting sectors regarding greenhouse gas and air pollutants emissions. Examples of methodology application for two important sectors (power plants, and agriculture and livestock) are shown and explained in depth. Uncertainty bands were obtained up to 2020 by modifying the driving factors of the 12 selected sectors and the methodology was tested against a recomputed emission trend in a low economic-growth perspective and official figures for 2010, showing a very good performance.

Implications:?A solid understanding and quantification of uncertainties related to atmospheric emission inventories and projections provide useful information for policy negotiations. However, as many of those uncertainties are irreducible, there is an interest on how they could be managed in order to derive robust policy conclusions. Taking this into account, a method developed to use sensitivity analysis as a source of information to derive nonstatistical uncertainty bands for emission projections is presented and applied to Spain. This method simplifies uncertainty assessment and allows other countries to take advantage of their sensitivity analyses.     

Measurement of Indoor Air Emissions from Dry-Process Photocopy Machines

Abstract

Presently, no standard test method exists to evaluate the various emissions from office equipment (e.g., ozone, volatile organic compounds, inorganic gases, and particulates) so it is difficult to compare data from different studies.1 As a result, the authors are developing a standardized guidance document for measuring indoor air emissions from office equipment. The ultimate goal is to apply the test method to better understand emissions from office equipment and to develop lower emitting machines. This paper provides background information on indoor air emissions from office equipment with an emphasis on dry-process photocopy machines. The test method is described in detail, along with the results of a study to evaluate the test method using four dry-process photocopy machines.

The results from this study indicate that the test method provides acceptable performance for characterizing emissions; that it can adequately identify differences in emissions between machines both in compounds emitted and their emission rates; and that it is capable of measuring both intra- and inter-machine variability in emissions. Challenges and complications were encountered in developing and implementing the test method. These included heat generation, which can cause large increases in chamber temperature; finite paper supplies for photocopy machines, which limit test duration; varying power requirements that may require changes in chamber electrical supply; and remote starting of the machines, which is necessary to maintain chamber integrity.

Results show that dry-process photocopy machines can produce emissions of ozone and volatile organic compounds that can potentially have a significant impact on indoor air quality. For the four machines tested in this study, the compounds with the highest emission rates overall were ethylbenzene (28,000 µg/hour), m,p-xylenes (29,000 µg/hour), o-xylene (17,000 µg/hour), 2-ethyl-lhexanol (14,000 µg/hour), and styrene (12,000 fig/hour). Although many of the same compounds tended to be detected in emissions from each of the four photocopiers, the relative contribution of individual compounds varied considerably between machines, with differences greater than an order of magnitude for some compounds.     

Modelling the joint effects of a metal and a pesticide on reproduction and toxicokinetics in Lumbricid earthworms

It is important to understand the aetiology of interactive mixtures effects (i.e. synergism and antagonism) if results from known cases are to be extrapolated to untested combinations. The key role of toxicokinetics in determining internal concentrations at target sites means that understanding chemical uptake in mixtures is an essential requirement for mechanistic understanding of interactions. In this paper, a combined approach using mixture toxicity testing, toxicokinetic studies and modelling has been used to address the link between joint toxicity and internal concentration. The study is conducted in Lumbricid earthworms with a binary mixture of a metal (nickel) and an organophosphate insecticide (chlorpyrifos) not a priori expected to show interactive toxicity. As expected from their dissimilar modes of action and detoxification, exposure to combinations of nickel and chlorpyrifos resulted in additive toxicity. Measurement of internal concentrations indicated that both chemicals were rapidly accumulated (within 3 days) to equilibrium. When exposed as a mixture, Ni uptake followed the same pattern as found for the single chemical. This was not the case for chlorpyrifos which showed a faster rate of uptake and elimination and a slightly higher equilibrium concentration in a mixture. That the difference in chlorpyrifos kinetics in the mixture did not result in interactive toxicity highlights the need to assess chemical toxicodynamics as well as toxicokinetics. Measurement of chlorpyrifos-oxon identified the presence of this toxic form but implementation of more complex approaches encompassing toxicogenomics and epigenetics are ultimately needed to resolve the toxicokinetic to toxicodynamic link for these chemicals.     

Sequential concentration of bacteria and viruses from marine waters using a dual membrane system

The ability to rapidly and effectively concentrate diverse microbes is an essential component for monitoring water quality at recreational beaches. The purpose of this study was to develop a 0.45 microm pore size dual membrane system, which can sequentially concentrate both viruses and bacteria. The top PVDF membrane was used to filter bacteria by physical straining while the bottom HA membrane retained viruses through adsorption. The recovery of this system was assessed using test organisms: enterococci and somatic coliphage. Volumes of 100 to 400 mL of unspiked and sewage-spiked beach water were filtered through both types of membranes. The PVDF membrane recovered statistically equivalent amounts of enterococci when compared to traditional membranes. All of the coliphage passed through the PVDF membrane, while 22% passed through the HA membrane. Increasing the volume from 100 to 400 mL did not significantly influence recoveries. Up to 35% of coliphage was eluted from the bottom membrane using beef extract solution. Rinsing bottom membranes with 0.5 mmol L(-1) H(2)S0(4) was found to deactivate somatic coliphage. This research demonstrates the potential of using a dual membrane adsorption system for the concentration of both bacteria and viruses from recreational beaches. A proposed bi-layer filtration system can be designed for simultaneous bacteria and virus filtration. Future experiments should focus on measurements utilizing additional bacteria and viruses.