浅谈火电厂烟气连续监测系统（CEM）

近几年，随着我国环境保护意识的不断提高，环境保护工作也日益加强，为了做到环境和经济持续协调发展，必须要求建设项目加强污染防治对策，加强环保管理部门的有效监督。火电厂装设烟气连续监测系统（CEM）就是对其大气污染物的排放进行连续监测，为生产运行和环保管理部门提供基础数据，本文介绍了电厂CEM系统的分析系统。     

海峡西岸清洁岛屿秋季VOCs特征及来源解析

挥发性有机物（VOCs）是臭氧（O₃）和二次有机气溶胶（SOA）的重要前体物.为夯实国内海岛背景点VOCs监测,研究海峡西岸清洁岛屿平潭VOCs污染特征及来源,探索化学二次生成对清洁岛屿O₃的影响,于2018年秋季,对平潭大气VOCs进行了监测研究.结果表明,平潭2018年秋季VOCs浓度为1.94~52.12 μg·m^-3,平均值为15.54 μg·m^-3,烷烃占比最高（66.02%）,乙烷为浓度的最大物种,达到6.82 μg·m^-3.平潭秋季VOCs浓度日变化呈双峰型,表现出典型的人类活动相关性.经比较甲苯/苯（T/B）可知,平潭秋季VOCs来源主要是交通排放及燃料蒸发.利用正交矩阵分解（PMF）源解析发现,汽车尾气（72.8%）、船舶排放（12.4%）、生物质燃烧（8.7%）、工业排放和溶剂使用（3.5%）和燃料蒸发（2.6%）是平潭VOCs的五大来源.平潭秋季VOCs的O₃生成潜势（OFP）差异较大,其中,烯烃（62.6%） > 烷烃（24.7%） > 芳香烃（12.7%）.当平潭O₃属于VOCs控制型时,控制大气中烯烃的浓度可一定程度上防治平潭O₃的污染.     

级进模结构CAD中装配模型的研究

本文认为模具结构设计是一个面向模具整体功能的装配设计过程.公式化描述了级进模结构特点,在分析并总结了现有“装配模型”的基础上,提出了一个支持级进模结构设计特点的“装配模型”.     

Effect of Xylanase–Laccase Synergistic Pretreatment on Physical–Mechanical Properties of Environment-Friendly Self-bonded Bamboo Particleboards

Diminishing wood supply and high formaldehyde emission from synthetic adhesive-bonded lignocellulose boards have become concerns. In this research, new adhesive-free boards made from xylanase–laccase-modified bamboo particles were developed. The bamboo particles were pretreated first with xylanase and then with laccase. The synergistic pretreatment was performed according to a Taguchi experiment that included six variables: xylanase treatment (enzyme concentration: 10, 20, 30 U/g; reaction pH: 8, 9, 10; reaction time: 30, 60, 90 min) and laccase treatment (enzyme concentration: 10, 20, 30 U/g; reaction pH: 2, 3, 4; reaction time: 30, 60, 90 min). The particles were hot-pressed to harvest the self-bonded boards, whose physical–mechanical properties were evaluated. The results showed that all six variables (except laccase reaction time) caused significant effects at 0.05 level on physical–mechanical properties of boards. The optimum pretreatment parameters were determined to be xylanase (20 U/g, pH 9, 60 min) and laccase (20 U/g, pH 4, 60 min). The optimized flexural strength, flexural modulus, internal bonding, and 2 h thickness swelling of boards met the highest requirements in Chinese national standard GB/T 4897 (2015) for particleboards. The performance of proposed boards was also better than that of reported self-bonded bamboo particleboards with only a laccase pretreatment.     

