Efforts to develop regulations in Korea similar to the US maximum achievable control technology (MACT) regulations for hazardous waste incinerators

The development of regulations patterned after the United States’ requirement for maximum achievable control technology (MACT) to control hazardous air pollutants from major industrial sources in Korea is in progress. Current management practices and installed air pollution control devices were surveyed; emission tests and continuous emission data collected from facilities under operation were assessed considering other MACT requirements such as reporting, report keeping requirements. Emission sampling and air pollutant analysis were carried out at representative hazardous waste incinerators installed with wet-type and dry-type air pollution control devices. Korean and United States Environmental Protection Agency methods were used for sampling and analysis. The major heavy metals emitted were Zn, Ni, Pb, and Cr. The heavy metal removal efficiency of existing air pollution control devices was greater than 99%. The average mercury removal efficiency was more than 30%. Toluene; m,p-xylene; o-xylene; benzene; dichloromethane; styrene; ethylbenzene; 1,3-dichlorobenzene; and 1,2,4-trimethylbenzene were the major volatile organic compounds emitted. The emissions from field tests were compared, reviewed, and analyzed with respect to MACT regulations to check applicability. Finally, draft guidelines were suggested for effective hazardous air pollutant management in Korea.     

The application of a mulch biofilm barrier for surfactant enhanced polycyclic aromatic hydrocarbon bioremediation

Lab scale mulch biofilm barriers were constructed and tested to evaluate their performance for preventing the migration of aqueous and surfactant solubilized PAHs. The spatial distribution of viable PAH degrader populations and resultant biofilm formation were also monitored to evaluate the performance of the biobarrier and the prolonged surfactant effect on the PAH degrading microorganism consortia in the biobarrier. Sorption and biodegradation of PAHs resulted in stable operation of the system for dissolved phenanthrene and pyrene during 150 days of experimentation. The nonionic surfactant could increase the solubility of phenanthrene and pyrene significantly. However, the biobarrier itself couldn't totally prevent the migration of micellar solubilized phenanthrene and pyrene. The presence of surfactant and the resultant highly increased phenanthrene or pyrene concentration didn't appear to cause toxic effects on the attached biofilm in the biobarrier. However, the presence of surfactant did change the structural composition of the biofilm.     

Cell-wall morphology correlated with vertical migration in the non-motile marine dinoflagellate Pyrocystis noctiluca

 We report an ultrastructural study of the morphological changes in cells of the marine dinoflagellate Pyrocystis noctiluca Murray, which correlate with its vertical migration pattern. Cells alternate between a large, highly vacuolated, positively buoyant, vegetative cyst surrounded by a dinosporin-containing wall and a smaller, more compact, negatively buoyant, cellulose-bounded cell. The cyst wall is composed of two layers: a thin smooth outer layer, thought to be composed of dinosporin, and a thick inner layer that likely to be cellulosic. One or two thecate cells are formed from within the cysts. Thecate cells are smaller, more compact and contain many small translucent bodies. They are surrounded by a typical dinoflagellate amphiesmal layer composed of membranes and cellulose plates. The amphiesmal layer appears only in recently divided cells and exists for only one night. By the following day, the cellulose wall has been replaced by a new dinosporin wall synthesized from beneath the cellulose thecal layer. The cyst stage is suggested as being optimized for photosynthesis, whereas the compact, negatively buoyant, thecate form is thought to allow nutrient uptake in deeper waters. Vertical migration in this species is thus correlated with the presence of dinosporin wall during most of its stay in the upper waters, alternating with a brief thecate wall in deeper nutrient-rich waters. This is the first report correlating dinoflagellate vertical migration with changes in cell-wall composition. Received: 28 July 1999 / Accepted: 8 May 2000     

Mass Load-Based Pollution Management of the Han River and Its Tributaries, Korea

Spatio-temporal variations of biochemical oxygen demand (BOD) and total coliform (TC) in the Han River, Korea, were investigated in terms of concentration-based and mass loading-based approaches. Considering the river water quality criteria regulated by the Ministry of Environment in Korea, the tributaries linked to the mainstream of the Han River were found to be highly contaminated with respect to both BOD and TC and, in fact, most of the tributaries exceeded the maximum water quality criteria. To evaluate the pollution impact of tributaries on the mainstream, the monthly water quality monitoring data for six years (from 1995 to 2000) were collected from the Han River basin, and statistically analyzed using Pearson’s correlation coefficient. The results revealed that mass loading-based approach was superior to the concentration-based approach for effective Han River watershed management. Overall results supported that the mass loading-based approach associated with total maximum daily loads (TMDL) management would be a useful and suitable protocol in watershed management for improving the water quality of the Han River and protecting public health. Therefore, this study supporting TMDL management can be applicable to a wide array of contaminants and watershed settings in Korea.     

