盐渍土环境中RC桥墩柱地震损伤试验研究与计算分析∗

为了研究盐渍土环境中RC桥墩柱的地震损伤,设计制作了10根RC桥墩柱,对其进行了电化学快速锈蚀试验及低周反复加载试验。试验中的主要设计参数为轴压比和锈蚀率。观察和记录了试件的开裂过程及破坏形态,通过实测数据绘制了构件的荷载—位移滞回曲线。在已有基础上提出了锈蚀RC桥墩柱在低周反复荷载作用下的双参数损伤模型,并对其进行了对比分析。试验结果表明:锈蚀率越大,滞回曲线捏缩现象越明显,滞回环面积逐渐减小,峰值荷载和极限位移也逐渐减小,试件耗能能力和延性明显降低,其损伤越来越严重;轴压比越大时,试件极限变形越差,耗能能力越低,其损伤越严重。通过与Mccabe损伤模型及Park-Ang损伤模型进行比较分析,得知该损伤模型更能准确反应构件的实际破坏程度,可为盐渍土环境中RC构件的损伤评估提供参考依据。     

原位洗脱技术对凉水河底泥中氮、磷释放特征的影响

为探讨新兴底泥原位修复技术—原位洗脱技术对城市河流凉水河底泥中氮、磷释放的抑制作用,于现场采集洗脱前后样品并设计室内静态模拟实验,分析了实验期间洗脱组和对照组上覆水中NH_4~+-N、NO_3~--N、TN、PO_4~(3-)-P、TP浓度和释放速率变化特征。结果表明:洗脱组释放第30天时,NH_4~+-N由底泥向上覆水中平均NH_4~+-N平均浓度为0.52 mg·L~(-1),较对照组下降了89.4%;PO_4~(3-)-P和TP平均释放速率较对照组降低了78.1%和83.0%,上覆水中TP平均浓度为0.22 mg·L~(-1),较对照组下降了68.1%。原位洗脱技术对底泥中NH_4~+-N、PO_4~(3-)-P释放的抑制作用主要通过对有机氮、磷物质的削减和水-沉积物界面还原环境的改善来实现。     

UV Spectroscopic Monitoring of Vaporized Monoaromatic Hydrocarbons from Petroleum-Contaminated Soils

Fast and simple systems using ultraviolet (UV) absorbance were examined for on-line monitoring of monoaromatic hydrocarbons from petroleum-contaminated soils in this research. Since soil particles hinder the UV light transmittance, the absorbance measurement of vaporized monoaromatic hydrocarbons in soil gas extracted from petroleum-contaminated soils was proposed. In the fixed system that exhibited higher sensitivity than the portable one, the absorbance intensity of benzene, toluene, ethylbenzene, and xylene increased in proportion to the concentration of the contaminants. The portable system, however, was suitable for screening purpose, while it exhibited faster response. There was no interference from water, which helps the applicability of the proposed systems to the actual fields.     

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.     

分子印迹技术在环境科学领域中的应用

分子印迹技术（MIT）是一门新兴的边缘科学技术,它的产生与发展为环境科学打开了又一视角。介绍了MIT的产生与发展及基本原理,综述了MIT在环境科学领域中的应用,主要包括MIT在固相萃取、膜分离、色谱分析、传感器及分子印迹聚合物作为催化剂在环境修复中的应用。     

SBR法处理豆制品废水工艺条件的研究

用SBR法处理豆制品废水的试验表明,该系统具有较好的抗负荷冲击能力,进水COD在300～2000 mg/L之间变化,对系统不造成任何影响;考察了曝气时间、曝气量和污泥浓度等对去除效果的影响,试验结果表明,曝气时间和曝气量对处理效果影响很大,确定该反应系统最佳曝气时间是8 h,适宜的曝气量是800 L/h,而污泥浓度控制在4000 mg/L左右时,处理效率最高,采用进水顶出水的排水方式是可行的,确定系统的最佳排水比是3/5.厌氧段的插入可以减少剩余污泥的产量.     

医疗废物焚烧中二恶英的产生及控制

医疗废物的安全处置一直被世界各国所重视,我国自SARS灾难后,强化了医疗废物的治理力度。本文针对目前主要采用焚烧法处置医疗废物过程中二恶英的生成途径进行了论述,并结合二恶英的分子结构、毒性及危害提出了控制对策与建议。     

基于SHERPA的环境空气质量减排情景模拟评估

分析了SHERPA综合评价模型的基本原理和主要建模理念,重点介绍了其在环境空气质量减排情景模拟评估方面的作用,以及在排放源与受体关系(SRR)方面的处理方法,比较了其与欧盟常用的其他情景模拟模型的优缺点。SHERPA模型的特点是空间灵活性较好,对于任何给定地点,可以快速评估不同地区对该研究地点空气质量的影响。SHERPA模型的3个主要功能为污染物来源分析、决策支持和情景模拟。基于SHERPA模型对法国环境空气中PM_(2.5)、PM_(10)和NO_2年均浓度进行污染来源分析、决策支持分析和减排情景模拟评估,展示了模型在环境治理措施优先级筛选和政府间联合治理措施协调建议方面的功能和作用,以期为中国环境空气质量预测预报、环境质量管理措施的制定和成效评估等环境服务与管理工作提供借鉴。     

基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.