Off-design performance analysis of a transcritical CO2 Rankine cycle with LNG as cold source

The transcritical CO₂ Rankine cycle with liquefied natural gas (LNG) as cold source is a promising power system to utilize mid- and low-temperature heat source. Most previous works focused on thermodynamic and thermoeconomic analysis or optimization for the system. In this article, an off-design performance analysis for the system is conducted. An off-design mathematical model for the system is established to examine the variation of system performance with the variations of heat source mass flow rate and temperature. A modified sliding pressure regulation control strategy, which regulates turbine inlet pressure to keep the temperature difference between heat source temperature and turbine inlet temperature constant, is applied to control the system when off-design conditions happen. The results show that when the mass flow rate or the temperature of heat source is less or lower than that of design condition, both the net power output of system and the system exergy efficiency decrease, whereas when they are more or higher than the values of design condition, the net power output of system increases but the system exergy efficiency still decreases. In addition, both CO₂ turbine and NG turbine could almost keep the designed efficiency values under the applied control strategy.     

火炸药生产废水污染土壤修复的研究进展

总结了国内外化学修复法和生物修复法修复火炸药生产废水污染土壤的研究进展。比较了各种方法的优缺点,提出了未来火炸药生产废水污染土壤修复技术的研究方向。指出:应将物理修复法、化学修复法及生物修复法相结合,将修复定位于综合化、彻底化及可利用化,以期达到火炸药生产废水污染土壤的无害化治理。     

One-dimensional model for municipal solid waste (MSW) settlement considering coupled mechanical-hydraulic-gaseous effect and concise calculation

A new model entitled the coupled mechanical-hydraulic-gaseous effect and biochemical degradation for municipal solid waste (MSW) is proposed to simulate and predict the MSW settlement in this study. The coupled model can be used to simulate and predict the distributions of gas and water pressure as well as total waste settlement. Model verification indicates that because of degradation, the excess pore gas pressure increases rapidly and reaches a peak value in a short time, and then it dissipates gradually. But the excess pore water pressure may not always increase at the beginning, which depends on hydraulic conductivity of MSW. Dissipation of the excess pore water pressure is slower than that of the excess pore gas pressure. A waste settlement experiment was conducted in the laboratory using a synthetic MSW. The data was used to verify the developed model, which gave satisfactory results. Based on the experimental results, a new formula is proposed to simulate biochemical degradation.     

基于红外热成像技术烃类火灾下沉管隧道开裂分析

为了研究烃类火灾下沉管隧道的开裂深度,建造沉管隧道缩尺模型,采用HCinc升温曲线在沉管隧道左、右两侧孔内同时开展明火试验。在沉管隧道火灾试验过程中,利用热电偶和红外热像仪测量沉管隧道的温度场变化,利用红外热像仪对混凝土裂缝位置的温度变化进行监测。基于混凝土内水分迁移原理,结合混凝土裂缝中水和水蒸气的温度变化及混凝土内温度场分布,推断出在点火95 min时,混凝土裂缝开展深度超过150 mm。研究结果表明：在沉管隧道内部发生火灾的情况下,受火侧受热膨胀容易导致沉管隧道外侧混凝土受拉开裂,在沉管隧道抗火设计中,建议考虑内外侧温差导致的混凝土开裂问题。     

Ag~+-TiO_2/AC复合材料的可见光吸附-光催化协同作用

采用水热法制备活性炭负载银掺杂纳米Ti O2复合材料(Ag+-Ti O2/AC),对样品进行了TEM、XRD、FT-IR和UV-Vis表征,分析了Ag+-Ti O2/AC的微结构、吸收谱特性和掺杂银离子后的半导体带隙变化,并研究了其在可见光下对甲基橙溶液(MO)的降解性能。结果表明,水热法不需要高温处理即可得到高活性的锐钛矿相纳米Ti O2,Ag+掺杂和AC负载均明显提高Ti O2光催化剂的光催化活性,在可见光下光照180 min,0.2 g/L的Ag+-Ti O2/AC对10 mg/L的甲基橙溶液的降解率为73.7%,主要由于存在持续的活性炭局域强吸附-Ti O2光催化降解协同作用,明显提高了甲基橙的降解效率。     

低浓度废水厌氧处理的研究进展

本文展望了国内外厌氧处理低浓度废水的研究进展状况。着重介绍了厌氧滤池（AF）、厌氧流化床（AFB）、上流式厌氧污泥床（UASB）、厌氧颗粒污泥膨胀床（EGSB）、厌氧折流板反应器（ABR）和厌氧序批式活性污泥法（ASBR）等。