Stressor identification and health assessment of fish exposed to wastewater effluents in Miho Stream, South Korea

This study evaluated the effects of an industrial wastewater treatment plant (IWTP) and a municipal wastewater treatment plant (MWTP) effluents on a variety of bioindicators ranging from biochemical, organism, and population-level responses in pale chub (Zacco platypus) and fish community structure. The Index of Biotic Integrity (IBI) indicated that the site upstream of these wastewater treatment plant discharges is in fair–good condition and downstream of the plant is in poor condition. The EROD (ethoxyresorufin-O-deethylase) activity, condition factor, and liver somatic index were significantly increased at the downstream site compared to those of the upstream site. The most significant change observed in pale chub population in the downstream site of the Miho Stream, relative to the upstream population, was the total absence of an younger age group. Stressors impacting the downstream site were identified as mostly organic or nutrient enrichment and habitat degradation associated with wastewater treatment plants. The results of causal analysis suggest that the primary causes affecting fish population in the downstream site are through both size-selective mortality caused by ammonia toxicity and recruitment failure caused by habitat degradation and reproduction problem due to an IWTP and MWTP effluents.     

Effects of water vapor pretreatment time and reaction temperature on CO(2) capture characteristics of a sodium-based solid sorbent in a bubbling fluidized-bed reactor

CO(2) capture from flue gas using a sodium-based solid sorbent was investigated in a bubbling fluidized-bed reactor. Carbonation and regeneration temperature on CO(2) removal was determined. The extent of the chemical reactivity after carbonation or regeneration was characterized via (13)C NMR. In addition, the physical properties of the sorbent such as pore size, pore volume, and surface area after carbonation or regeneration were measured by gas adsorption method (BET). With water vapor pretreatment, near complete CO(2) removal was initially achieved and maintained for about 1-2min at 50 degrees C with 2s gas residence time, while without proper water vapor pretreatment CO(2) removal abruptly decreased from the beginning. Carbonation was effective at the lower temperature over the 50-70 degrees C temperature range, while regeneration more effective at the higher temperature over the 135-300 degrees C temperature range. To maintain the initial 90% CO(2) removal, it would be necessary to keep the regeneration temperature higher than about 135 degrees C. The results obtained in this study can be used as basic data for designing and operating a large scale CO(2) capture process with two fluidized-bed reactors.     

A cross-validation of safety climate scale using confirmatory factor analytic approach

PROBLEM: Given the lack of a consistent factor structure of safety climate, this study tested the stability of a factor structure of a safety climate scale developed through an extensive literature review using confirmatory factor analytic approach and cross-validation. METHODS: A cross-sectional sample of 722 U.S. grain industry workers participated in the questionnaire survey. RESULTS: The safety climate scale developed through the generation of an item pool based on a table of specifications, subsequent scientific item reduction procedures, reviews from experts, and pilot test yielded adequate reliabilities for each dimension. Each item showed proper discriminative power based on both internal and external criteria. Criterion validity was manifested by the significant positive correlation of the scale with five criteria. Evidence of construct validity was provided by both exploratory and confirmatory factor analyses. Both calibration and validation samples supported a consistent factor structure. Management commitment and supervisor support were found to influence other dimensions of safety climate. DISCUSSION: This study provides an insight into the primary reason why previous attempts have failed to find a consistent factor structure of safety climate: No specification of the influence of management commitment and supervisor support on other dimensions of safety in their models. IMPACT ON INDUSTRY: The findings of this study provide a framework upon which accident prevention efforts can be effectively organized and underscore the importance of management commitment and supervisor support as they affect employee safety perceptions.     

Safety beliefs and safe behavior among midwestern college students

PROBLEM: This study investigated the impact of safety beliefs on safe behavior and the effect of age, gender, class standing, and geographic region on these beliefs and behaviors. It also compares the level of safety beliefs and safe behavior of Midwestern college students in 1993 to those in 2002. METHOD: A total of 1,059 undergraduate students at four Midwestern universities completed the 33-item questionnaire developed by Crowe (J. Saf. Res. 26 (1995) 187) during the spring semester of 2002. RESULTS: Significant main effects for gender and age on safety beliefs and safe behavior were found as well as a significant interaction between gender and age for both outcome variables. The regression model with the independent variables of personal responsibility and gender yielded a multiple R of.58, which explained 34% of the variance of the self-reported safe behavior. Midwestern college students in 2002 were found less safety-conscious in terms of self-reported safety beliefs and safe behavior than those in 1993. DISCUSSION: The findings indicate that safety education of adolescents and young adults in the United States has not been effective, at least for the last decade, or today's social and school environment is less conducive to the students' safe behavior and beliefs than a decade ago. IMPACT ON INDUSTRY: Proactive multidisciplinary approaches to enhance safe behavior and beliefs of young adults should be made based on critical evaluation of current approaches.     

Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea

An end-of-life vehicle (ELV) is dismantled to recover and recycle any re-usable parts, then shipped to the shredding facility for further recovery of iron with any remaining Automobile Shredder Residue (ASR) to be considered as wastes and to be disposed of by either thermal treatment or landfill. Overall ELVs management status in Korea, including recycling resulting from the dismantling processes, was surveyed using some questionnaires given to dismantlers and other available information to provide some feasible means for future treatment. The averaged recycle rate in the dismantling stage showed a value of 44% and the rest of an ELV was then compressed and transported to shredding companies to recover mainly the iron content which averaged 38.7% of the mass of a new vehicle. The non-ferrous metals such as copper, antimony, zinc and aluminum accounted for only 1.5%. The Shredder dusts (SDs) were found to be composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. Dumping of fluff and inorganic residues into a landfill site, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car as done in European countries and Japan. The detailed characteristics of SDs were investigated to provide an idea of how to treat them in order to meet a future expected enforcement.