日本东京供水管网的漏损预防管理

供水管网的漏损控制管理是城市水资源管理以及节水管理中的重要环节,东京作为国际上管网漏损控制最优秀的城市之一,漏损率从1955年战后恢复时期的20％控制到2007年的3．3％。多年来,东京在漏损控制技术和管理方面积累了丰富的优秀经验,并且建立了完善的供水管网漏损预防管理体系,指出为了保证有效的漏损控制和预防,必须做到以下四个方面,即准确掌握管网属性信息、重视管网的维护和更新、不断发展漏损控制与预防技术及重视人力资源管理及人才培养。东京成功的漏损控制经验可以从管理体制、管理手段、技术研发、人才培养等方面对中国的供水管网漏损管理及节水管理提供有益的借鉴经验。     

Diurnal variations of polycyclic aromatic hydrocarbons associated with PM2:5 in Shanghai, China

Forty-eight daily time interval PM2:5 samples were collected from December 2006 to January 2008 in an urban site in Shanghai, China. Concentrations and compositions of polycyclic aromatic hydrocarbons (PAHs) were analyzed with GC-MS to study the diurnal and seasonal variations and to identify the main emitting sources. The diurnal variation of the PAHs concentrations was greater in the late autumn and winter sampling days, and was greatly influenced by meteorological conditions such as wind speed and ambient temperature. The concentration of PAHs in the mornings (6:30–10:00) increased distinctly, and was high in the late autumn and winter sampling days, indicating the contribution from vehicle emissions during rush hours. The diurnal variation of the high molecular weight PAHs did not seem to be controlled by the shift of gas-particle partitioning due to temperature variation, instead, it could be indicative of the variation in the source. Statistical analyses showed that the concentrations of PAHs were negatively correlated with temperature and wind speed, and positively correlated with relative humidity. Diagnostic ratios of PAHs suggested mixed emission sources of petroleum and coal/biomass combustion for PAHs in the PM2:5 in Shanghai.     

Composition, source, mass closure of PM2:5 aerosols for four forests in eastern China

PM2.5 aerosols were collected in forests along north latitude in boreal-temperate, temperate, subtropical and tropical climatic zones in eastern China, i.e., Changbai Mountain Nature Reserve (CB), Dongping National Forest Park in Chongming Island (CM), Dinghu Mountain Nature Reserve (DH), Jianfengling Nature Reserve in Hainan Island (HN). The mass concentrations of PM2.5, organic carbon (OC), elemental carbon (EC), water soluble organic carbon (WSOC) as well as concentrations of ten inorganic ions (F-, Cl-, NO3-, SO42-, C2O42-, NH4+, Na+, K+, Ca2+, Mg2+) were determined. Aerosol chemical mass closures were achieved. The 24-hr average concentrations of PM2.5 were 38.8, 89.2, 30.4, 18 μg/m3 at CB, CM, DH and HN, respectively. Organic matter and EC accounted for 21%-33% and 1.3%-2.3% of PM2.5 mass, respectively. The sum of three dominant secondary ions (SO42-, NO3-, NH4+) accounted for 44%, 50%, 45% and 16% of local PM2.5 mass at CB, CM, DH and HN, respectively. WSOC comprised 35%-65% of OC. The sources of PM2.5 include especially important regional anthropogenic pollutions at Chinese forest areas.     

填料对曝气生物滤池影响的概述

曝气生物滤池因为其优越的自身条件,逐渐成为世界各国首选的处理各种污水的处理装置。而填料作为曝气生物滤池最关键影响因素引起广泛关注。文章简单介绍了填料的研究进展,对填料上生物膜的形成以及其填料净化机理等方面进行了研究;填料的选择是滤池设计和出水水质的关键因素。填料的类型、粒径、密度、高度对曝气生物滤池的效能有重要影响。尽管目前填料种类繁多,但由于曝气生物滤池除磷能力较弱,希望开发更多新型曝气生物滤池填料类型,更好地满足各种类型废水的处理。     

乙蒜素乳油在黄瓜和土壤中的残留消解动态

采用田间试验,对乙蒜素乳油在长沙、广州、山东、北京四地的黄瓜及土壤中的残留进行了研究,结果表明乙蒜素在黄瓜中的消解速度较快,乙蒜素在黄瓜中半衰期分别为广州3．47d,长沙1．37d,山东2．10d,北京3．18d;乙蒜素在土壤中半衰期分别为广州3．34d,长沙2．46d,山东2．60d,北京2．89d;41％乙蒜素乳油兑水稀释1500倍（乙蒜素浓度为33．75mg·L^-1）,使用2次,末次施药7d后,乙蒜素在未检出-0．011mg·kg^-1,在土壤中为未检出。该药属于易降解农药（T1/2〈30d）,按推荐剂量使用是安全的。     

Experimental investigation of the machining induced residual stress tensor under mechanical loading

Residual stress induced by machining is complex and difficult to predict, since it involves mechanical loads, temperature gradients or phase transformation in the generation mechanism. In this work, an experiment with a statistical design for the residual stress tensor was performed to investigate the residual stress profile on a machined surface. In order to understand the generation mechanism of residual stress in machining, three variables and workpiece materials were carefully selected to focus on the mechanical loads and avoid the temperature gradients and phase transformation on the machined surface. The mechanical loads considered here included the chip formation force at the primary shear zone and the plowing force at the tool tip–workpiece contact. Depths of cut and rake angles were selected to alter the chip formation force, and the tool tip radius was designed to emphasize the plowing effect. The workpiece material was aluminum 3003. The experimental results showed that the chip formation force provides basic shapes of the residual stress profile for a machined surface. It decides the depth of the peak residual stress below the surface. However, the plowing force was the dominating effect on the surface residual stress, causing high stresses on the surface. The plowing force can shift the surface stress from tensile to compressive. Additionally, the measured stress tensor proved that in-plane shear stress exists for the machined surface.     

基于EPANET-MSX的多组分给水管网水质模型的开发与应用

基于EPANET-MSX工具包开发了机制性的多组分给水管网水质模型,模型将管段概化为管壁、生物膜、液膜和液相4个组成部分.模拟过程包括基质利用和微生物生长、微生物衰减和死亡、溶解性物质的液膜传质、不溶性物质的吸附和脱落、余氯与有机物的氧化和卤代反应以及管壁腐蚀消耗余氯等.模拟变量共15个,包括生物膜和液相中各7个变量,即溶解性有机物、不溶性有机物、氨氮、余氯、异养菌、自养菌和惰性颗粒,以及管壁生物膜厚度.利用管段模拟实验数据进行模型验证,模型对余氯和浊度的模拟精度分别为0.1 mg/L和0.3 NTU.案例研究的模拟结果合理地反映了给水管网中余氯和浊度的动态变化特征,而同时考虑水厂出水水质可变性和参数不确定性的Monte Carlo模拟则可用于评价案例给水管网的水质超标风险.     

Optimization of parameters on photocatalytic degradation of chloramphenicol using TiO2 as photocatalyist by response surface methodology

The experimental design methodology was applied for modeling and optimizing the operation parameters on photocatalytic degradation of chloramphenicol (CAP) using TiO2 as photocatalyst in a photoreactor. Three experimental parameters (including pH, TiO2 concentration and CAP initial concentration) were adopted to obtain the preliminary information. The multivariate experimental design was employed to establish a quadratic model as a functional relationship between the degradation rate of CAP and three experimental parameters. The interaction e ects and optimal parameters were obtained by using Design Expert software. The optimal values of the operation parameters under the related constraint conditions were found at pH 6.4, TiO2 concentration of 0.94 g/L and CAP initial concentration of 19.97 mg/L, respectively. The degradation rate of CAP approached 85.97% under optimal conditions. The regression analysis with R2 value of 0.9519 had a good agreement between the experimental results and the predictive values. In addition, pH and TiO2 concentration had a significant influence on the degradation rate of CAP.     

微波协同活性炭催化氧化处理含酚废水的研究

在微波辐射条件下,采用活性炭处理含酚废水。结果表明微波催化氧化工艺对苯酚的处理效果明显优于单纯活性炭吸附与单纯微波辐射工艺。通过正交实验得出微波处理的最佳条件：活性炭用量1.0 g,微波功率600 W,微波时间3 min。在该条件下,选用2号活性炭对苯酚浓度为600 mg/L的模拟水样进行处理,含酚废水中的酚去除率达到67.79%。     

污泥土地利用中重金属铜在土壤中的迁移行为

研究通过模拟土柱淋溶实验来研究污泥土地利用中重金属铜在土壤中的迁移行为。结果表明污泥土地利用会明显增加土壤中铜的总量,但大部分集中在40 cm以上的土壤中。通过BCR连续提取法发现,经淋溶后耕作层（0 cm~30 cm）土壤中的铜仍然以残渣态为主（占50%以上）,但能被植物利用的酸溶/可交换态和可还原态铜有了明显的增加。与去离子水相比,模拟酸雨（pH=4.5）会使土壤中铜的淋溶强度增加,并更能促使其向下迁移。